No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
With the RS II, Tecnigas offers an...
Reference: 209.0411
Brand: Polini
This is the complete gasket set for Polini evolution 70cc cylinders. Check the picture to see which gaskets are included.
Reference: SCRUCK
Brand: Scootertuning.ca
Our most popular scooter cover will protect your stretched or lowered scooter from the elements. Super high-quality, water-resistant cover comes with a handy carrying pouch. Includes a soft liner to protect expensive custom paint jobs. Includes heat protective liner for hot vertical exhausts. Built in bungee straps for keeping cover tight on your bike....
Reference: S6-ET1401BB
Brand: Stage6
Replacement Brake pad for Stage6 R/T 4 Piston Caliper.
Reference: 19007
Brand: Scootertuning.ca
Complete alternator stator for carburetted Piaggio engines from 1999 onwards. Stator supplied ready to install.
Reference: VCR-RD08.KILL
Brand: Voca
The VOCA Killswitch consists of a fix and a detachable part. The fix part has to be fitted to the handlebar. The detachable part consists of a flexible lanyard with an magnetic ending that has to go around the drivers wrist. In case that the magnetic end of the lanyard is connected to the base of the killwitch the bike is ready to go. But once the lanyard...
Reference: MXS905
Brand: MXS Racing
With the MXS magnet kill switch, we can offer you a state-of-the-art product as it is used in motorsport. Nevertheless, it can also come in handy if you only use your scooter to commute from A to B, as it can be used like a small but effective immobiliser: it prevents the engine from being started when the ignition lock has been short-circuited.
Reference: KO-BB026001
Brand: Koso
Fully-fledged universal speedo with state-of-the-art technology, homologated for ATVs, motorbikes and scooters. With selection of km/h or mph and new tyre circumference adjustment (adjustable 1000–2500mm). With the optionally available brackets, it can easily be mounted to practically all models.
Reference: S6-0571/BK
Brand: Stage6
Stage6 now offer banner with their logo on it! Excellent for give your garage racing style!
Reference: 2315825B
Brand: Malossi
Replacement parts for Malossi MHR Overrange variator.
Reference: MXS-012
Brand: MXS Racing
This intake kit is designed to combine with the MXS GP cylinder. You can of course also associate it with Hyper Racing type configurations above 70cc. The valve box used is none other than the VForce 3 from Moto Tassinari. The pack is complete and includes the intake, the shim, the valve box, the gaskets, screws and collar.
Reference: 93450-10823-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: TRS-LIR002
Brand: TRS
Our Flasher works on Honda Grom and used on Both ATR and DAn Max GY6 Harness. This fixes no flash or hyperflash. Plugs in directly. We need to turn dial to get desired flash rate. Elimates the need for tapping wires to install load resistors. This is NOT for OEM Honda Ruckus must use Resistor or our Relay in related items below.
Reference: 0300-0105.20
Brand: NCY
We can offer here the NCY tank cover made in ABS thermoplast. Great part in conjuction with a NCY or custom footrest frame. Available in White, Black, Carbon and Chrome!
Reference: D1132/AL
Brand: Adelin
We can offer here complete CNC brake master cylinder and cable lever unit for scooter with front disc brake and rear drum brake. Great part with Stage6 throttle & switch!
Reference: 24208
Brand: Scootertuning.ca
Brake calliper for front wheel disc brakes on Gilera Runner, MBK Nitro, as well as Yamaha Aerox scooters. Check product image, as the pictured calliper is the one supplied. Suitable for AJP braking systems.
Reference: 3XG-F1481-00-00
Brand: Yamaha
Yamaha OEM replacement part. Shaft that goes in the Engine mount Spacer to tighten it inside the subframe.
Reference: S6-35001BL
Brand: Stage6
Racing air filters in red, blue and yellow with a low-porosity foam for an optimum filtering effect. These Stage6 air filters are available with a length of 7cm or 20cm and have a fitting diameter of 35mm, which fits for all 12-21mmDellorto and Arreche carburetors. The longer ones cannot be used with all scooter models, but they ensure a better airflow.
Reference: 173.0017
Brand: Polini
Polini especially designed CNC Boost Bottle made for 70-100cc engines. Like the Doppler version, it has a solid chamber, which prevents the airstream from oscillating back and forth through the carb's venturi when throttle is lowered, hence the airstream is only charged with fuel once which improves pick-up when throttle is opened. This way your scooter...
Reference: 213.0524
Brand: Polini
Reference: 1CD-XF711-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: K-DC-DW1L
Brand: Dirt-Care
DIRT WASH High Performance Cleaner is specifically designed to be applied to all surfaces and components of an off-road vehicle. This non-corrosive cleaner will remove the toughest soil residues while protecting your investment. Keep your vehicle sparkling with DIRT WASH from Dirt-Care.
Reference: NK100.18
Brand: Naraku
13mm gudgeon pin cirlips from Naraku. Ensure the clip groove is clean and will allow the circlip to seat properly. When installing, we recommend opening the circlip against the travel of the piston. G-clip design Delivery contains: 2x circlips
Reference: SCT-1281244
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Screws are NOT included!
Reference: TRS-CR9022/AL
Brand: TRS
Clear coolant resevoir tank for honda ruckus zoomer or metropolitan. comes in raw or black anodized. cnc'd aluminium caps; stainless mounting bracket; this product will not fit with the stock pcv location; chrome hose nipple; transparent; very easy to mount.
Reference: S6-P010
Brand: Stage6
Complete engine package for Yamaha Bws 2002-2011. Package include Cylinder kit Stage6 Streerace 70cc, Variator stage6 sport pro, Exhaust Tecnigas Silent Pro, Main jet set Stage6 80-102 6mm, Spark plug BR9HS, Stage6 16x13 roller 5g and Stage6 medium torque spring.
Reference: STR-659.22/BK
Brand: Str8
The universal LED rear light with indicator function is the ideal supplement for all conversions that rule out the usage of the stock rear light. Available in white and in the Black Line Edition with tinted lens. WARNING EXTREMELY small tail light!
Reference: KO-BO001001
Brand: Koso
Temperatur sensor cable for Stage6 and Koso termometer. Size : 1meter
Reference: 197204B
Brand: Malossi
Reference: 679966
Brand: Malossi
Malossi S.p.A. is pleased to offer its new series of final transmission gears. These new gears were created by exploiting our 20-year experience in designing and building gears. The new H.t.q. gears were designed and built with straight teeth to minimise losses through friction and stress on the supports. Moreover, our gears increase ratios slightly...
Reference: 482766
Brand: Doppler
Spare springs for Doppler clutch SX86
Reference: KW13980
Brand: Scootertuning.ca
Fan cover for CPI, Generic, Keeway, Mawi, Longija right-hand side fans and air-cooled Minarelli engines.
Reference: TRS-GY6CVTC/MA
Brand: TRS
Get rid on that ugly cast and bulky CVT cover. Our CVT includes a .13" THICK Stainless Steel 'backing plate' to help prevent case cracking along with covering the ugly insides of the stock swingarm, a billet machined decorative front plate, and billet aluminum machined standoffs that hold the decorative plate out from the swingarm for that custom look....
Reference: MXS31446476
Brand: MXS Racing
Cylinder, piston, cylinder head Maxiscoot "MXS Sport" 70cc (competition department Maxiscoot). This cylinder has 5 exhaust port transfers "Oval", it is made of aluminum treated "Nikasil" and is provided with a piston mono-segment axis of 10mm high quality. High compression cylinder head specific (diagrams: 189.4 ° / 123.6 ° / 125.8 °). To fully exploit...