No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
How best to exploit the Minarelli...
Reference: NK100.30
Brand: Naraku
The NARAKU 50cc cast iron cylinder kit is an affordable and robust alternative for those who require a replacement due to cylinder or piston damage. The power output is somewhat higher than on the original barrel. Very good value for money, simple replacement cylinder kit. Supplied with gasket set; the original head is retained. Parts for this kit can be...
Reference: 617215
Brand: Malossi
Malossi usually offers excellent and well thought-out tuning parts. Unfortunately, the Kevlar fibres lead to a slipping of the drive belt especially when starting up the engine, when the transmission ratio is very low and a lot of force gets transmitted onto the rear pulleys. Using a stronger contra spring and readjusting the vario is essential....
Reference: 298360.W0
Brand: Malossi
We can offer various torque springs from Malossi. The main thing about adjusting an engine is to find the right combination of torque spring, variator weights and clutch springs. If the drive belt slips, you will have to go for a stiffer torque spring. On the other hand, choosing a spring that is too stiff will also reduce power output. If you have any...
Reference: S6-5916605
Brand: Stage6
The Stage6 Pro drive belt is an inexpensive high quality drive belt produced by Bando in Japan. It has optimised grip characteristics that guarantee excellent power transmission.
Reference: 353-0579
Brand: Maxima
A high performance synthetic blend for both injector and premix use. Special synthetic lubricants and advanced additives provide for outstanding engine performance and protection while maintaining excellent engine cleanliness and eliminating exhaust smoke. Exceeds API-TC and all manufacturer’s specifications.
Reference: 070103/1
Brand: Athena
This is the complete gasket set for Athena Sporting and Evolution 70cc cylinders minarelli vertical. Check the picture to see which gaskets are included.
Reference: SCTFR006
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: S6-8016601
Brand: Stage6
The Stage6 HPC (high primary compression) crankshaft is a full-circle crankshaft, and as such increases primary compression in the crankcase. It has been developed in cooperation with F. Koopmans and is completely made of metal (i.e. no plastic padding). The bearings can handle up to 16,000 rpm! Made in Italy.
Reference: 316.0011
Brand: Polini
Polini offers here choke lever with 60cm cable. The choke lever can simply be mounted on the carburettor choke piston. Available in black, chrome and blue.
Reference: SCT-GA010
Brand: Scootertuning.ca
We offer here replacement Gearbox cover gasket minarelli horizontal & vertical engine.
Reference: 249.047
Brand: Polini
Polini offer here the little brother of the 3G For race Clutch. Clutch engagement can be adjusted by exchanging the supplied springs. For adjustment, you need to replace the clutch springs.
Reference: 4615434
Brand: Malossi
Oil-gas shock absorber with adjustable spring preload, 35 mm longer wheelbase in comparison with original shock absorber. This range of shock absorbers was born thanks to Malossi to offer their customers a range of products of superior class, capable of granting great riding comfort coupled with matchless driving safety. The technical characteristics of...
Reference: 0609380
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segments. The silencer mounting has been changed and the exhaust now comes with a black rear silencer
Reference: SCT-GA002
Brand: Scootertuning.ca
We can offer you these reed valve gasket from Motoforce for a fair price.
Reference: KO-E003G2335B
Brand: Koso
The advantages of racing air filters should be known by now. The KRS is a budget filter which looks very nice too. In addition to that it increases airflow to the carb. The transparent cover makes sure the filter doesn't get soaked by water. With the 90deg bend it will fit most scooter models. Connection rubber fits all Dellorto carbs from 12mm to 21 as...
Reference: MF60.16602
Brand: Motoforce
We can offer you these inexpensive replacement brake parts for scoots with brake drum at the rear, which are usually hard to come by.
Reference: 538855
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Reference: SCTFR007
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: 16783
Brand: Scootertuning.ca
Starter motor for upright and horizontal 50cc Minarelli scooters.
Reference: YA-S004
Brand: Yasusu
High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.
Reference: YA-S002
Brand: Yasusu
High quality replacement shock absorber made by Yasusu, Taiwan based factory. Stiffness can be adjusted by twisting the bottom end of the shocks. The T1 model is available in black with the red or black spring.
Reference: 323783
Brand: Doppler
Doppler offer here clutch springs for all original type and performances clutches having a diameter of 105 and 107mm. Inlude 3 springs sets (9 springs) with different hardness : +15%, + 30% and + 50%. Yellow = Medium, Red = Hard, Blue = Very hard
Reference: 343.0018
Brand: Polini
You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables.
Reference: T9907770
Brand: Top performances
Best quality made by Bando to TopPerformances' specification, on our dyno this one here proved better than any other product in terms of performance.
Reference: SCT-R20184
Brand: Scootertuning.ca
RMS speedo cable in OEM quality, availabe at a good price.
Reference: MF60.16603
Brand: Motoforce
We can offer you these inexpensive replacement brake parts for scoots with brake drum at the rear, which are usually hard to come by.
Reference: TH52ADIO-120
Brand: Scootertuning.ca
120mm stainless cylinder studs for Honda Dio/Elite AF16-AF18.
Reference: TUB307
Brand: Yasuni
The big brother of the Yasuni Z ! Thanks to a larger expansion chamber and wider downpipe diameter, the Yasuni R is the ideal complement for 70cc sport and racing aluminium cylinders such as Athena Sporting and Stage6 Sport pro, but also very good with 70cc cast-iron sport cylinder kit. This exhaust is equipped with a classy Aluminium silencer, but also...
Reference: 166.0074
Brand: Polini
The Polini Sport 70cc is a very durable high-performance cast iron cylinder for everyday use. This kit is known for its impressive top speed considering the category it belongs to, and even more for its excellent performance at low and mid rpm range. The perfect cylinder if you want to pull wheelies! It can be used with the original carburetor. Note :...
Reference: 6111121
Brand: Malossi
New version since November 2006. This is the complete rear pulley from the Malossi Hyper Racing (MHR) series. Contrary to the old version, this one comes with both halves manufactured by Malossi and can simply replace the original pulley.
Reference: 316.0012
Brand: Polini
Polini offers here choke lever with 60cm cable. The choke lever can simply be mounted on the carburettor choke piston. Available in black, chrome and blue.
Reference: 318562
Brand: Malossi
(10mm Gudgeon pin) Malossi also offers a cylinder with a bore of 40mm. Thanks to optimized port durations and an enlarged exhaust port, this grey cast iron cylinder yields about 2-3 hp more than the stock cylinder. The cylinder comes complete with gaskets, piston and head. Works very well with exhausts such as Yasuni Z or Laser Xpro.
Reference: 0900-1078.10
Brand: NCY
Two prong high tension coil. Provides solid and consistent spark and increased ignition power. Fits most GY6 125 and 150cc engines, as well as Honda Ruckus. This also includes the spark plug cap!
Reference: 323999
Brand: Doppler
Torque springs are important for the transmission set-up. The spring transfers pressure onto the torque driver and so strongly influences the vario's "shifting" characteristics. You'll know that it's necessary to go for a stronger spring when the drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps...
Reference: 480756
Brand: Tun'R
These sport air filters from TunR with their classic open design are very popular. They increase airflow and make it necessary to re-jet the carburettor. Available with 90° angle connection.
Reference: 372.0003
Brand: Polini
Polini set carburetor idle jets suitable for Keihin PWK carbs.