No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
Replacement gasket set for the Roost...
Reference: S6-31RT-PWK32
Brand: Stage6
The R/T PWK Carburetor is a new development from KOSO, produced exclusively for Stage6. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. The outside measurements and the size of the connection to the intake manifold have been reduced so that mounting is easier. Furthermore, the black racing finish...
Reference: 1VC-F1552-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1000-1110.1
Brand: NCY
Electroplated front wheel axle by NCY for Yamaha Zuma 125 scooters. Has safety wire / cotter pin provisions (2mm)! Dimensions: Diameter 12mm, Length 11in / 279mm
Reference: Dio-agas-0.5-58.5
Brand: Taida
Replacement Taida Cylinder base gasket 0.5mm
Reference: NK120.12
Brand: Naraku
Cylinder gasket set for all 39mm Naraku cylinder sets for Kymco, SYM and Honda Dio engines with upright cylinders. Also suitable for the original cylinder or 50cc cylinder sets from other manufacturers.
Reference: MOT111820
Brand: Motul
Creamy and non-sticky lubricant for all chains of off road bikes and quads. Disperses deposits of sand, mud and dirt. Protects the chain in muddy and wet conditions.
Reference: GY6-pm002
Brand: Taida
Taida High torque starter motor for GY6 50cc engine.
Reference: NK301.01
Brand: Naraku
Chrome flywheel fan cover for the 139QMA/QMB 50cc 4 stroke engines. This product is a nice upgrade or replacement for any broken cover.
Reference: NK900.81
Brand: Naraku
NARAKU sports variator for GY6 and 50cc Kymco 4-stroke engines. When calibrated, this variator provides good acceleration at higher speeds. The set comes with 6g Variator weights 16x13mm. These weights are suitable for scooters in original condition. If tuning components (e.g. exhaust system or counter pressure spring) are installed, we recommend that you...
Reference: GY6-BUSH
Brand: Taida
taida gearbox bushing set for 125 and 150cc gy6 engine (152/157QMI).
Reference: FLP-017
Brand: FLP
So you are ready to add new wheels to your ruckus BUT you don’t want to fork out 1000.00 dollars to get a full disk brake set up. This is where our Front Drum Hub comes in. BOLT ON 12 x 4 4X90 or 5x90 wheels. 100 percent bolt on. Speedometer still works. Wheel bolts included. Use you factory wheel spacer. THINGS TO KEEP IN MIND : These only work with the...
Reference: RH-197
Brand: Ruckhouse
Our CVT includes a .13″ THICK Stainless Steel ‘backing plate’ to help prevent case cracking along with covering the ugly insides of the stock swing arm, a billet machined decorative front plate, and billet aluminum machined standoffs that hold the decorative plate out from the swing arm for that custom look. The plates come RAW, ready for you to paint,...
Reference: TH46ADIO50-TD002-BL
Brand: Scootertuning.ca
Reference: 244.0574
Brand: Polini
With the Evolution3, Polini has developed a completely new transmission series. Torque driver as well as outer half of the variator are nearly entirely made of aluminium, which makes them a lot lighter than their predecessors. Furthermore, Polini offers a version with ceramic coating that is intended to offer longer-lasting surface roughness and therefore...
Reference: TRT-70EA
Brand: 2Fast
The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System.
Reference: 209.0226
Brand: Polini
This is the complete gasket set for 70cc Polini Sport/Corsa cylinder kit. Check the picture to see which gaskets are included.
Reference: BT10006
Brand: Scootertuning.ca
Alternator with cable connector/plug and Pick-up sensor. These alternators are currently available in 2 different versions. The difference is the insulated coils; Version 1 has 2 insulated coils. The difference is more accurately shown in the 2nd product image. The main connector can has 2 or 3 pins on this version. Image shown is Version 1.
Reference: MF99.00107
Brand: Motoforce
We can also offer T-handle socket wrenches in different sizes from Motoforce. These parts are essential for every workshop. Thanks to the large handle, even stubborn bolts can easily be loosened.
Reference: RH-049
Brand: Scootertuning.ca
Reference: NK901.10
Brand: Naraku
NARAKU high-quality belts. High grip combined with good flex minimise friction losses and transmit the engines power to the road. One of the best belts in the range. Size: 788-17-28
Reference: S6-0610
Brand: Stage6
Camping Chair Stage6 type Paddock, foldable camping chair for race track, paddock, campground or barbecuing. The chair is comfortable, has two armrests and - very important! - an integrated drink holder on one side. When folded, the chair does not take up much space and can be taken anywhere. The Stage6 folding camping chair goes great with the 3x3m...
Reference: A366410
Brand: Tun'R
Reference: SCT-GCB0211
Brand: Scootertuning.ca
Replacement gearbox cover for Yamaha Bws/Zuma 2T 2002-2011.
Reference: 3GF-F5852-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: VC33895
Brand: Scootertuning.ca
Replacement brake pads for Kymco Scooter.
Reference: 558176
Brand: Malossi
The continuous development of electronics in the automotive segment led Malossi to the creation and marketing of a complete line of electronic coils for scooters to be used on the street and for races which is at the highest level of technology. Each electronic coil model was expressly studied for the scooter it will be fitted on, and this is the reason...
Reference: DIO-01050-B
Brand: Taida
Taida Honda Dio 50mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with dio taida stroker crankshaft 49.6mm (97cc).
Reference: 6713339
Brand: Malossi
Malossi S.p.A. is pleased to offer its new series of final transmission gears for scooters and maxi scooters. These new gears were created by exploiting our 20-year experience in designing and building gears for competition and road scooters. The new H.t.q. gears were designed and built with straight teeth to minimise losses through friction and stress on...
Reference: 125.0008
Brand: Polini
70cc cast-iron cylinder kit from Polini for Kymco scooters with horizontal motor (SF10).
Reference: 206.0201
Brand: Polini
Reference: STR-659.22/CE
Brand: Str8
The universal LED rear light with indicator function is the ideal supplement for all conversions that rule out the usage of the stock rear light. Available in white and in the Black Line Edition with tinted lens. Warning! EXTREMELY small tail light!
Reference: 243.101
Brand: Polini
This Polini compression spring increases the force by 8% over the original and is as a result ideal for tuning applications. The compression spring has the task of pressing the rear shifter pulley against the belt, so dictating how the Variator shifts. Replacement of the compression spring for a stronger one is therefore necessary if the power of the...
Reference: 93210-64893-00
Brand: Yamaha
Yamaha OEM replacement part. This is the O-ring that goes between the air fan and the alternator stator. We noticed that they are most of the time dry and cracked, this is why we decided to offer this as a replacement part.
Reference: 1000-1372.6
Brand: NCY
These forks make a great upgrade to the clapped out stock tubes you’ve been running. Enjoy the smooth ride, improved handling and some fresh, delicious chrome! They have a 26mm tube and work with 10 mm axles and front disc brakes. They fit Zuma 50F, Eton Beamer and CSC go, among others.