No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: 061038001
Brand: Tecnigas
With the RS II, Tecnigas offers an evolution of the RS, the first racing system to come with homologation. The RS II has been slightly modified and technically enhanced; works well especially when combined with 70cc sport cylinder kits.
Reference: 98517-05020-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: S410000350017
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: IP32327
Brand: Scootertuning.ca
Replacement rectifier regulator as shown in image. The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out. 02601800 / 00168780 / 31600-KS4-770 / 02601800 / 31600-M56-000 /...
Reference: RH-01
Brand: Ruckhouse
Reference: TRS-DBA9912/BK
Brand: TRS
Looking to run RRGS, Adelin, ScooterTuning or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061 aircraft aluminum and anodized in black or raw finish.
Reference: SCT-GC100
Brand: Scootertuning.ca
Don't know what to get for your loved ones? Our gift card is the ideal choice to let your loved one choose from a selection of more than 3000 products! Once you order the gift card, we will email you within 24 hours a printable gift certificate that you can fill in.
Reference: P-PL005
Brand: Polini
Complete engine package for PGO and Genuine Scooter. Package include Polini Sport 70cc cylinder kit, Variator Polini Hi-Speed, Exhaust Polini Speed, Main jet set Stage6 82-100 4mm, BR9ES Spark plug.
Reference: WB-5038
Brand: Buzzetti
This Buzzetti tool allows you to separate the crankcases, without having to resort to a hammer and thus without damage to crankshaft or cases. All you have to do is place the tool onto the end of the crankshaft and screw it against the block. Please make sure to remove the crankcase bolts beforehand!
Reference: MF33.00010
Brand: Motoforce
Replacement small-end bearing from Motoforce. It can be used not only in Motoforce crankshafts, but is also ideal for original crankshafts.
Reference: KO-BO001000
Brand: Koso
Temperatur sensor cable for Stage6 and Koso termometer. Size : 1meter
Reference: S6-2016602S
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: S6-56ET006
Brand: Stage6
Replacement parts for Stage6 R/T variator.
Reference: 203.0112
Brand: Polini
We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: 203.0111
Brand: Polini
We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.
Reference: DIO90-030300
Brand: Taida
Taida High Quality stroker crankshaft for AF16 Honda Dio. This stroker crankshaft allow to go up to 120cc with Taida 54-56mm Cylinder kit. Attention! Boring required.
Reference: BT11002
Brand: Scootertuning.ca
Starter motor, suitable for all Chinese-built 4-stroke engines. This item can be used without a problem, even where the originally fitted item has an additional green earth cable.
Reference: BT80011
Brand: Scootertuning.ca
Oil strainer bolt for GY6 50ccm 139QMB/QMA and 125/150ccm 152/157QMI 4-stroke engines.
Reference: SCT-GC50
Brand: Scootertuning.ca
Don't know what to get for your loved ones? Our gift card is the ideal choice to let your loved one choose from a selection of more than 3000 products! Once you order the gift card, we will email you within 24 hours a printable gift certificate that you can fill in.
Reference: 0800-1031.4
Brand: NCY
Stiffen up your chassis with the NCY Honda Ruckus/Zoomer Footrest Brace kit. This kit includes folding foot pegs for a more comfortable ride. Available in White, Black and Chrome.
Reference: 201.0171
Brand: Polini
Polini carburetors are lodged a flat slide lightweight chrome alloy, highly resistant to abrasion and wear, which improves slip. Polini carburetors allow more efficient to have every rpm benefits. Providing better acceleration and recovery, also improving the extension at maximum speed and optimizing the power output. They provide a simple adjustment with...
Reference: MXS31446476
Brand: MXS Racing
Cylinder, piston, cylinder head Maxiscoot "MXS Sport" 70cc (competition department Maxiscoot). This cylinder has 5 exhaust port transfers "Oval", it is made of aluminum treated "Nikasil" and is provided with a piston mono-segment axis of 10mm high quality. High compression cylinder head specific (diagrams: 189.4 ° / 123.6 ° / 125.8 °). To fully exploit...
Reference: NK390.20
Brand: Naraku
Naraku racing CDI for all CPI, Keeway, Longjia, Generic and Minarelli-based Chinese-built engines with a double connector. Simply swap for the original unit. Attention: Can be used with 6-pin connector, but not if the existing CDI unit has its own wiring loom with no connectors.
Reference: TOM500.03
Brand: Scootertuning.ca
Using a so-called quick action throttle or simply quick throttle reduces the angle of rotation of the throttle, this way the throttle travel is shortened. This is particularly useful when converting to a larger carburetor with a larger passage and thus longer opening travel of the throttle slide, as the long travel is simply annoying in the long run, and...
Reference: MF83.107
Brand: Motoforce
The design with orange cooling fins does look great, but what's more important is that the open design with many cut-outs and the additional shrunk-on cooling fins lead to optimal heat dissipation and better cooling. The cooling fin rim also reinforces the bell, preventing deformations which can cause the clutch to grip unevenly.
Reference: 1CD-F3191-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: VC30920
Brand: Scootertuning.ca
PLEASE CHECK YOUR OEM BELT DIMENSION BEFORE ORDERING! High-quality Mitsuboshi drive belt for high performance engines and compact drive systems. Reinforced side walls for better power transfer, and the materials make it more oil-resistant and less sensitive to heat build-up. Dimensions: 772*16.5
Reference: 005-24501-HU
Brand: Two Brothers Racing
Super light weight 3.75” round CF muffler. 2.25” perforated inner core deliverers maximum air flow and deep aggressive tone. Blacked out clamp. 1 year manufacturer warranty. TBR sound reducer included!
Reference: GY6-01054-61w
Brand: Taida
High Quality 171cc Taida Cylinder kit for GY6 125/150cc + engines. The bore is 61mm. Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads and buggies). No Boring Required !
Reference: BM01520
Brand: Scootertuning.ca
Remplacement rear brake cable for PGO and Genuine Scooter.
Reference: FLP-008
Brand: FLP
Reference: D1132/AL
Brand: Adelin
We can offer here complete CNC brake master cylinder and cable lever unit for scooter with front disc brake and rear drum brake. Great part with Stage6 throttle & switch!