No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
Reference: MOT100951
Brand: Motul
Long Life 100% synthetic fluid • All types of hydraulic actuated-brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations • Fluidity specially designed for anti-locking brake system (ABS) • Dry Boiling Point: 270°C (518°F) • Wet Boiling Point: 185°C (365°F) • Standards: FMVSS 116 DOT 5.1 non silicone base &...
Reference: BT29484
Brand: Scootertuning.ca
Starter motor bendix gear bush. Dimensions: Inside Diameter 8mm. Outside Diamter 12mm. Width 8mm
Reference: 5115209
Brand: Malossi
The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package are a torque spring and a set of weights. CAD-designed roller area to give very good acceleration and a wider range.
Reference: 1000-1080.1
Brand: NCY
Silver finish NCY front forks. Heavy duty-high performance front end for your Honda Ruckus or Zoomer. Refined look! These work with the stock drum-brake front wheels. Dimensions: Stantions: 27mm Thick / Axle I.D.: 10mm / Fork Length: 360mm (top to axle center). Fits pre-2012 Honda Metropolitan scooters as well. Installs on the stock steering column clamp,...
Reference: 0800-1097.6
Brand: NCY
Now available in black, the NCY scooter steering stem/triple tree will add some stability, flash, and amazing quality to match your NCY front end disc conversion. NOTE: Metropolitan requires mild modification to the fender.
Reference: 3513658
Brand: Malossi
Replacement Piston rings set for Malossi I-Tech 70cc 4 stroke cylinder kit.
Reference: 174.0020
Brand: Polini
Polini brake pads stand for high-quality processing & top performance. At the racetrack as well as on the road, reliable & durable braking performance is a must. The organic coating wear evenly and protects the brake disc. This Polini brake pad features a KBA certificate (German road legal approval) and can be used legally as a high-quality...
Reference: 0608503
Brand: Tecnigas
The Q-TRE from Tecnigas is a bargain exhaust system and replaces the TEK. Tecnigas says, it gives “high performances for low budgets”, which hits it on the nail. The Q-TRE is a good choice for original 50cc engines. With homologation for most models.
Reference: 021606476
Brand: Airsal
With the Airsal 70cc, you get an aluminium cylinder for the same price that would normally buy you a common cast-iron cylinder. It has a hardened chrome-nikasil bore, and due to the fact that it is made of aluminium it has better heat dissipation properties than the cast-iron version and piston seizures are a lot less common. Unfortunately, high top...
Reference: GY14631
Brand: Scootertuning.ca
Indicator relays for 125/150cc GY6 4-stroke Chinese-built scooters. 3-pin plug.
Reference: S6-4031
Brand: Stage6
Stage6 is rolling out a revised and improved version of their popular mini tachometer / rev counter. The MKII is the ultimate must-have for setting up engine and variator. This compact and easy-to-read digital tachometer with blue illuminated display gives extremely precise engine speed info within a tolerance range of only 10rpm and will be the perfect...
Reference: A366409
Brand: Scootertuning.ca
Reference: MF35.16807
Brand: Motoforce
Bargain Racing reed valve with increased intake diameter and glassfibre reeds. Contrary to the original reeds, these here are rubber vulcanized, which makes sure that they close tightly. Performance at a fair price!
Reference: 1000-1372.6
Brand: NCY
These forks make a great upgrade to the clapped out stock tubes you’ve been running. Enjoy the smooth ride, improved handling and some fresh, delicious chrome! They have a 26mm tube and work with 10 mm axles and front disc brakes. They fit Zuma 50F, Eton Beamer and CSC go, among others.
Reference: DEL-9597.61
Brand: Dellorto
Carburetor Spring for PGBH carburetor.
Reference: S6-31RT-PWK30
Brand: Stage6
The R/T PWK Carburetor is a new development from KOSO, produced exclusively for Stage6. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. The outside measurements and the size of the connection to the intake manifold have been reduced so that mounting is easier. Furthermore, the black racing finish...
Reference: 241.688
Brand: Polini
The Polini Max Hi-Speed is one of the most drivable variators available for Maxi Scooters. Real attention has been paid to the build quality that makes better use of the belt than the original variator. This means that the ratio of the variator changes in low-torque situations. This results in improved acceleration and higher top speed. Both reliability...
Reference: NK102.01
Brand: Naraku
Complete set of quality crank oil seals from Kymco, Sym scooters with horizontal cylinders. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: BT24017
Brand: Scootertuning.ca
Rear brake cable Rusted, seized or sticking brake cables can be a safety risk. If you notice any of these symptoms, it’s time to get it sorted. Suitable for all 4-stroke low-cost Chinese-built scooters. Please check the length of the original item. This cable is 190cm in length.
Reference: BT14736
Brand: Scootertuning.ca
Oil strainer O-ring bolt – 139QMB/QMA
Reference: TRS-KB001/BK
Brand: TRS
TRS key head is made with 6061 aluminum and cnc right here in merica. Nice little addition to your honda ruckus or met. Note: you must grind off top of key to fit inside slot. Has set screws. Comes only in black contrast cut.
Reference: 201.0170
Brand: Polini
Polini carburetors are lodged a flat slide lightweight chrome alloy, highly resistant to abrasion and wear, which improves slip. Polini carburetors allow more efficient to have every rpm benefits. Providing better acceleration and recovery, also improving the extension at maximum speed and optimizing the power output. They provide a simple adjustment with...
Reference: S6-3219002
Brand: Stage6
Working closely together with the US manufacturer Moto Tassinari, who is famous for high performing reed valves in the field of motocross engines, this V-Force3 has been developed. This construction of the double V-reeds is patented and thanks to its huge inlet diameter and an optimized airflow, it provides much better filling of the crankcase. To ensure...
Reference: 28011
Brand: Scootertuning.ca
Alternator stator for 50cc Kymco horizontal AC engines. Stator unit incl. wire set and pick up. Ready-to-install!
Reference: R16086
Brand: Motoforce
Motoforce is well-known as supplier for inexpensive high-quality replacement parts. Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with...
Reference: S410000200011
Brand: Athena
Athena has developed a complete range of very high-quality air filters for motorcycles and scooters. Athena filters are designed to adapt perfectly to the air-box and are a perfect replacement for the original filter. This special structure ensures perfect filtering, combined with excellent air flow under all conditions of use. This particular universal...
Reference: 4VP-E7211-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5FM-F8349-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: VC33895
Brand: Scootertuning.ca
Replacement brake pads for Kymco Scooter.
Reference: 1100-1435.5
Brand: NCY
NCY 88cc Aluminum Performance Cylinder Head. Great quality alloy cylinder head designed to work seamlessly with 1100-1237 88cc cylinder kit. Give your QMB139 the power to actually get some respect. You can use this cylinder on all QMB139 engines from SYM, Kymco, QLink, Filly 50 as well as other Chinese scooters with the QMB139 engine. Note:Rocker arm...
Reference: SCT-H053-001
Brand: Scootertuning.ca
We offer here inexpesive replacement coil for Honda and GY6 engine.
Reference: TRS-AS423/AL
Brand: TRS
We were tired of waiting for these to come in stock so we made our own. Fits all 12mm axles.. Made from 6061 Billet Aluminum right here in the USA. Comes in Raw and Anodized Black.
Reference: MF72.00007
Brand: Motoforce
Motoforce now offers a very good and durable drive belt to fit many scooter models. This product doesn't need to fear comparison with counterparts from bigger manufacturers and is available at a great price.