No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
150cc 4-Stroke Long-Case GY6 Gas...
Viewed products
Pragrammable Inner rotor ignition for Yamaha...
On the sidelines of its new product...
Replacement intake From Polini
Complete variator kit as shown for Kymco...
New triple clamp for replacement after a crash...
Stage6 R/T Base Plate for inner rotor ignition...
Reference: TH16AGY6-6308
Brand: Scootertuning.ca
Piston kit for the 180cc GY6 cylinders. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.
Reference: BT7005
Brand: Scootertuning.ca
Piston for 50cc 39mm cylinders. Delivery as shown and includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pin circlips.
Reference: BT13938
Brand: Scootertuning.ca
Complete original quality aftermarket 47mm piston for 72cc cylinders. Delivery as shown. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pin circlips.
Reference: TH16AGY6-FG6108
Brand: Scootertuning.ca
Forged Piston kit for the 170cc GY6 cylinders. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.
Reference: TH16AGY6-FG6308
Brand: Scootertuning.ca
Forged Piston kit for the 180cc GY6 cylinders. Set contains all relevant parts, such as piston, rings, gudgeon pin and circlips.
Reference: GY15016
Brand: Scootertuning.ca
Complete aftermarket piston for GY6 150 4-stroke Chinese-built models. Includes gudgeon pin, piston, piston rings, oil scraper rings and gudgeon pin circlips.
Reference: U-030
Brand: Scootertuning.ca
Reference: TH39ADIO-1538
Brand: Scootertuning.ca
Reference: TH39ADIO-1630
Brand: Scootertuning.ca
Reference: KW20913
Brand: Scootertuning.ca
Original primary gear shaft for CPI engines. This is where the rear pulleys (clutch / torque driver) incl. clutch bell will be mounted.
Reference: SCT-164-30
Brand: Scootertuning.ca
Rear axle nut for GY6 125-150cc Short/Long wheel axle.
Reference: U-087
Brand: Scootertuning.ca
Reference: 19717
Brand: Scootertuning.ca
Complete rear brake Bowden cable for Yamaha BW and MBK Booster scooters. Cable corresponds to the dimensions of the original. This cable features an inner PTFE gliding sleeve (polytetrafluoroethylene). The high self-lubricating properties of PTFE material ensure durable and smooth sliding, with no additional lubrication required. Never lubricate PTFE...
Reference: BM01520
Brand: Scootertuning.ca
Remplacement rear brake cable for PGO and Genuine Scooter.
Reference: SCT-RBC/BWS0211
Brand: Scootertuning.ca
Brake cable for the rear brake. Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted.
Reference: 25773
Brand: Scootertuning.ca
Brake caliper (mounts on bottom: Heng Tong) for various Derbi, Gilera, Piaggio and Vespa scooters. Supplied with pads. Check image prior to ordering. Item pictured is the item delivered.
Reference: L-SA91992
Brand: Scootertuning.ca
Replacement rear brake caliper for Yamaha Aerox / MBK Nitro.
Reference: BT15431S
Brand: Scootertuning.ca
Original brake lever for rear brake discs (left-hand brake lever). Suitable for all rear disc brake lever fittings. For added assurance, please check the image and compare with the required item.
Reference: GY14624
Brand: Scootertuning.ca
This brake cylinder assembly is suitable for 125 and 150cc GY6 4-stroke Chinese-built scooters with rear brake discs. Supplied complete with hand lever and brake light switch. Delivery as shown.
Reference: VC19049
Brand: Scootertuning.ca
Organic compound scooter brake pads, often used as factory-fitted items. Replacement pads that are good value for money. FA305 MCB712 DB2023
Reference: SCT-BR001
Brand: Scootertuning.ca
We can offer here Quality and Inexpensive remplacement brake shoes for Bws/Zuma 2002-2011.
Reference: VC19085
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 130x25mm. For rear brake use. (Except the Italjet Velocifero, where it is front mounted)
Reference: SCT-RB088/BK
Brand: Scootertuning.ca
Reference: GY14208
Brand: Scootertuning.ca
Complete, pre-assembled clutch unit consisting of a rear converter torque driver, torque spring, clutch housing and clutch shoes. A defective clutch unit is the most common cause of cracked belts and makes often advance by humming while driving or judder when starting.This part removed the complicated and trick mounting of the torque spring. Diameter of...
Reference: BT24017
Brand: Scootertuning.ca
Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. Suitable for all 4-stroke low-cost Chinese-built scooters. Please check the length of the original item. This cable is 190cm in length.
Reference: GY14638
Brand: Scootertuning.ca
Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. Suitable for all 4-stroke low-cost 125 or 150cc Chinese-built scooters. Please check the length of the original item. This cable is 204cm in length.
Reference: HUBYW50
Brand: Scootertuning.ca
Finally available! Rear Bws/Zuma 50 2002-2011 hub that allow to use Douglas 4x110 wheel or Aerox, Stage6, Kiesler, Gyronetics and all 3 holes rims with 3x80mm bolt pattern.The bolt size is M10 x 1.5 and the length depends on the wheel thickness.
Reference: HUBYW50FX
Brand: Scootertuning.ca
Reference: VC20198
Brand: Scootertuning.ca
Replacement taillight glass in OEM-quality for Aprilia SR 50 from 2004 to 2013. Matches the original size and dimensions. Matches OEM-No.: 8224658
Reference: VC20194
Brand: Scootertuning.ca
Replacement taillight glass in OEM-quality for Aprilia SR50 with rocket tail lights. Matches the original size and dimensions. Matches OEM-No.: 8212933
Reference: 375543
Brand: Scootertuning.ca
Reference: GY16640
Brand: Scootertuning.ca
Gearbox output shaft (wheel shaft) for GY6 125/150cc 4-stroke Chinese-built engines. This version is for vehicles with a rear drum brake. Shaft length 135mm.
Reference: GY14654
Brand: Scootertuning.ca
Gearbox output shaft - long version. For rear wheel mounting. Total length: 197mm, used for vehicles with additional swinging arm on the right-hand side. Generally scooters use 2 rear shocks and a disc brake. Toothing as per original.
Reference: SCT-R021/12
Brand: Scootertuning.ca
Replacement 12x4'' rear wheel for most of GY6 150cc scooter with rear drum brake.