No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: ST-ADM001/BK
Brand: Adelin
We offer here Adelin Brake Caliper adaptor for use 4-piston caliper with 220mm disc brake. Work with Adelin, Stage6 & Voca 4-pistons Caliper.
Reference: IP23150
Brand: Scootertuning.ca
You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables.
Reference: SCTFR034
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: 243.022
Brand: Polini
Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...
Reference: 328087
Brand: Tun'R
Tun'r conical air filter with type KN structure of oiled cotton. (28-35mm connection)
Reference: SCTFR021
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: 451581
Brand: Tun'R
Tun'r offer here glue-on indicators ''Raindrop'. Stylish drop-shaped signal lights that can be glued to every smooth surface.
Reference: MF03.030
Brand: Motoforce
Complete lock set for lost keys, or defective. Cheaper alternative to original items. These lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.
Reference: MOT105881
Brand: Motul
100% Synthetic lubricant. Based on Ester-Technology designed for 2-Stroke scooter engines with premix or injector lube system, operating at high revs and under high load. Very high lubricating properties decrease friction and wear, improve power output and minimise engine internal friction. Synthetic base stocks minimise smoke and deposits. Special...
Reference: 3413034
Brand: Malossi
Replacement piston for the Mhr Bigbore 86cc cylinder kits
Reference: IP10971
Brand: Scootertuning.ca
Good quality aftermarket crank for horizontal 50cc Minarelli AC and LC engines. The crank is a 100% match to the original and is an great aftermarket item. Also a good everyday choice for lightly-tuned 50cc sports engines. Crank requires 10mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of bearings and oil...
Reference: 339780
Brand: Malossi
A large A3 sticker set from Malossi with different stickers like the Malossi Lion, MHR logo etc
Reference: IP10979
Brand: Scootertuning.ca
Very low-cost replacement intake manifold, 21mm carb connection just like the original one.
Reference: SCT-GA004
Brand: Scootertuning.ca
Replacement gasket that will be fitted below the alternator stator. Some trimming could be required in some cases.
Reference: 15500
Brand: Scootertuning.ca
39mm clutch nut M28x1 (central nut under the clutch bell). Suitable for Minarelli, Kymco, Peugeot, Honda engines and many more.
Reference: SCT-TC190/PWK
Brand: TRS
78 inch black throttle cable measured from bend to bend. adjuster cable built into cable. see pics for all the details. tested and made in the u.s.a. don't forget to lube all cables with cable lube, wd-40 , or oil. all cables come dry and should always be lubed.
Reference: MF12.00001
Brand: Motoforce
High-quality spark plug connectors and cables. Both connectors have 90deg angle and are made of rubber or plastic
Reference: SCTFR022
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: SCT-KY
Brand: Scootertuning.ca
Beautifully crafted Scooter Tuning rubber keyring with the well-known Scootertuning.ca Logo now available. It's also a pretty cool present. Dimensions: 3in x 3/4in
Reference: YA-S001
Brand: Yasusu
High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.
Reference: 482337
Brand: Tun'R
Tun'r conical air filter with type KN structure of oiled cotton. (28-35mm connection)
Reference: 1200-1244.10
Brand: NCY
Light-weight performance drive face for the Honda Ruckus. Squeeze out a few more RPM by slightly reducing your rotational mass. Physics! Weighs 73 g (1 oz less than stock!)
Reference: 668102B
Brand: Malossi
This new small end bearing has been designed specifically for the MHR Team crankshaft.
Reference: 5111597
Brand: Malossi
When the technology makes the difference. Multivar : the sport transmission with the racing acceleration that can't be beat! A jewel to mount on your scooter. Too bad it can't be displayed, it is so perfect! Designed by engineers with great experience, produced entirely in the Malossi factory, utilizing robots with the highest precision. Include 19x15.5mm...
Reference: BZA30418
Brand: Scootertuning.ca
Vacuum controlled petrol cock / fuel tap for MBK Booster and Yamaha BWs scooters. Faulty fuel taps often lead to starting and running problems due to lack of, or too much fuel. Always best to replace the whole unit to solve the problem.
Reference: MF60.16616
Brand: Motoforce
We can offer you these inexpensive replacement brake parts for scoots with brake drum at the rear, which are usually hard to come by.
Reference: S6-35035
Brand: Stage6
A small 2-layer Racing air filter from Stage6, exactly like you know it from the Scooter Attack Dragster and the Stage6 Racing Zips at the IDSM. Very good air flow and high filtering effect due to two overlapping foam layers with different porosities. Included in this kit are adaptors for nearly all common sizes (28mm, 35mm, 42mm, 45mm, 49mm, 55mm).
Reference: 343.0019
Brand: Polini
For those models, where it is difficult to get to the choke lever of the PWK carburettors from Motoroforce, this adaptor allows for converting to choke cable. We recommend using a fitting choke cable from Stage6 or Polini.
Reference: S6-5516600
Brand: Stage6
The Stage6 WingCooler clutch bell - a strengthened clutch bell with patented cooling concept. The air flows through the side fins and the enlarged drills to the clutch lining. This results in longer life for the clutch and reduced clutch slip when the engine is warm. The bell's temperature will be considerably lower, which leads to less waste energy and...
Reference: 0812036
Brand: Malossi
Malossi Minarelli torque corrector spacer set.
Reference: 329853
Brand: Teknix
The Teknix oil seal set includes both oil seals for the crankshaft in the well-known OEM quality.
Reference: 298740
Brand: Malossi
Clutch springs for sport & racing clutches. Harder clutch springs result in clutch engagement at higer revs (and therefore higher power development) and gives much better acceleration from standstill.
Reference: IP34993
Brand: Scootertuning.ca
Load resistor with 25w and 10 ohm for LED indicators. Required for any LED upgrade. The resistor evens out the missing current form the standard light and gaurantees the required flashing frequency. Note: one per side required.
Reference: NK900.84
Brand: Naraku
Replacement star washer / shim from Naraku for securing the outer variator pulleys. Corresponds to the size and design on the original. For all horizontal and upright Minarelli engines.
Reference: S6-3216800
Brand: Stage6
No matter which carburettor you want to use -the Stage6 intake system is your choice! Contrary to the parts of other manufacturers who use their own reed blocks, the Stage6 Bigvalve system is based on a reed cage for horizontal Minarelli engines. This allows for great opportunities to optimise performance by using different reed blocks such as the Stage6...
Reference: S6-5155013
Brand: Stage6
Setting up variator and clutch are of prior importance for optimal shifting characteristics and for a fast engine. In order to match the variator to the drive belt width and thus obtain excellent acceleration, you will need these washers. They will be placed between the fixed front pulley and the bushing, this way adjusting the distance between variator...