No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Pro Taper is well known for manufacturing high-quality grips and...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
The thermal grade of the spark-plug is of prime importance with tuning...
These spoilers from Str8 are available in many great colours and can...
Naraku organic lining brake pad with KBA approval in original equipment...
Ignition holding tool universal Easyboost allows you to easily loosen...
High-quality, CNC-milled Sport Pro shock absorber from tuning experts...
Technical features: Carburettor with elastic connection (B) and...
The Yasuni Z from the Spanish...
Viewed products
Complete variator in OEM quality. The variator...
Replacement kick-starter for various Derbi,...
Reference: 27796
Brand: Scootertuning.ca
Reed valve gasket for scooters with Kymco horizontal (SF10) engines.
Reference: SCT-GA001
Brand: Scootertuning.ca
Replacement reed valve gasket for all Minarelli Horizontal engines.
Reference: SCT-GA002
Brand: Scootertuning.ca
We can offer you these reed valve gasket from Motoforce for a fair price.
Reference: IP32901
Brand: Scootertuning.ca
Reed valve gasket for 50cc Piaggio and Peugeot horizontal engines.
Reference: KW13985
Brand: Scootertuning.ca
Replacement reed block with steel petals. Suitable for all horizontal Minarelli engines & CPI, Keeway, Vento.
Reference: 19978
Brand: Scootertuning.ca
Replacement rectifier regulator as shown in image. The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out.
Reference: IP32380
Brand: Scootertuning.ca
Replacement rectifier regulator as shown in image. The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out
Reference: 16782
Brand: Scootertuning.ca
Rectifier / Controller changes the AC into DC on a 12V board. This prevents bulbs from burning out. Exposure to high temperatures means bulbs often fail. If the rectifier goes, the ignition system can falter, the bulbs burn through, and the headlight flickers.
Reference: IP32344
Brand: Scootertuning.ca
The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out.
Reference: IP32345
Brand: Scootertuning.ca
The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out.
Reference: BM04341
Brand: Scootertuning.ca
Reference: BT20902
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: SCT-RR6GY6
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: TRS-R5P001
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: IP18059
Brand: Scootertuning.ca
Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleration. We recommend this set for those who nip about in traffic or if your engine struggles with drive on inclines. Fits the original clutch. Set contains 3 springs. A great product, available in various stiffness’s.
Reference: 17205
Brand: Scootertuning.ca
Good quality crank for horizontal 50cc Kymco and SYM AC / LC engines. Matches original 100%. Also suitable for lightly tuned to 70cc sports cylinders. Crank with short variator stump: approx.. 9.6cm from crank cheek, please check prior to ordering. We recommend a new set of crank bearings and oil seals be ordered.
Reference: IP32577
Brand: Scootertuning.ca
Reinforced starter motor with more power for 125 and 150cc scooters with the GY6 engine. Very good option for use on tuned engines.
Reference: BM04801
Brand: Scootertuning.ca
Stronger 11 teeth starter motor for PGO & Genuine scooters. This starter is stronger than the standard one and can pull smaller bigbore cylinders without any problems. Supplied without cable!
Reference: GY14626
Brand: Scootertuning.ca
Replacement aftermarket clutch bell. Already blued clutch bells tend mean slipping and deforming of the plates. This means the bell cannot run true, which often leads to damage in the transmission and drive systems.
Reference: GY16726
Brand: Scootertuning.ca
Jumpy drive and bad power transfer are usually signs that the clutch plates are either worn or glazed. The only solution is to change the plates. When servicing, it is a good rule to change the complete clutch, as the clutch body needs to be disassembled, to give access to the plates. Complete Asian-designed clutch. Supplied as shown and without clutch bell.
Reference: KW13965
Brand: Scootertuning.ca
Aftermarket cylinder head [combustion chamber diameter = 40mm] for 50cc horizontal Minarelli and CPI engines. Also suitable for Keeway, Generic, Mawi, Longjia vehicles with 2-stroke, 50cc 1PE40QMB engines. Attention on Chinese engines: This cylinder head uses a short thread spark plug e.g.: (NGK Type H means short thread). e.g.: BR8HSA, BR8HS
Reference: BM00590
Brand: Scootertuning.ca
Looking for replacement front pulley? We offer here inexpensive pulley for PFO and Genuine Scooter.
Reference: GY15421
Brand: Scootertuning.ca
Outer v-belt pulley for GY6 125/150cc 4-stroke Chinese-built engines.
Reference: GY14645
Brand: Scootertuning.ca
Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.
Reference: BM01004
Brand: Scootertuning.ca
Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!
Reference: SCT-021090
Brand: Scootertuning.ca
Replacement Airbox with a larger air volume ideal for cast iron 70cc engine - same foam filter than oem airbox - direct fitment (no modification required)
Reference: U-204
Brand: Scootertuning.ca
Reference: U-156
Brand: Scootertuning.ca
Reference: BM11212
Brand: Scootertuning.ca
Inexpensive replacement brake lever for PGO and genuine Scooter.
Reference: IP34482
Brand: Scootertuning.ca
Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.
Reference: IP34476
Brand: Scootertuning.ca
Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.
Reference: VC19878
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 110x25mm. For rear brake use on the Derbi Atlantis, Gilera and Piaggio models).
Reference: VC19077
Brand: Scootertuning.ca
Standard quality brake shoe set. 2x new springs supplied. Performance and design match the original. Shoe dimensions: 95x20mm.
Reference: BM04080
Brand: Scootertuning.ca
Reference: 27242
Brand: Scootertuning.ca
One piston brake caliper for front brake inclusive pads for China, Generic, CPI, Rieju. Red in color.