No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
We can offer here Quality fairing for...
Reference: IP12714
Brand: Scootertuning.ca
A low-cost aftermarket part for defective kick-start shafts. Item matches design and size of the original.
Reference: 25762
Brand: Scootertuning.ca
Carrier sprocket that matches the dimensions of the original.
Reference: A366415
Brand: Tun'R
Reference: NK950.01
Brand: Naraku
Naraku Sport-o racing clutch. Solid sports clutch that engages 1500-2000 rpm higher than standard, meaning better drive and traffic light starts. Kevlar reinforced clutch blocks ensure even longer life for standard to medium race-tuned engines. For engines over 14 bhp, there are clutches with greater adjustability, such as the Stage6, Malossi or Polini...
Reference: NK102.82
Brand: Naraku
Replacement cylinder head from Naraku suitable for air-cooled horizontal Minarelli 50cc cylinders and CPI, Keeway scooters with 1E40QMB / 1PE40QMB engines (Minarelli clone). The cylinder head fits on the original cylinder and replica 50cc cylinder kits from other manufacturers. Attention on Chinese engines: This cylinder head uses a short thread spark...
Reference: GY15438
Brand: Scootertuning.ca
V-belt in the dimensions 835-20-30 suitable for GY6 125/150cc engines with long blocks
Reference: 17636
Brand: Scootertuning.ca
This system is used mainly in water sports (jet ski etc.). Simply attach the emergency kill switch to the handlebar. The purpose of this kill switch isn't solely cosmetic, it also is very useful when falling: the ignition is immediately switched off so the engine doesn't suffer any damages. You can also use it as an unobtrusive immobilizer.
Reference: BPR7HS-6422
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: MF45.0001
Brand: Motoforce
Quick action simply means that it takes a shorter stroke, and in turn reduced wrist rotation, to go from zero to wide open. This is very helpful in racing engines with bigger carburetors as the slider is opened more quickly and might give you more power quick enough to win. It is equally useful for everyday riders as it is simply easier on the wrist and...
Reference: BT27365
Brand: Scootertuning.ca
72cc (47mm) kit for all 50cc 4 stroke Chinese scooters which use the GY6 139QMA/QMB engines and Kymco 4T. A low cost performance upgrade to stock 50cc engines. Carburettor will need up jetting (approx 10%). Kit is supplied with required top end gaskets, barrel, piston, rings, pin and clips.
Reference: 29511
Brand: Scootertuning.ca
GY6 DC Type Racing CDI with rev limiter removed. This CDI has a power-optimized ignition curve and forms the ideal basis for further tuning measures, such as the use of a Big Bore Kit.
Reference: 04-137
Brand: Scootertuning.ca
Replacement H4 12V 35W headlight bulb with P43t base. Please compare item specifics with your current bulb for compatibility.
Reference: 21745
Brand: Buzzetti
Micrometre-measuring screw allows you to find TDC (top dead centre) in the piston stroke. A must for tuners! Allows for precise tuning of ignition points.
Reference: MOS015978PIE
Brand: Most
With the Most magnet kill switch, we can offer you a state-of-the-art product as it is used in motorsport. Nevertheless, it can also come in handy if you only use your scooter to commute from A to B, as it can be used like a small but effective immobiliser: it prevents the engine from being started when the ignition lock has been short-circuited.
Reference: W549.20.32
Brand: Wurth
Heavy duty hose clamp, can be used on most 23mm intakes, 15x22mm coolant hoses, etc.
Reference: 9926560
Brand: Top performances
86cc Big Bore cylinder available for a very good price! With an excellent reputation, Top Performances came up with this 86cc Aluminium Tuning Kit for scooters with horizontal Minarelli LC engines. The cylinder is made of Nikasil-plated aluminium with a 50mm diameter, has 6 transfer ports, a bridged exhaust port and a modular high compression cylinder...
Reference: 619733
Brand: Malossi
New version since November 2006. This is the complete rear pulley from the Malossi Hyper Racing (MHR) series. Contrary to the old version, this one comes with both halves manufactured by Malossi and can simply replace the original pulley.
Reference: S410480200012
Brand: Athena
Athena has designed a complete range of air filters for Off-Road ATV, and scooters that are manufactured by using open cells polyurethane. These high quality air filters guarantee a perfect filtering combined with an excellent air flow in each condition of use. Made in Italy.
Reference: 343.0032
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: 3KJ-2171L-00
Brand: Scootertuning.ca
Reference: TH18ADIO50-AL0.5
Brand: Scootertuning.ca
Cylinder base gasket 0.5mm for AF16-AF18 50mm cylinder kit.
Reference: BT24001
Brand: Scootertuning.ca
Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many other models. If in doubt, compare the picture with your own cable. The length of the item supplied by us is approximately 190cm.
Reference: S6-0607
Brand: Stage6
For race riders and mechanics alike: Stage6 Environmental Bike Mat MKII. The perfect mat for events, races and custom shows or for your workshop at home. Environmental requirements on and around race tracks are becoming more and more strict, and spilled oil or other vehicle fluids represent major soil and water pollutants. Many race organizations have...
Reference: 318460
Brand: Malossi
Malossi's most powerful cylinder for the public (ok, there is the MHR team, which costs an arm and a leg). Bore 47.6mm, power up to 20-21bhp. 6 transfer ports. This cylinder will need to be used with a racing crankshaft compatible with 12mm gudgeon pin.
Reference: 203.0162
Brand: Polini
We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: 1CD-F582T-10-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: TFC-002
Brand: TFC
Oversize complete ZX CVT kit for AF16-AF18 engine. Including Variator, Torque Drive, Clutch, Clutch Bell and Front Pulley. The perfect kit for someone looking for complete ZX transmission. Front pulley is one of the best on the market. Clutch bell is also awesome. Top quality kit! Attention : 654-18-30 or 669-18-30 Drive belt required.
Reference: TRS-HA001/BK
Brand: TRS
Billet adjustable handlebars with 31mm clip on bars included. These have been machined to fit the battery box not like others on the market. Body constructed out of solid! Billet 6061 aircraft grade aluminum. Main body is 1 piece for strength and safety see pictures. Comes with stainless hardware and u washer. Bolts onto the stock / oem triple tree stem...
Reference: VC18523
Brand: Scootertuning.ca
Complete lock set for lost keys, or defective. Cheaper alternative to original items. These lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.
Reference: MVT-EXT120
Brand: MVT
The MVT External Rotor Ignition Millenium is an excellent alternative if you want to replace your original ignition unit, while maintaining a 12 V supply for the lights.
Reference: 5PJ-H3976-02-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 3KJ-2171M-00
Brand: Scootertuning.ca
Reference: VC19169
Brand: Scootertuning.ca
Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single brake lever in desired colour supplied. 53175-GN2-930 / 53175-GN2-90N1 Suitable for the following models: HONDA 75 SA Vision 75 (91, 93, 98) right
Reference: ST-LOWFK-RE
Brand: Ruckhouse
We offer here slammed low down fork legs for Honda Ruckus. Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with TRS front Hub, TRS front wheel, Adelin 220mm Disc Brake, RRGS Caliper bracket and finally Adelin 4 Pistons Caliper. Fork lenght : 300mm / Shaft Diameter...