No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
100% Synthetic lubricant. Based on...
Reference: 0800-1139.1
Brand: NCY
Attenion! NCY Fat bar stem required! Upgrade your stock handlebars with these taper bars. Great replacement for your Ruckus. Make sure to get the matching handlebar top clamp to utilize these bars. They will not work with the standard clamp.
Reference: RETRO00
Brand: Bcd
The F1 Pro Series is BCD's first mirror line. The very elegant high-quality mirrors are available individually for left and right side. They can be adjusted via a ball joint at the mirror body. The design is rounded off with laser-cut logos at arm, glass and body. Available in black, white and chrome.
Reference: EB002
Brand: Easyboost
The Easyboost Racing Subframe allow you to easily install Minarelli horizontal engine on Bws'r / Zuma (Pre-bug) that have factory Minarelli Vertical engine. The subframe fit over the original fixations of a framework without any welding. Assembly takes less than 10 minutes. Made of galvanized steel (8mm thick) and laser cut ensures optimum quality and...
Reference: EB001
Brand: Easyboost
The Easyboost Racing Subframe allow you to easily install Minarelli horizontal engine on Bws'r / Zuma (Pre-bug) that have factory Minarelli Vertical engine. The subframe fit over the original fixations of a framework without any welding. Assembly takes less than 10 minutes. Made of galvanized steel (8mm thick) and laser cut ensures optimum quality and...
Reference: 0819643B
Brand: Malossi
Replacement parts for Malossi MHR Overrange variator.
Reference: 343.0601
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: MF40.00301
Brand: Motoforce
Sintered brake pads from Motoforce Racing for sporty riding. Ideal for maintaining high braking performance. Sintered metal offers superior thermal properties, minimizing the heat at the brake piston and thus the heat of the brake fluid. Like other pads, these also need to be run in to achieve maximum braking power. For daily use, we recommend organic or...
Reference: S6-5214003
Brand: Stage6
These black-coated torque springs from Stage6 are available in different strengths. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can't feel any acceleration. The strength of a torque spring is marked on the spring itself so you won't have any...
Reference: S6-5914001
Brand: Stage6
The Stage6 Pro drive belt is an inexpensive high quality drive belt produced by Bando in Japan. It has optimised grip characteristics that guarantee excellent power transmission.
Reference: 6614105E
Brand: Malossi
High-speed bearings with increased load capacity, designed and tested for endothermic racing engines. Special high-speed precision bearings, reinforced for increased load and heavy applications, with oversize balls, carbonitrided inner rings, steel and polyamide cages. The co-operation of Malossi technicians with the company SKF allowed to obtain an...
Reference: 97707-60540-00
Brand: Yamaha
Yamaha OEM replacement part. Tapping screw that holds the cylinder and fan cover together.
Reference: 5PJ-F414A-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F1685-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 17145
Brand: Top racing
OEM quality small end bearing (12x17x13mm) by the Portuguese manufacturer Top Racing. Suitable for use in original and slightly tuned engines.
Reference: 6116844
Brand: Malossi
High quality hard wearing belt by Malossi. Sophisticated rubber compound gives best traction.
Reference: 254.0125
Brand: Polini
This is the complete gasket base set for Polini Evolution cylinder kit. Check the picture to see which gaskets are included.
Reference: S4C04760009-10
Brand: Athena
Replacement piston for the Athena Hyper Race kit Minarelli Horizontal / Vertical.
Reference: STR-687.12/CR
Brand: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: S6-79166ET01
Brand: Stage6
Finally we can offer you the cylinder spacer kit that goes with the 85mm Stage6 R/T crankshaft. This makes it possible to use your standard cylinders in conjunction with this crankshaft. For further information about the 85mm conrod crankshaft, check out the crankshaft in the shop.
Reference: IP12478
Brand: Scootertuning.ca
Great price cylinder kit for air-cooled Piaggio engines. The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder head can be ordered...
Reference: 081100/1
Brand: Athena
High performance Mid-race 70cc aluminum cylinder kit made in Italy by Athena. With the thermal advantages of aluminum provides these cylinders with better cooling and a higher peak power than cast-iron cylinder. Performance between 16-19 hp can be reached. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: S6-35001RO
Brand: Stage6
Racing air filters in red, blue and yellow with a low-porosity foam for an optimum filtering effect. These Stage6 air filters are available with a length of 7cm or 20cm and have a fitting diameter of 35mm, which fits for all 12-21mmDellorto and Arreche carburetors. The longer ones cannot be used with all scooter models, but they ensure a better airflow.
Reference: KW33762
Brand: Scootertuning.ca
Unrestricted 18mm carburettor for all 2-stroke scooters with Minarelli & chinese Minarelli clone 1E40QMB engines (Minarelli replica air-cooled) Comes with electric choke. Requires a single throttle cable.
Reference: 93210-108B1-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 90179-10609-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 3KJ-27481-00
Brand: Scootertuning.ca
Reference: TH18ADIO50-48
Brand: Scootertuning.ca
Replacement Gasket set for 48mm AF16-AF18 Cylinder kit.
Reference: KW15440
Brand: Scootertuning.ca
Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke engines like CPI, Keeway, Generic, Mawi, Longija etc. with 16mm crank tail shaft. Delivery is as shown. If the starter clutch is damaged, it always makes sense to replace all of the components. In a starter clutch...
Reference: IP15542
Brand: Scootertuning.ca
Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.
Reference: BT14247
Brand: Scootertuning.ca
Dowel pin set for 50cc GY6 engines Delivery contains: 6x dowel pins for M7 (cylinder, cylinder head) 6x dowel pins for M6 (engine cases, crankcase cover), 1x dowel pin M8 (gearbox cover).
Reference: 1200-1027.10
Brand: NCY
Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1500 rpm compression spring is specifically for the GY6. Measurements: Wire Diameter: 4.2mm /...
Reference: 6614705.A0
Brand: Malossi
For optimum engine setting, Vario weights should be used. The high quality finish of the Malossi roller weights result a high stability and a self-lubricating effect. They are available in different weight selection. The set consists of 6 or 8 rolls, depending on the model.