No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
These spoilers from Str8 are available in many great colours and can...
Naraku organic lining brake pad with KBA approval in original equipment...
Ignition holding tool universal Easyboost allows you to easily loosen...
High-quality, CNC-milled Sport Pro shock absorber from tuning experts...
Technical features: Carburettor with elastic connection (B) and...
Reference: U-094
Brand: Scootertuning.ca
Customer return - it was rubbing on the discEASY MOD TO REPAIR - CHECK PICTURES NEED TO GRIND A TINY BIT OF MATERIAL - CHEAP PRICE
Reference: 34380
Brand: Scootertuning.ca
Replacement Front Disc brake for most CPI, Vento & Keeway scooter.
Reference: IP32442
Brand: Scootertuning.ca
Variator pulley plate for Minarelli engines wit ha 13mm crankshaft taper. Pulley diameter is 94.3mm.
Reference: VC20697
Brand: Scootertuning.ca
Replacement kick-starter for various Derbi, Gilera and Piaggio scooters. Replaces OEM-No.: 286214
Reference: SCT-KS015
Brand: Scootertuning.ca
Oem style kickstart for Minarelli horizontal and vertical engine.
Reference: BM010100
Brand: Scootertuning.ca
Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!
Reference: PS00822
Brand: Scootertuning.ca
Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!
Reference: IP13502
Brand: Scootertuning.ca
Original design (Kymco style) rear view mirror set with E-mark. This mirror design is used on most 50cc Kymco and low-cost scooters or motorbikes for instance. A low-cost alternative to an expensive original item. Can also be used on any other scooter, motorcycle or quad with 8mm thread. Set contains 1x right side mirror with M8 left-hand thread and 1x...
Reference: 19002
Brand: Scootertuning.ca
Replacement oil pump for all scooters with Kymco / SYM upright engines.
Reference: U-123
Brand: Scootertuning.ca
Reference: U-124
Brand: Scootertuning.ca
Reference: 22765
Brand: Scootertuning.ca
Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the exhaust. Suitable for all scooters with new PGO engines.
Reference: U-108
Brand: Scootertuning.ca
Reference: U-017
Brand: Scootertuning.ca
Replacement Rotor for the MVT Digital Direct and Premium ignition
Reference: SCT-TM002
Brand: Scootertuning.ca
Replacement sensor for the thermometer unit.
Reference: 21753
Brand: Scootertuning.ca
Replacement speedometer drive gear for Yamaha Aerox, BWs as well as MBK Nitro, Booster scooters with 10mm wheel axles.
Reference: SCT-SP0100
Brand: Scootertuning.ca
Reference: KW13991
Brand: Scootertuning.ca
Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke engines with 13mm crank tail shaft. Delivery is as shown. If the starter clutch is damaged, it always makes sense to replace all of the components. In a starter clutch all components contact and are mutually...
Reference: IP12108
Brand: Scootertuning.ca
Complete starter clutch. The counter piece of the electrical starter is responsible for uncoupling the starter once the engine is running. If this part becomes defective and is not replaced in time, it could cause damage to the starter.
Reference: IP21377
Brand: Scootertuning.ca
Replacement, good quality starter motor for 50cc scooters from Aprilia (with Aprilia engines), Suzuki, TGB, Italjet, as well as Morini. Starter motor supplied ready to install. Performance matches the original item.
Reference: 19007
Brand: Scootertuning.ca
Complete alternator stator for carburetted Piaggio engines from 1999 onwards. Stator supplied ready to install.
Reference: BT24001
Brand: Scootertuning.ca
Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many other models. If in doubt, compare the picture with your own cable. The length of the item supplied by us is approximately 190cm.
Reference: 43026
Brand: Scootertuning.ca
Replacement Torque Driver Pins SOLD SEPARATELY
Reference: IP32433
Brand: Scootertuning.ca
Complete variator kit as shown for Kymco Agility, Like, Movie XL, People S and Super 8 125 maxi scooters. Supplied as shown with a set of 18x14 14gram rollers.
Reference: IP32438
Brand: Scootertuning.ca
Complete variator kit as shown for maxi scooters with the 125-150cc Piaggio 4 stroke Leader engine.
Reference: GY14207
Brand: Scootertuning.ca
Complete kit of all variator components for all 125cc or 150cc GY6 4-stroke Chinese-built 152/157QMI engines. The kit contains: a variator, a set of 18x14mm 12,5g variator rollers (x6), 3x sliders for the variator plate and a pulley. Supplied as shown.
Reference: BT12278
Brand: Scootertuning.ca
Variator replacement in OEM-quality consisting variator unit with back plate, weights and sliders. Made in China.
Reference: BT12012
Brand: Scootertuning.ca
Complete variator in OEM quality. The variator is supplied as shown with variator, counter-pressure plate, fixed pulley, fan, sliders, star washer and 5.6 g variator weights, 16x13mm. The original variator bush from the vehicle can still be used, but should be cleaned prior to installation. Furthermore, you can also order each sleeve separately. This item...
Reference: IP34993
Brand: Scootertuning.ca
Load resistor with 25w and 10 ohm for LED indicators. Required for any LED upgrade. The resistor evens out the missing current form the standard light and gaurantees the required flashing frequency. Note: one per side required.
Reference: SCT-REV001
Brand: Scootertuning.ca
External battery powered. Can read up to 19900RPM, and record the max RPM. Blue indication. Works with any 2 stroke or 4 stroke engine. Dimensions; 67.1mm x 35mm x 17.6mm. Comes with english instructions.
Reference: BT80013
Brand: Scootertuning.ca
Right-hand crankcase gasket - GY6 50cc
Reference: GY16361
Brand: Scootertuning.ca
Right-hand crankcase gasket - GY6 125/150cc
Reference: VC20141
Brand: Scootertuning.ca
Replacement front right indicator glass for Aprilia SR50 Di-Tech Scooters and SR50 Street models. Matches original item. Replaces OEM-No.: 8224213. Also suitable for the following models: Aprilia Leonardo 125 / 150 / 250 (99-01) Aprilia Leonardo 125 / 150 / 250 ST (01-)
Reference: VC20145
Brand: Scootertuning.ca
Replacement front right indicator glass for Aprilia SR50 Di-Tech Scooters and SR50 Street models. Matches original item. Replaces OEM-No.: 8224213. Also suitable for the following models: Aprilia Leonardo 125 / 150 / 250 (99-01) Aprilia Leonardo 125 / 150 / 250 ST (01-)