No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Malossi offer here great performance...
Reference: UN059843
Brand: Scootertuning.ca
Reference: IP34883
Brand: Scootertuning.ca
Value replacement crankshaft for scooters with vertical Minarelli engines. Shipped with small end bearing included.
Reference: 4517008
Brand: Malossi
Malossi Mudguard for the C-one and RC-One engine.
Reference: S6-35036/BK
Brand: Stage6
The popular Stage6 Double Layer racing air filter is now available in a new version with 70mm union diameter for all PWK and VHST carburettors with Stage6 MKII bell mouth.
Reference: 343.0600
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: S6-31RT-PWK26
Brand: Stage6
The R/T PWK carburetor is a new development from KOSO, produced exclusively for Stage6. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. The outside measurements and the size of the connection to the intake manifold have been reduced so that mounting is easier. Furthermore, the black racing finish...
Reference: TUB911CK
Brand: Yasuni
Yasuni's Carrera range consists of powerful exhausts in the high end section. The current top model is the Carrera 30, or C30 for short. The silencer comes in the well-known Kevlar or carbon design and expansion chamber and silencer mounting have only been changed slightly in comparison with the former C21. The manifold is welded together of many pieces....
Reference: M4T93-H2
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks and outstanding value for money. The silencer is equipped with a...
Reference: GY6-BEAR-C
Brand: Taida
Taida gearbox bearing set for 125 and 150cc GY6 engines (152/157QMI).
Reference: BM01520
Brand: Scootertuning.ca
Remplacement rear brake cable for PGO and Genuine Scooter.
Reference: TH12ADIO50-48
Brand: Scootertuning.ca
Reference: DIO-01050-A
Brand: Taida
Taida Honda Dio 50mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with the dio standard stroke crankshaft (41.4mm).
Reference: 209.0469
Brand: Polini
Replacement Gasket for the 79cc 4V Polini cylinder kit.
Reference: 0609503
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segments. The silencer mounting has been changed and the exhaust now comes with a black rear silencer.
Reference: KW16658
Brand: Scootertuning.ca
Complete OEM-quality alternator for Minarelli-based 2-stroke engines, suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 versions in use. This is the 3 pin main connector, and 3 single cables. Delivery includes base plate. Rotor must be ordered separately.
Reference: S6-72166ET08
Brand: Stage6
This is the complete gasket set for 70cc Stage6 Streetrace cylinder kit. Check the picture to see which gaskets are included.
Reference: 6115781
Brand: Malossi
Malossi’s overrange kit has been completely revised and now goes under the name of “La Furia Rossa”. The rear pulleys are completely made out of aluminium, minimising weight and also giving a more instant response. They now come with holes for better cooling, and the exterior faces are anodised red. The contact surfaces of the Multivar variator have been...
Reference: TUB423
Brand: Yasuni
This is the kid brother of the Carrera 20 exhaust, which comes with a slightly smaller expansion chamber and higher resonance length. It is manufactured by the Spanish guys from Yasuni and has many strong points such as a high quality finish and attractive details like a reinforced tailpipe, a silencer that is stabilized via a spring and equipped with an...
Reference: 01131246
Brand: Airsal
With the Airsal 70cc, you get an aluminium cylinder for the same price that would normally buy you a common cast-iron cylinder. It has a hardened chrome-nikasil bore, and due to the fact that it is made of aluminium it has better heat dissipation properties than the cast-iron version so that piston seizures are a lot less common. Unfortunately, high top...
Reference: 238272B
Brand: Malossi
Set of 3 pins for Malossi torque corrector.
Reference: 0413434
Brand: Malossi
With the E15, Malossi has designed the first big and open air filter; unfortunately with only one layer. Connection sizes are 42, 50 and 58.5mm, to achieve these sizes, two funnel-shaped adaptors are included.
Reference: 66161
Brand: Piaggio
Original Piaggio oil pump drive belt. Suitable for Piaggio, Gilera and other scooters with Piaggio engines (e.g. some Aprilia and Derbi scooters).
Reference: NK900.55
Brand: Naraku
NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...
Reference: FLP-020
Brand: FLP
Maybe your ruckus is sitting low and you need some ground clearance or maybe you want to raise your gas tank and add some leds around it. This kit will raise your tank .750 – 3/4”. Includes : 4 M6 CNC dress up washers, 4 M6 x45 stainless bolts, 4 CNC stand off spacers and 4 lock nuts
Reference: TRS-MFB/SH
Brand: TRS
Looking to upgrade your stock frame bolts, we can offer here the correct thread and pitch for the honda Ruckus Frame. Grade 12.9 steel zinc plated for corrossion resistance. Include stainless steel washers.
Reference: S6-7219560
Brand: Stage6
With the 70cc e grey cast iron cylinder series, Stage6 offers a more economical alternative to the popular SportPro Aluminium cylinder. The transfer port layout has been adopted from the high-performing 70cc SportPro, but slightly modified in order to fulfil the thermal demands of the cast iron cylinder. Stage6 has gone for a piston manufactured by the...
Reference: 209.0411
Brand: Polini
This is the complete gasket set for Polini evolution 70cc cylinders. Check the picture to see which gaskets are included.
Reference: 060938411
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segements. The mounting of the silencer was changed and it now comes with a black rear silencer.
Reference: SCRUCK
Brand: Scootertuning.ca
Our most popular scooter cover will protect your stretched or lowered scooter from the elements. Super high-quality, water-resistant cover comes with a handy carrying pouch. Includes a soft liner to protect expensive custom paint jobs. Includes heat protective liner for hot vertical exhausts. Built in bungee straps for keeping cover tight on your bike....
Reference: 441278
Brand: Doppler
Latest addition to Doppler's range of crankshafts. Excellent quality with really strong INA bearings. These crankshafts may be used in engines revving up to 15,000 Rpm, excellent value for money.
Reference: S6-ET1401BB
Brand: Stage6
Replacement Brake pad for Stage6 R/T 4 Piston Caliper.
Reference: 19007
Brand: Scootertuning.ca
Complete alternator stator for carburetted Piaggio engines from 1999 onwards. Stator supplied ready to install.
Reference: VCR-RD08.KILL
Brand: Voca
The VOCA Killswitch consists of a fix and a detachable part. The fix part has to be fitted to the handlebar. The detachable part consists of a flexible lanyard with an magnetic ending that has to go around the drivers wrist. In case that the magnetic end of the lanyard is connected to the base of the killwitch the bike is ready to go. But once the lanyard...
Reference: KO-BB026001
Brand: Koso
Fully-fledged universal speedo with state-of-the-art technology, homologated for ATVs, motorbikes and scooters. With selection of km/h or mph and new tyre circumference adjustment (adjustable 1000–2500mm). With the optionally available brackets, it can easily be mounted to practically all models.
Reference: S6-0571/BK
Brand: Stage6
Stage6 now offer banner with their logo on it! Excellent for give your garage racing style!
Reference: RAD-28*13
Brand: Taida
0