No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Super light weight 3.75” round CF...
Viewed products
High Load Torque spring made in Italy by 2Fast....
The MULTIVAR is a sturdy high-quality variator...
Malossi has taken the design of performance...
Replacement O2 sensor bolt
On the sidelines of its new product...
Reference: VC18616
Brand: Scootertuning.ca
Replacement speedometer cable in original dimensions for MBK Booster and Yamaha BWs 50 scooters. Design and dual-side mounts match the original scooter speedo cable. Length from end to end: 90.5cm. Replaces OEM-No.: 72900N0HP000 / 4PAH35500200 Also suitable for the following models: KEEWAY 250 SUPERSHADOW 06=> MBK 50 BOOSTER SPIRIT EURO2 03 YAMAHA 50...
Reference: VC18608
Brand: Scootertuning.ca
Cheap speedo cable in original dimensions for motorcycles. Design and dual-side mounts match the original scooter speedo cable. Length from end to end: 96.5cm. Replaces OEM-No.: 72900BMBT000 / 44830KFA69000 / 5FMH35500000 / 4HPH35501000
Reference: VC18607
Brand: Scootertuning.ca
Replacement speedo cable in original dimensions for scooters. Design and dual-side mounts match the original speedo cable. Length from end to end: 102.5cm. Replaces OEM-No.: 00G01605021 / 0DN00G01605021 Also suitable for the following models: DERBI 100 ATLANTIS 00-06 PIAGGIO 100 DIESIS 01
Reference: VC18563
Brand: Scootertuning.ca
Replacement speedo cable in original dimensions for scooters. Design and dual-side mounts match the original speedo cable. Length from end to end: 97cm. Replaces OEM-No.: 44830-GC8-000 / 44830GC80000/44830KKD6E000 / 705609 Also suitable for the following models: HONDA 50 SCOOPY =>96 75 SCOOPY =>96 PEUGEOT 50 SC METROPOLIS SX/LM =>91 75 SC 80 SX
Reference: SCT-R20184
Brand: Scootertuning.ca
RMS speedo cable in OEM quality, availabe at a good price.
Reference: SCT-SBM
Brand: Scootertuning.ca
Reference: KW13989
Brand: Scootertuning.ca
Low-cost aftermarket kickstarter shaft [semi-circle], for 2-stroke Minarelli-based engines such as CPI, Keeway, Mawi, Longija etc. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation.
Reference: KW16652
Brand: Scootertuning.ca
Low-cost aftermarket kickstarter shaft [semi-circle], for 2-stroke Minarelli-based engines such as CPI, Keeway, Mawi, Longija etc. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation.
Reference: 32066
Brand: Scootertuning.ca
Reference: BT11004
Brand: Scootertuning.ca
The starter clutch creates the link between the starter and the crankshaft. The clutch secures the components if the motor is turned on and the engine revs are more than the starter motor revs. Crunching and knocking when starting often point towards a problem with the clutch. Leaving it could cause major damage to the engine cases. Suitable for all 139...
Reference: BT29484
Brand: Scootertuning.ca
Starter motor bendix gear bush. Dimensions: Inside Diameter 8mm. Outside Diamter 12mm. Width 8mm
Reference: GY14955
Brand: Scootertuning.ca
Grinding and mechanical noises when starting the engine are often a sign that the starter clutch is faulty. The carrier sticks and no longer releases properly. In the worst case scenario, this can be catastrophic for the motor. As many parts of the starter mechanism are inter-connected, they are all subject to a fair bit of wear. Replacing the starter...
Reference: KW15440
Brand: Scootertuning.ca
Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke engines like CPI, Keeway, Generic, Mawi, Longija etc. with 16mm crank tail shaft. Delivery is as shown. If the starter clutch is damaged, it always makes sense to replace all of the components. In a starter clutch...
Reference: NK901.14
Brand: Scootertuning.ca
Reinforced starter motor freewheel without starter sprocket, from Naraku. For original and tuned scooters with Minarelli-based, Chinese-built engines. [1E40QMB], such as CPI, Keeway, Generic etc. On high-performance scooters, this is usually the first component in the starter mechanism to fail. The starter mechanism is subjected to high forces. The...
Reference: IP32579
Brand: Scootertuning.ca
18/65 Starter drive gear for 50cc Minarelli engines.
Reference: KW14187
Brand: Scootertuning.ca
The starter clutch carrier wheel transfers the power from the starter to the clutch. If the teeth on the e-starter or the clutch are damaged, they should be replaced to avoid further damage to other newer parts.
Reference: KW14189
Brand: Scootertuning.ca
Complete starter motor incl. cables, ready to install. Number of teeth: 9 Diameter Shaft: 9mm Distance of mounting holes: 65mm
Reference: 16783
Brand: Scootertuning.ca
Starter motor for upright and horizontal 50cc Minarelli scooters.
Reference: IP33167
Brand: Scootertuning.ca
Replacement starter motor Piaggio 50cc 4T AC scooters and various geared bikes with D50B0 engine.
Reference: BM04346
Brand: Scootertuning.ca
Replacement Starter Relay for PGO and Genuine scooters.
Reference: GY14630
Brand: Scootertuning.ca
Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.
Reference: 32963
Brand: Scootertuning.ca
Steering bearings should always be replaced when changing the steering stem or if there is any movement in the steering, or a light floating is felt in the steering when riding. Always grease before fitting.
Reference: MF96.20005
Brand: Scootertuning.ca
When exchanging the fork or noticing too much play in the steering assembly, you should replace the steering bearings. This set includes all top and bottom bearings necessary. You should grease the bearings before assembling them
Reference: 16771
Brand: Scootertuning.ca
When exchanging the fork or noticing too much play in the steering assembly, you should replace the steering bearings. This set includes all top and bottom bearings necessary. You should grease the bearings before assembling them.
Reference: 28822
Brand: Scootertuning.ca
Steering head bearing set complete with bearing cups and bearings for steering column top and bottom. Steering bearings should be replaced when a yoke is fitted or when you notice play, tightness or knocking on the front end, during normal operation, it will result in a "floating" feel. Often the driver feels nothing of the creeping defect in stock. Only...
Reference: SCRUCK
Brand: Scootertuning.ca
Our most popular scooter cover will protect your stretched or lowered scooter from the elements. Super high-quality, water-resistant cover comes with a handy carrying pouch. Includes a soft liner to protect expensive custom paint jobs. Includes heat protective liner for hot vertical exhausts. Built in bungee straps for keeping cover tight on your bike....
Reference: EB023
Brand: Scootertuning.ca
Attention! Modification required, You will have to drill an additional hole each side of the scooter frame engine mount and Subframe or to weld the subframe main part on the scooter frame engine mount! Great kit to use Fatty wheel on Bws/Zuma, this subframe allow to easily move the engine to the left side, wich is required with 6'' or 8'' Fatty Wheel....
Reference: SCT-43210-F9-9100
Brand: Scootertuning.ca
Reference: UN059843
Brand: Scootertuning.ca
Reference: SCT-TS009
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with Boston Theme.
Reference: SCT-TS008
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with Detroit Theme.
Reference: SCT-TS007
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with MSLF Scooter Club from North Carolina Theme.
Reference: SCT-TS002
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with our new 2015 logo!
Reference: SCT-TS004
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with our new 2015 logo!