No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Malossi offer here great performance...
Reference: 21745
Brand: Buzzetti
Micrometre-measuring screw allows you to find TDC (top dead centre) in the piston stroke. A must for tuners! Allows for precise tuning of ignition points.
Reference: NK151.09
Brand: Naraku
Generator cover gasket with exact fit. Designed to replace the factory installed gasket.
Reference: 537891
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Reference: 1CD-F582T-10-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: IP33167
Brand: Scootertuning.ca
Replacement starter motor Piaggio 50cc 4T AC scooters and various geared bikes with D50B0 engine.
Reference: BT24001
Brand: Scootertuning.ca
Throttle cable to fit most Chinese-built 4-stroke scooters, e.g. Rex RS 450, Capriolo MKS Ecobike, Baotion BT50QT-9, BT49QT-9, BT49QT-12 and many other models. If in doubt, compare the picture with your own cable. The length of the item supplied by us is approximately 190cm.
Reference: GY18249
Brand: Scootertuning.ca
Complete engine gasket set for 125/150cc GY6 engines (152QMI). Contains all relevant gaskets. Cheaper than individual purchasing. Does not include engine shaft seals, we offer these as a separate set.
Reference: TRS-AO1265
Brand: TRS
Ultimate GY6 transmission CVT Cover for those big power motors! After the original CVT Cover, There is the NEW Ultimate CVT cover. This CVT Cover still includes a .13" THICK Stainless Steel 'backing plate' to help prevent case cracking, along with covering the ugly insides of the stock swingarm, a billet machined decorative front plate, 6 billet aluminum...
Reference: TRS-BSR001/BK
Brand: TRS
TRS newly designed Step Rails made from 6061 Billet Aluminum are made specifically for the NCY V2 tank covers. We recommend using nylock nuts instead of the stock tank tabs. Made in the USA.
Reference: NK100.33
Brand: Naraku
Crankshaft bearing set from NARAKU, consisting of crankshaft bearings for both sides and matching oil seals. The name of the bearings already tells you all you need to know about the durability. Only high-quality Japanese bearings from NTN or Honda with a clearance of C3 are used. With these bearings, your engine will be ready for anything, everyday use...
Reference: S6-0607
Brand: Stage6
For race riders and mechanics alike: Stage6 Environmental Bike Mat MKII. The perfect mat for events, races and custom shows or for your workshop at home. Environmental requirements on and around race tracks are becoming more and more strict, and spilled oil or other vehicle fluids represent major soil and water pollutants. Many race organizations have...
Reference: LMCR9EH-9
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: 318460
Brand: Malossi
Malossi's most powerful cylinder for the public (ok, there is the MHR team, which costs an arm and a leg). Bore 47.6mm, power up to 20-21bhp. 6 transfer ports. This cylinder will need to be used with a racing crankshaft compatible with 12mm gudgeon pin.
Reference: 1000-1373.6
Brand: NCY
These forks make a great upgrade to the clapped out stock tubes you’ve been running. Enjoy the smooth ride, improved handling and some fresh, delicious chrome! They have a 26mm tube and work with 10 mm axles and front disc brakes. They fit Zuma 50F, Eton Beamer and CSC go, among others.
Reference: VAR001-01
Brand: Yasuni
On the sidelines of its new product developments for 4 stroke engines, YASUNI does not forget the 2 stroke. YASUNI is entering a new phase in the market for performance for scooter, starting with the launch of a brand new range of 2-stroke scooter variator. Following the same spirit and the values that built its reputation: Maximum benefits, reliability...
Reference: 485252
Brand: Doppler
We can offer here thisDoppler air foam ''high density'' Universal (200MM X 300MM) to be cut! The first layer consists of a dense foam and the second layer is made to trap the remaining impurities and allow better air flow.
Reference: HOODYS6RT/
Brand: Stage6
New editions of the coveted hoodies with Stage6, Stage6 R/T and “Scootertuning is not a crime” logos are now available. The logos are screen-printed on the front. Material: 65% cotton, 35% polyester
Reference: 248.037.2
Brand: Polini
Polini Evolution drive belt, Kevlar-reinforced for longer belt life. For Polini variators Evolution and Speed Drive Evolution or other oversize variator systems.
Reference: S41PLAT015
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: MF73.14023
Brand: Motoforce
Affordable drive belt from Motoforce Racing in a reinforced Kevlar composition. This high-quality drive belt is second to none; it offers good power transmission with sport and midrace engines as well as long service life. w18.4mm / h8.2mm / l805mm
Reference: 33-707
Brand: Durabatt
Made using nanotechnology gel electrolyte. Leak proof, even with a broken container, due to gel consistency. Extends battery life up to 150%. Double the shelf life of an acid battery. The electrolyte is added at the factory, so there’s no need to add acid to this battery.
Reference: 173.0016
Brand: Polini
Polini especially designed CNC Boost Bottle made for 70-100cc engines. Like the Doppler version, it has a solid chamber, which prevents the airstream from oscillating back and forth through the carb's venturi when throttle is lowered, hence the airstream is only charged with fuel once which improves pick-up when throttle is opened. This way your scooter...
Reference: TRT-4002
Brand: 2Fast
From 2Fast, Italy: Crankshaft 2Fast 39,3mm / 85mm Minarelli LC, high-end racing crankshaft for ambitious tuners. For 70cc setups.The crankshaft was developed for the 70cc cylinders by 2Fast. It can of course also be used with other racing cylinders. The crankshaft has a stroke of 39,3mm (original) and a 85mm connecting rod. By using a different small end...
Reference: 5PJ-F4730-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5ST-E7653-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK900.26
Brand: Naraku
The NARAKU HS High Speed Variator is an evolution of one of the most successful variators for 4-stroke vehicles. The design of the weight surface yields maximum torque and top speed. The secret of a good variator is in the ability to hold the revs in the upper range for a long period of time. In this area, the HS-variator is one of the best variators for...
Reference: BM042754
Brand: Scootertuning.ca
Reference: 517073
Brand: Malossi
The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package are a torque spring and a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wider range.
Reference: NK100.73
Brand: Naraku
The V.2 cast iron cylinder kit from Naraku for all air-cooled horizontal Kymco engines (SF10) is a high-performance 70cc kit that won’t sit down and beg. The cylinder features 6 overflow ports and a large oval outlet port. The kit can be used with the original head. The cast iron construction means this cylinder is great value for money. Due to the...
Reference: 9931330
Brand: Top performances
Replacement piston for Top Performances Black Trophy 70cc cylinder kits.
Reference: MF24.19504
Brand: Motoforce
A high-quality replacement piston from Motoforce available at a fair price. Suitable for original cylinders! Comes with piston rings, pin and clips.
Reference: P15003
Brand: Replay
Reference: S6-802057
Brand: Stage6
High quality silver small end bearing from Stage6 for many common engines. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. In addition to the common sizes, we also offer an extra-wide 10mm bearing. With some cylinder kits, the bearing has too much play and may wear unevenly....
Reference: 171.0523
Brand: Polini
Universal engine kill switch button from Polini.
Reference: W549.20.32
Brand: Wurth
Heavy duty hose clamp, can be used on most 23mm intakes, 15x22mm coolant hoses, etc.