No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Viewed products
With the Most magnet kill switch, we can offer...
Reference: GY14645
Brand: Scootertuning.ca
Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.
Reference: BM01004
Brand: Scootertuning.ca
Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!
Reference: SCT-021090
Brand: Scootertuning.ca
Replacement Airbox with a larger air volume ideal for cast iron 70cc engine - same foam filter than oem airbox - direct fitment (no modification required)
Reference: BM11212
Brand: Scootertuning.ca
Inexpensive replacement brake lever for PGO and genuine Scooter.
Reference: IP34482
Brand: Scootertuning.ca
Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.
Reference: IP34476
Brand: Scootertuning.ca
Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.
Reference: VC19878
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x25mm. For rear brake use on the Derbi Atlantis, Gilera and Piaggio models).
Reference: VC19077
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 95x20mm.
Reference: BM04080
Brand: Scootertuning.ca
Reference: 27242
Brand: Scootertuning.ca
One piston brake caliper for front brake inclusive pads for China, Generic, CPI, Rieju. Red in color.
Reference: KW13987
Brand: Scootertuning.ca
Aftermarket carburettor for all 2-stroke scooters with 1E40QMB engines. Minarelli replica air-cooled. Comes with electric choke.Requires a single throttle cable.
Reference: KW33762
Brand: Scootertuning.ca
Unrestricted 18mm carburettor for all 2-stroke scooters with Minarelli & chinese Minarelli clone 1E40QMB engines (Minarelli replica air-cooled) Comes with electric choke. Requires a single throttle cable.
Reference: BT16001
Brand: Scootertuning.ca
Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is a Chinese-builtcarb and matches the quality of the original item.
Reference: IP32340
Brand: Scootertuning.ca
Replacement CDI unit for Kymco Super 9 LC, Top Boy, Yager, People Dink and Grand Dink 50 scooters. Please compare your original unit with that shown in the image. Only suitable for scooters with DC ignition system. 30410-KEB7-E0B / 30410-KGB5-E0A / 30400-KFA6- E0A / 30410-KHE6-E0B / 30400-LDA5-E0A
Reference: IP31349
Brand: Scootertuning.ca
Replacement CDI unit matching factory fitted CDI suitable for Kymco, SYM and Peugeot 50cc 4 stroke scooters.
Reference: VC30942
Brand: Scootertuning.ca
Replacement clutch for various 125cc 4 stroke Kymco scooters. Clutch matches original specification.
Reference: IP32254
Brand: Scootertuning.ca
Replacement clutch with 3 shoes for maxi scooters with Piaggio 125cc 4 stroke engines.
Reference: BT7001-16
Brand: Scootertuning.ca
Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engines are factory-fitted with 2 different versions of crank. The only difference is the oil pump drive cog on the right-hand side. The old version, installed in almost all vehicles, has a 16 tooth cog. The new...
Reference: BT7001-22
Brand: Scootertuning.ca
Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engines are factory-fitted with 2 different versions of crank. The only difference is the oil pump drive cog on the right-hand side. The old version, installed in almost all vehicles, has a 16 tooth cog. The new...
Reference: IP21633
Brand: Scootertuning.ca
Very good quality aftermarket crank for Honda SYM AF28 and Kymco GR1 engines. The crank is a 100% match to the original and is an outstanding aftermarket item. Also a good everyday choice for lightly-tuned 70cc sports engines. Crank requires 12mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of bearings and...
Reference: IP12140
Brand: Scootertuning.ca
Very good quality aftermarket crank for horizontal 50cc Kymco AC, LC and SF10 engines. The crank is a 100% match to the original and is an outstanding aftermarket item. Also a good everyday choice for lightly-tuned 70cc sports engines. Crank requires 12mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of...
Reference: IP34883
Brand: Scootertuning.ca
Value replacement crankshaft for scooters with vertical Minarelli engines. Shipped with small end bearing included.
Reference: IP11998
Brand: Scootertuning.ca
Standard cylinder kit for vertical air-cooled Minarelli engines. Great price! The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder...
Reference: IP12466
Brand: Scootertuning.ca
Great price cylinder kit for air-cooled Morini engines. The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder head can be ordered...
Reference: IP34723
Brand: Scootertuning.ca
Replacement scooter cylinder head for all air cooled 50cc Minarelli engines with upright cylinders.
Reference: IP34859
Brand: Scootertuning.ca
Replacement scooter cylinder head for all air cooled 50cc Morini cylinders.
Reference: IP12013
Brand: Scootertuning.ca
Great price cylinder kit for horizontal air-cooled Minarelli engines. The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder head can...
Reference: VC24934
Brand: Scootertuning.ca
Good quality replacement drive belt for various 125, 150 und 200cc Kymco and Malaguti Maxi scooters. Dimensions: 798*20. Replaces OEM-No.: 23100KEC4900 / 51700700 / 00127785.
Reference: VC23782
Brand: Scootertuning.ca
Good quality replacement drive belt for various 125 and 150cc Aprilia, Keeway, Kymco, Malaguti und SYM Max scooters. Dimensions: 816*18.5*28
Reference: VC25529
Brand: Scootertuning.ca
Replacement drive belt for maxi-scooters with Piaggio Leader engines. Dimensions: 818-22.5
Reference: VC31160
Brand: Scootertuning.ca
Good quality replacement drive belt for Piaggio ZIP 2, ZIP 4T, Vespa ET2, LX, LXV, S50 and Vespa S50 4 stroke scooters. Dimensions: 740*19.5
Reference: BT13024
Brand: Scootertuning.ca
Standard v-belt replacement for original part. Suitable for vehicles with 10” wheels. Made in China. Dimensions: 669-18-30
Reference: BT13852
Brand: Scootertuning.ca
Standard v-belt replacement for original part. Suitable for vehicles with 12” wheels. Made in China. Dimensions: 729-17,7-30
Reference: BT15437
Brand: Scootertuning.ca
Standard v-belt replacement for original part. Suitable for vehicles with 12 or 13” wheels. Mostly used on 12” wheel vehicles with rear brake disc. On 13” models it is generally the standard size, as factory-fitted. Made in China. Dimensions: 788-18-30