Top sellers

• 

  CAD$ 819.99 Out of stock

  Reference: TRT-1001

  Brand: 2Fast

  

  Cylinder kit 2Fast 86cc 13mm Minarelli Horizontal

  2fast offers here a ø50mm Racing cylinder engine Minarelli Horizontal liquid Cooled. The 2Fast is one of the best high-end 86 of the cylinder market, a must! 6 aluminum cylinder transfers Barete exhaust, cylinder head stud ... very heavy! Of course, we recommend a racing exhaust, an inner rotor ignition and a big carburetor.

  CAD$ 819.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 1,199.99 Out of stock

  Reference: SCT-B4TUP

  Brand: Scootertuning.ca

  

  Engine Upgrade Racing Bws / Zuma / C3 50F

  Engine Package kit for Yamaha 50F engine including high performance Two Brothers Racing exhaust. All the best parts to get the maximum performance with your scooter. Please see below what parts are include in the package.

  CAD$ 1,199.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 7.99 In stock

  Reference: MF10.14005

  Brand: Motoforce

  

  Gasket Set Motoforce Standard 50cc Piaggio AC

  This is the complete gasket set for original or 50cc replacement cylinders. Check the picture to see which gaskets are included.

  CAD$ 7.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 18.99 In stock

  Reference: BT25765

  Brand: Scootertuning.ca

  

  Light resistor for GY6 50/125-150cc

  Low-cost dropping resistor for the lighting system of various 50, 125 and 150cc GY6 4-stroke Kymco and Chinese-built scooters. (5 Watt / 5 Ohm & 20 Watt 5,9 Ohm)

  CAD$ 18.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 61.99 In stock

  Reference: IP33165

  Brand: Scootertuning.ca

  

  Electric Starter Motor for Piaggio 2T

  Replacement 12V 0.15KW starter motor with 11 teeth for Piaggio, Gilera, Kymco and Sym 50cc scooters.

  CAD$ 61.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 59.99 Out of stock

  Reference: 375543

  Brand: Scootertuning.ca

  

  Rear Mudguard Pre-Bug Zuma / Bws'r Black

  CAD$ 59.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 299.99 Out of stock

  Reference: 482219

  Brand: Teknix

  

  Replacement Fork Teknix (USA 96-01 BWS ONLY)

  Complete Fork Teknix standard origin for Yamaha Bwsr/Zuma 1996-2002.

  CAD$ 299.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 35.99 In stock

  Reference: NK201.22

  Brand: Naraku

  

  Repair Kit Naraku for PHVA / PHBN (14-17.5mm)

  Naraku carburettor repair kit for PHVA / PHBN carbs.

  CAD$ 35.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: 3BN-21770-01-00

  Brand: Yamaha

  

  Oil Tank Cap (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: 1CD-F6351-00-00

  Brand: Yamaha

  

  Rear Brake Cable (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 219.99 Out of stock

  Reference: 1CD-WH203-02-00

  Brand: Yamaha

  

  Ignition Switch with Fuel Cap (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 219.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 23.99 In stock

  Reference: BM01440

  Brand: Scootertuning.ca

  

  Oil Tank Cover PGO Bigmax Blue

  CAD$ 23.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 309.99 In stock

  Reference: TFC-001

  Brand: TFC

  

  Cylinder Package TFC 78cc 48mm, 43.2mm Crankshaft (AF16-AF18E)

  TFC Quality 78cc cylinder kit including crankshaft. This kit will offer a great power increase! The slotted head will help to keep the cylinder kit temperature lower. WARNING ; Must use these crank bearings! They are 1mm thinner than regular Dio bearings. Bearing code ; SC04A47CS32PX1/3AS

  CAD$ 309.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 31.99 In stock

  Reference: STR-620.12/BK

  Brand: Str8

  

  Tail Light / Indicator set lens STR8 Black (SR50)

  STR8 Indicator Lens Set (4) with tail light transparent black. We recommend using coloured bulbs with these lenses, red bulbs for the brake light and orange bulbs for the indicators. Transparent black.

  CAD$ 31.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: Dio-cgas-1-56

  Brand: Taida

  

  Cylinder head gasket Taida 1mm (56mm) AF16 - AF18

  Replacement Taida Cylinder head gasket 1mm for 56mm cylinder.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 8.99 In stock

  Reference: Dio-cgas-0.5-56

  Brand: Taida

  

  Cylinder head gasket Taida 0.5mm (56mm) AF16 - AF18

  Replacement Taida Cylinder head gasket 0.5mm for 56mm cylinder.

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 159.99 In stock

  Reference: IP21633

  Brand: Scootertuning.ca

  

  Replacement Crankshaft (AF16)

  Very good quality aftermarket crank for Honda SYM AF28 and Kymco GR1 engines. The crank is a 100% match to the original and is an outstanding aftermarket item. Also a good everyday choice for lightly-tuned 70cc sports engines. Crank requires 12mm gudgeon pins, as originally factory-fitted. When fitting a new big end, we recommend a new set of bearings and...

  CAD$ 159.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 7.99 Out of stock

  Reference: 14320141

  Brand: Airsal

  

  Gasket set Airsal Sport 50cc Hyosung

  Airsal Sport cylinder gasket set - Hyosung SF50

  CAD$ 7.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: BT12001

  Brand: Scootertuning.ca

  

  Kickstart Shaft (46mm/20mm) for GY6 50cc 139QMB/QMA

  Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 379.99 In stock

  Reference: M4T61-N

  Brand: Turbokit

  

  Exhaust Turbokit Gmax GY6 50cc

  Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal...

  CAD$ 379.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 73.99 Out of stock

  Reference: GY6-gear1836

  Brand: Taida

  

  Secondary Gear Kit Taida 18/36 +35% for GY6 125-150cc

  Taida gears set longer by 35% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number...

  CAD$ 73.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 51.99 In stock

  Reference: GY6-CGA

  Brand: Taida

  

  Chain Guide Taida Type A for GY6 125-232cc

  Taida Chain Guide available in 2 model : A and B

  CAD$ 51.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 199.99 Out of stock

  Reference: NK700.13

  Brand: Naraku

  

  Carburetor Naraku 30mm Racing (diaphragm operated) for GY6 125-180cc

  Naraku 30mm racing carb for 125-300cc engines. Racing only! 35Mm connection, 50mm on the filter side. Throttle cable layout on the side.Build height corresponds with the original. Please check that this carb is suitable before ordering. Different air filter required, different inlet manifold, or adapted original.

  CAD$ 199.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 81.99 Out of stock

  Reference: FLP-018

  Brand: FLP

  

  Keyless Gas Cap FLP BBS CNC Aluminium Honda Ruckus

  Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.

  CAD$ 81.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 156.99 In stock

  Reference: TRS-RSB5220/MI

  Brand: TRS

  

  Rear Sets Backs Peg Bracket TRS Milled Honda Ruckus

  The TRS rearset backs are a great addition to your ruckus for that sportbike feel. Attaches to side of frame using stock holes and provided stainless hardware. Raw Billet Aluminum 6061 1/2" plate SUPER THICK AND STRONG; Mounts to your stock engine mount location; Pegs NOT included, however any aftermarket pegs will work! Made in USA.

  CAD$ 156.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 40.99 Out of stock

  Reference: TRS-AFB/BK

  Brand: TRS

  

  Anti-Flex Bushing TRS Black Honda Ruckus

  The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,” is a problem created when your Ruckus has a load or the ride height has been adjusted. The engine/rear axle is mounted with 3 points, and since these 3 mounting points are unevenly distributed, the lean or slant...

  CAD$ 40.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: DIO-studs-130

  Brand: Taida

  

  Extended Cylinder Studs Taida M6 130mm (AF16-AF18E)

  Taida Extended cylinder for Honda Dio especially made for the Taida V2 liquid cylinder kit. Include 4 studs and nuts.

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 1,199.99 In stock

  Reference: RW-009

  Brand: Rolling Wrench

  

  Engine Performance kit Rolling Wrench Yamaha Bws/Zuma 50F

  Do you want your scooter to go 50mph? I thought so! This is the ultimate performance kit. This kit will come with a 76cc big bore kit with head, Rolling Wrench Fuel injection tuner (no other tuner on the market will work with this big bore kit). NOW COMES WITH A PERFORMANCE VARIATOR, ROLLERS, CLUTCH CONTRA SPRING AND BELT (GEAR KIT UP NO LONGER NEEDED...

  CAD$ 1,199.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 70.99 In stock

  Reference: MF19.19588

  Brand: Motoforce

  

  Cylinder Motoforce Eco 50cc Cpi-Vento-Keeway (12mm)

  If you’re looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though. Comes without cylinder head! The original head can be kept.

  CAD$ 70.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 112.99 In stock

  Reference: 215.0437

  Brand: Polini

  

  Intake Polini Evolution 35mm Piaggio

  Polini intake manifold including CNC-machined aluminum spacer. Suitable for scooter models with Piaggio engine with 24-30mm PWK, PHBH or VHST carburetor. Carburetor connection: 35mm. Intake: 30mm

  CAD$ 112.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 96.99 In stock

  Reference: 2013802

  Brand: Malossi

  

  Intake Manifold Malossi Viton 35mm Piaggio

   Malossi has a two-part intake manifold on offer to match the bulky Dellorto VHST carburators. This manifold consists of a base plate and a flexible, angled rubber sleeve, which will be clamped between base plate and engine intake. The inlet manifold has an internal diameter of 30mm and a connection diameter of 35mm.

  CAD$ 96.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: 1100-1214

  Brand: Scootertuning.ca

  

  CVT Cover Black GY6 125-150cc (Long Case)

  Left side / CVT cover for GY6 Long engines.Typically found on scooters with 11"-13" rear wheels.

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: 1200-1025.10

  Brand: NCY

  

  Clutch Springs NCY GY6 125/150cc (2000rpm)

  Get better acceleration on your GY6 by upgrading your clutch springs! 2000 RPM NCY clutch springs, set of 3. Clutch springs help determine the RPM that the clutch will engage at.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 In stock

  Reference: P11347

  Brand: Replay

  

  (2X) Indicators Replay Mini Arrow Orange / Chrome

  CAD$ 44.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 25.99 In stock

  Reference: S6-5214001

  Brand: Stage6

  

  Torque spring Stage6 Soft Piaggio-GY6

  These black-coated torque springs from Stage6 are available in different strengths. Due to tuning, the drive belt may start to slip, which will make a stronger torque spring necessary. You will usually notice that the engine revs up but you can't feel any acceleration. The strength of a torque spring is marked on the spring itself so you won't have any...

  CAD$ 25.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 63.99 In stock

  Reference: S6-5114000

  Brand: Stage6

  

  Front Pulley Stage6 CNC Piaggio

  Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...

  CAD$ 63.99

  Add to cart More

  In stock

  Add to Compare