No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Malossi offer here great performance...
Reference: 3111374
Brand: Malossi
Malossi Sport 124 is a high torque cast iron cylinder kit with robust piston and 2x rings. Easy to tune, great for beginner tuners. The cylinder kit comes with all the necessary small parts, instructions etc. Our Tip: Original carburettor can be retained, however jetting needs to be adapted.
Reference: VC19049
Brand: Scootertuning.ca
Organic compound scooter brake pads, often used as factory-fitted items. Replacement pads that are good value for money. FA305 MCB712 DB2023
Reference: BT24017
Brand: Scootertuning.ca
Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. Suitable for all 4-stroke low-cost Chinese-built scooters. Please check the length of the original item. This cable is 190cm in length.
Reference: MOT103258
Brand: Motul
Dry cleaner and protective wax. Cleans and shines without rinsing. Leaves a long lasting protective nish on motorcycle.
Reference: BT29484
Brand: Scootertuning.ca
Starter motor bendix gear bush. Dimensions: Inside Diameter 8mm. Outside Diamter 12mm. Width 8mm
Reference: GY16363
Brand: Scootertuning.ca
Replacement gasket set for GY6 125-150cc Cylinder head cover.
Reference: 0800-1097.6
Brand: NCY
Now available in black, the NCY scooter steering stem/triple tree will add some stability, flash, and amazing quality to match your NCY front end disc conversion. NOTE: Metropolitan requires mild modification to the fender.
Reference: SCT-H053-001
Brand: Scootertuning.ca
We offer here inexpesive replacement coil for Honda and GY6 engine.
Reference: TRS-AFC99/AL
Brand: TRS
Looking for some nice, new frame caps for your Honda Ruckus? Check these frame caps out! These caps are CNC machined from 6061 Billet Aluminum, and are held in place by a snug fitting o-ring in the side of your frame. They cover up the unsightly bolts, and give the bike a really awesome look! Caps come raw, anodized red, anodized black or anodized black...
Reference: TRS-KB001/BK
Brand: TRS
TRS key head is made with 6061 aluminum and cnc right here in merica. Nice little addition to your honda ruckus or met. Note: you must grind off top of key to fit inside slot. Has set screws. Comes only in black contrast cut.
Reference: 3513658
Brand: Malossi
Replacement Piston rings set for Malossi I-Tech 70cc 4 stroke cylinder kit.
Reference: 111CT
Brand: SBS
Reference: 174.0020
Brand: Polini
Polini brake pads stand for high-quality processing & top performance. At the racetrack as well as on the road, reliable & durable braking performance is a must. The organic coating wear evenly and protects the brake disc. This Polini brake pad features a KBA certificate (German road legal approval) and can be used legally as a high-quality...
Reference: M-P0120/B
Brand: Malossi
Complete engine package for Yamaha Bws 2002-2011. Package include Malossi Sport 70cc cylinder kit, Variator Malossi multivar, Exhaust Yasuni Z, Main jet set 80-102 6mm, Spark plug BR9HS, Malossi 16x13 7.0g roller and Malossi white torque spring (Soft).
Reference: 357259
Brand: Malossi
Reference: GY14631
Brand: Scootertuning.ca
Indicator relays for 125/150cc GY6 4-stroke Chinese-built scooters. 3-pin plug.
Reference: 482369
Brand: Teknix
Bargain replacement variator from Teknix, comes with one set of roller weights. Characteristics are like those of the original part, so this makes a good replacement without performance increase.
Reference: KO-BG016B00
Brand: Koso
This Koso Temperature Sensor + Adapter for all radiator hoses with diameters between 14mm and 26mm comes in handy in case the thread of your thermometer does not fit. It can be used with Stage6 multimeters or Koso thermometers / multimeters (old models with black connection). The T-shaped adapter is placed between the radiator hose. It comes with a...
Reference: 90201-14740-00
Brand: Yamaha
Yamaha OEM replacement part. Flat washer to place behind the rear wheel self-locking nut.
Reference: MF35.16807
Brand: Motoforce
Bargain Racing reed valve with increased intake diameter and glassfibre reeds. Contrary to the original reeds, these here are rubber vulcanized, which makes sure that they close tightly. Performance at a fair price!
Reference: RH-159
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Screws are NOT included!
Reference: 1000-1080.1
Brand: NCY
Silver finish NCY front forks. Heavy duty-high performance front end for your Honda Ruckus or Zoomer. Refined look! These work with the stock drum-brake front wheels. Dimensions: Stantions: 27mm Thick / Axle I.D.: 10mm / Fork Length: 360mm (top to axle center). Fits pre-2012 Honda Metropolitan scooters as well. Installs on the stock steering column clamp,...
Reference: TRS-AS423/AL
Brand: TRS
We were tired of waiting for these to come in stock so we made our own. Fits all 12mm axles.. Made from 6061 Billet Aluminum right here in the USA. Comes in Raw and Anodized Black.
Reference: 0608503
Brand: Tecnigas
The Q-TRE from Tecnigas is a bargain exhaust system and replaces the TEK. Tecnigas says, it gives “high performances for low budgets”, which hits it on the nail. The Q-TRE is a good choice for original 50cc engines. With homologation for most models.
Reference: TRT-90EA
Brand: 2Fast
The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System.
Reference: GY15040
Brand: Scootertuning.ca
Alternator stator for GY6 125/150cc machines. There are many variations of this alternator of these engines. They can however be quite easy to identify. There are stators with 6, 8 or 11 coils. Please check which of these you have. The connector cable plug has 3 pins and has 2 additional connector cables with this 8 coil type alternator.
Reference: S6-ET1402BB
Brand: Stage6
Replacement Brake pad for Stage6 R/T 4 Piston Caliper.
Reference: S6-5155015
Brand: Stage6
Setting up variator and clutch are of prior importance for optimal shifting characteristics and for a fast engine. In order to match the variator to the drive belt width and thus obtain excellent acceleration, you will need these washers. They will be placed between the fixed front pulley and the bushing, this way adjusting the distance between variator...
Reference: S6-4031
Brand: Stage6
Stage6 is rolling out a revised and improved version of their popular mini tachometer / rev counter. The MKII is the ultimate must-have for setting up engine and variator. This compact and easy-to-read digital tachometer with blue illuminated display gives extremely precise engine speed info within a tolerance range of only 10rpm and will be the perfect...
Reference: VCR-MD0250
Brand: Voca
Individual stickers with the well-known Voca logo, available in different sizes.
Reference: MF96.90000
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: 482766
Brand: Doppler
Spare springs for Doppler clutch SX86
Reference: 5PJ-H3330-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 83520-GAH-000
Brand: Scootertuning.ca
Reference: 83620-GAH-000
Brand: Scootertuning.ca