No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Reference: GY6-01054-61wf
Brand: Taida
High Quality 171cc Taida Cylinder kit with Forged piston which offer better durability and reduced friction. The bore is 61mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). No Boring Required !
Reference: BM04346
Brand: Scootertuning.ca
Replacement Starter Relay for PGO and Genuine scooters.
Reference: NK101.74
Brand: Naraku
Naraku big bore cylinder kit with 60cc bore engine for scooters with 50cc Minarelli 4-stroke engines. The 42mm cylinder provides a noticeably better torque compared to the 38mm original cylinder. The Naraku cylinder is used with the original 38mm cylinder head. Not alteration to the crankcase is required. Delivery includes: Cylinder, piston, piston rings...
Reference: T9906042
Brand: DR
Replacement piston for the Top trophy 70cc cylinder kits
Reference: 3112044
Brand: Malossi
Because of the strict eco regulations, injection systems have now started to appear on some two-stroke engines. Unfortunately the large tuning firms have yet to respond to the challenge posed by the latest technology in a convincing manner. Malossi was the first to supply a cylinder kit with all electronic parts to remap the injection. If combined with a...
Reference: D1148/BK
Brand: Adelin
We can offer here complete brake master cylinder and cable lever unit for scooter with front and rear disc brake. Great part with Stage6 switch unit ! Available in black.
Reference: S410485320007
Brand: Athena
The Racing Corsa Crankshaft and 12mm Pin is one of the fundamental components for transmitting motion: its design and production must be carefully cared for to guarantee maximum performance and reliability.The new Racing Horizontal Minarelli Crankshaft is the result of studies and tests carried out by Athena's Technical and R&D Office, to obtain...
Reference: 1300-1070.10
Brand: NCY
NCY intake manifolds offer a smooth bore and larger inlet diameter over stock. Combined, these two assets allow more air and more fuel into your cylinder, giving you more power. Intake manifold upgrades are a must for larger carburetors. It doesn't make sense to install a large carburetor only to have its flow restricted by the manifold. Larger manifolds...
Reference: 0800-1140.1
Brand: NCY
This Honda Ruckus handlebar stand is designed to work with NCY's 28mm (1'' 1/8) Fat Bar Habdlebar.
Reference: 170.0301
Brand: Polini
Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricated by the gearbox oil. This item has a ball bearing and needle bearing set up and massively reduces the amount of friction. The following bearings are fitted to the transmission cover: 6203 C4 (17x40x12) HK1412...
Reference: 209.0465
Brand: Polini
This is the complete gasket set for Big Polini Evolution cylinder kit. Check the picture to see which gaskets are included.
Reference: PI-1A013579
Brand: Piaggio
Reference: SCT-EIB812
Brand: Scootertuning.ca
Looking for Briggs and Stratton muffler? we have them! Heavy duty 3/4 id openining (4-8 HP). Muffler canister 5.25" long. Cut off your oem Ruckus or Met muffler and weld this on. Makes great power! Paint it with high temp black and you are ready to roll.
Reference: SCT-BD012/BL
Brand: Scootertuning.ca
We offer here TWPO 220mm brake disc, the perfect brake disc in conjuction with TRS front hub and NCY, RRGS or lowdown Ruckus fork.
Reference: RH-196
Brand: Ruckhouse
Our CVT includes a .13″ THICK Stainless Steel ‘backing plate’ to help prevent case cracking along with covering the ugly insides of the stock swing arm, a billet machined decorative front plate, and billet aluminum machined standoffs that hold the decorative plate out from the swing arm for that custom look. The plates come RAW, ready for you to paint,...
Reference: 0609161
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segments. The silencer mounting has been changed and the exhaust now comes with a black rear silencer.
Reference: S6-5214002
Brand: Stage6
These black-coated torque springs from Stage6 are available in different strengths. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can't feel any acceleration. The strength of a torque spring is marked on the spring itself so you won't have any...
Reference: 4DY-E2611-00-00
Brand: Yamaha
Yamaha OEM replacement part. Original replacement air fan for the Yamaha Bws/Zuma rotor.
Reference: MF96.90029
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: 19978
Brand: Scootertuning.ca
Replacement rectifier regulator as shown in image. The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out.
Reference: 3XG-F5919-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5PJ-F7111-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK100.04
Brand: Naraku
High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Kymco, SYM and Honda engines. Delivery as shown, including: piston rings, gudgeon pin and circlips. Special molybdenum coating for protecting the cylinder and piston during the run-in period. It is a good rule to change the piston in a 50cc 2-stroke engines after about 6,000...
Reference: 32101
Brand: Rms
Cylinder cover for air cooled MBK, CPI. Generic, Keeway, Longjia and AC Minarelli horizontal engines. This is an essential part of the cooling system on air cooled bikes, if you cover is missing or damaged, this could result in overheating.
Reference: NK900.50
Brand: Naraku
Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpm. The current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength. Torque springs are available in packs of 2 or 3 or are available to purchase individually. Replacing the spring is necessary when tuning engines, the...
Reference: BT20001
Brand: Scootertuning.ca
Replacement intake manifold for all GY6 50cc 139QMB/QMA 4 stroke engines to original OEM standards. Supplied with clamp and O-ring.
Reference: BM09511
Brand: Scootertuning.ca
Replacement handlebar switch for PGO and Genuine Scooter.
Reference: 1117473
Brand: Malossi
Replacement gasket set for the Malossi 79cc piaggio 4 stroke cylinder kit.
Reference: TUB418
Brand: Yasuni
The Yasuni Z from the Spanish manufacturer Yasuni is an absolutely high performance exhaust when combined with 50cc and 70cc sport cylinders. Similar performance characteristics as the Hebo Performer or Polini Funky. This exhaust is equipped with a classy aluminium silencer. Good performance and amazing sound.
Reference: S6-8018600
Brand: Stage6
High quality tuning parts from Stage6: Stage6 HPC Crankshaft for PGO Big Max / T-Rex, the perfect crankshaft for sport and racing cylinders. It was developed for tuned engines and is suitable for lightly tuned sport set-ups up to high-performance racing cylinders. The high quality crankshaft is completely made of metal, the counterweight inserts are also...
Reference: MF60.19854
Brand: Motoforce
Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.
Reference: A365997
Brand: Tun'R
Reference: 3216586
Brand: Malossi
Malossi offer here great performance exhaust without the inconvenience of the racing exhaust noise. This is a quite unobtrusive exhaust that looks exactly like the original but has quite some extra power and better torque. Exhaust come with restriction that can be easily removed for better performance. Great match with 50cc and 70cc Sport cylinder kit.
Reference: 619733
Brand: Malossi
New version since November 2006. This is the complete rear pulley from the Malossi Hyper Racing (MHR) series. Contrary to the old version, this one comes with both halves manufactured by Malossi and can simply replace the original pulley.
Reference: SCT-GB0066/R
Brand: SKF
Renforced Gearbox bearing set for Genuine and Pgo scooters. The kit is made of SKF high quality bearings.