No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
150cc 4-Stroke Long-Case GY6 Gas...
Reference: 1CD-H3340-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: S4C04760007A
Brand: Athena
Replacement Athena Sporting piston kit 70cc – Dio/Kymco/Sym upright
Reference: 676458
Brand: Malossi
Racing transmission with ratio of +15%. A must for tuned engines. Power alone is not enough, you need to get it to the ground. Not recommended for untuned engines.
Reference: 0307055
Brand: Tecnigas
4-stroke exhaust system from Tecnigas. Fits all scooters with 50cc 4-stroke Piaggio engines with 4V. The exhaust has performance similar to the Tecno Straight and a good fit . Original look, low sound. Supplied without E-certification.
Reference: FLP-005
Brand: FLP
Our newest edition to our Lusso line up. Billet side rails with open pockets to show case you nee paint and contrast the CNC machined aluminum. 3/8 risers are included to slightly lift the rails so you don’t scratch your tank. These do clear the new ncy gas tank covers
Reference: 277440.C0
Brand: Malossi
These are reed valves designed with flow corner and with calculed capacity section. The petals are made of a material composed of karbonit and carbon.They are manufactured with advanced production processes and with the use of raw materials carefully selected. These reed valves are designed for racing engines and they have been tested directly on race...
Reference: S4C04760009-10
Brand: Athena
Replacement piston for the Athena Hyper Race kit Minarelli Horizontal / Vertical.
Reference: 3518143B
Brand: Malossi
Reference: GY14635
Brand: Scootertuning.ca
Standard CDI ignition unit as factory-fitted.
Reference: P10275
Brand: Replay
Reference: 19738
Brand: Scootertuning.ca
Replacement front headlight bulb for two-wheeled vehicles as well as quads/ATV’s with BA20d base. 12V bulb with 25/25W. Please check your item against the image for added assurance.
Reference: MF99.00106
Brand: Motoforce
A set of 3 levers from Motoforce; necessary to install and remove tyres.
Reference: SCHS-202
Brand: Scootertuning.ca
Set of 4 socket screws, Zinc plated grade 12.9 for a rear Fatty wheel combined with a Rear Hub Bws/Zuma 4/110 – 3x80 Multi Bolt Pattern.
Reference: MF47.02001
Brand: Motoforce
Reference: 90202-10120-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F1685-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1414044
Brand: Malossi
Malossi large pore sports air filter. Great filtering performance in fire-resistant foam.For optimal performance when used on the road, we recommend using air filter oil.
Reference: BT11004
Brand: Scootertuning.ca
The starter clutch creates the link between the starter and the crankshaft. The clutch secures the components if the motor is turned on and the engine revs are more than the starter motor revs. Crunching and knocking when starting often point towards a problem with the clutch. Leaving it could cause major damage to the engine cases. Suitable for all 139...
Reference: NK200.05
Brand: Naraku
Naraku electrical choke for all Chinese-built 4-stroke carburettors on Kymco, Peugeot, Piaggio, Yamaha and MBK. The choke can simply be swapped with the original. Also fits Dellorto and Arreche tuned carbs. Delivery as shown. Diameter choke piston: 7mm
Reference: TRS-AFC99/BK
Brand: TRS
Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly bolts, and give the bike a really awesome look! Caps come raw, anodized red, anodized black or anodized black...
Reference: SCT-PA012
Brand: Scootertuning.ca
Reference: IP22167
Brand: Naraku
Repair/spare part kit for PWK carburettors made by 101 Octane. Suitable for Keihin PWK carbs, as well as OKO, KOSO, NARAKU, Stage6 R/T and many more.
Reference: MF16.RK002
Brand: Motoforce
Motoforce offer here repair kit for PHBG carb.
Reference: 4VP-H3311-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: BM01957
Brand: Scootertuning.ca
Reference: TH15ADIO50-526
Brand: Scootertuning.ca
Stroker crankshaft for AF18 Honda Dio.
Reference: NK900.59
Brand: Naraku
V.2 is the latest version of the CNC-machined pulley from NARAKU. This enhanced version now allows you to mount the original variator fan wheel and carrier star him. (Fig. 2), the edge angle was revised again and combines a little more top speed with sufficient power. The CNC-machined running surface of the disc allows for a clean, low-vibration belt...
Reference: IP32365
Brand: Scootertuning.ca
12V replacement indicator relay / flasher unit. This relay is used in many vehicle brands. It features a 90 ° offset 2-pin connector. For security, please compare your component with that in the image required photo flasher, since year of manufacturer may determine whether a different relay has been used.
Reference: MF99.00072
Brand: Motoforce
Universal flywheel / internal rotor puller for the most common ignitions such as Italkit, Polini, Malossi, MVT, PVL, and HPI. The simple 2-bolt system makes it quite easy to get the rotor off the crankshaft without any damage. Furthermore, this can be used as flywheel puller for some models.
Reference: 451081
Brand: Doppler
High Quality small end bearings from Doppler now available !
Reference: S6-802050
Brand: Stage6
High quality silver small end bearing from Stage6 for many common engines. The best bearings available on the market! The original item should be replaced when using a new crankshaft or tuning cylinder. In addition to the common sizes, we also offer an extra-wide 10mm bearing. With some cylinder kits, the bearing has too much play and may wear unevenly....
Reference: NK200.24
Brand: Scootertuning.ca
E-choke for scooters with Mikuni carbs or Chinese Minarelli-based 2-stroke engines e.g. CPI, Keeway, Generic, Mawi, Longija etc.
Reference: NK430.31
Brand: Scootertuning.ca
Organic compound scooter brake pads, often used as factory-fitted items. Replacement pads that are good value for money. FA083 MCB519 DB2060