Top sellers

• 

  CAD$ 37.99 In stock

  Reference: S6-4030ET02

  Brand: Stage6

  

  Temperature sensor Piaggio L/C Black Connector

  In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 Out of stock

  Reference: RH-160013

  Brand: Ruckhouse

  

  Handlebar Ruckhouse AL6061 760mm

  Ruckhouse AL6061 31.8mm handlebar for Honda Ruckus. Attention! Ruckhouse Cold Forged Stem required. This handlebar doesn't work with regular stem like NCY. Width: 740mm - Clamp size: 31.8mm - Rise: 30mm - Geometry: 5° upsweep, 7° backsweep - Weight: 330g - Material: 7075-T6 aluminum

  CAD$ 34.99

  More

  Out of stock

  Add to Compare
• 

  CAD$ 209.99 In stock

  Reference: 171.0672

  Brand: Polini

  

  Replacement Rotor Polini PVL Minarelli

  Replacement Rotor for Polini PVL minarelli ignition.

  CAD$ 209.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 41.99 In stock

  Reference: 472642

  Brand: Tun'R

  

  Front pulley Tun'r Minarelli

  Replacement Front Pulley from Tun'r

  CAD$ 41.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 79.99 In stock

  Reference: 0413527

  Brand: Malossi

  

  Air Filter Malossi E13 (42-50-60mm)

  Too often we neglect the simplest and in fullest sight components of our engine, whereas we could allow it to work better, to give better performances and to be more long-lived, with little operations. Let's consider for instance the feeding system, which supplies the "store"of air and petrol tightly releted to the engine performances. The filter task has...

  CAD$ 79.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 199.99 In stock

  Reference: SW-H34S

  Brand: Sunworld

  

  Carburetor Sunworld Racing Type PWK 34mm

  Sunworld PWK Carburetor is a very high precision Carburetor. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. They have been used for several years in the race and have been proven. The carb is of course equipped with a power jet; and in order to easily find the optimal adjustment, instructions are...

  CAD$ 199.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 639.99 In stock

  Reference: TRT-10000

  Brand: 2Fast

  

  Exhaust System 2Fast 100cc Minarelli Horizontal

  The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System. Available in 70, 86, 90, 94 and 100cc Minarelli Horizontal.

  CAD$ 639.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 1.99 In stock

  Reference: 1P3-F3147-00-00

  Brand: Yamaha

  

  Rear Brake Camshaft O-ring (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 1.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 89.99 Out of stock

  Reference: 5PJ-H2910-03-00

  Brand: Yamaha

  

  Left Handlebar Switch Complete (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 89.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 31.99 In stock

  Reference: 1CD-F1741-00-P2

  Brand: Yamaha

  

  Tail Cover White Metallic (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 31.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 199.99 Product available with different options

  Reference: FLP-007

  Brand: FLP

  

  Front Light FLP Monster Eye CNC Black Honda Grom

  Insired by Mike Wazowski from Monsters Inc. These brackets allow you to replace your stock Grom headlight with a single round 7″ light. The brackets come anodized black or raw, and are built in with flush mounted turn signals. Includes: Brackets BLACK or RAW / Turn Signals amber eagle eye / Spacers / Hardware / Round 7″ LED LIGHT. You will need to buy a...

  CAD$ 199.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 57.99 In stock

  Reference: 53205-GAH-000/BK

  Brand: Scootertuning.ca

  

  Handlebar Cover Honda Dio Black (Japan Only)

  CAD$ 57.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 621.99 Out of stock

  Reference: RH-050

  Brand: Ruckhouse

  

  Front & Rear Custom wheels Hub Kit (4x102) Honda Grom

  This is the complete hub kit allowing to use 13x6 & 12x6 2 custom wheels on Honda Grom including all the required parts.

  CAD$ 621.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: IP34593

  Brand: Scootertuning.ca

  

  Water pump repair kit (Piaggio)

  Water pump repair kit for various Piaggio LC engines. All pictured parts included.

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 51.99 In stock

  Reference: 248.041

  Brand: Polini

  

  Drive Belt Polini Kevlar (Minarelli 100cc)

  Kevlar Maxi Belt by Polini. The most durable v-belt Polini offers has additional Kevlar inlays that, together with the interwoven aramid fibres, makes this belt extremely resistant to tearing. This is not Polini’s top choice for the race track for nothing. The grip is so good that, despite the high Kevlar content, the belt slip is heavily reduced when...

  CAD$ 51.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 29.99 In stock

  Reference: VC19985

  Brand: Bando

  

  Drive Belt Bando V/S (Minarelli 100cc)

  High-quality Bando V/S belt, durable and well-engineered. Size: 757-17.3-28 Suitable for all vehicles with 100cc 2-stroke Minarelli engines. 8510604 / R16140641A0 / 4871702091 / 4VP1764100

  CAD$ 29.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 Out of stock

  Reference: MOT112952

  Brand: Motul

  

  Fork Oil Motul Expert 10W (1L)

  Hydraulic Fluid for any telescopic fork. 4 Viscosities: Light-Medium-Medium/Heavy-Heavy. Contains an Anti-Friction additive developed by Motul, making easier sliding, avoiding drag in the fork • Stable absorbing in an extended range of temperature • Protection of seals: excellent oil/ elastomer compatibility. Anti wear, anti corrosion, anti foaming

  CAD$ 21.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 10.99 Out of stock

  Reference: BT14430

  Brand: Scootertuning.ca

  

  Kickstart Castle Washer for GY6 50cc 139QMB/QMA

  Carrier sprocket for the variator v-belt pulley fan. The kick-start carrier accompanies the kickstarter sprocket. It sits on the crank in front of the crankcase and its teeth can become worn, causing kickstarter issues.

  CAD$ 10.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 49.99 In stock

  Reference: GY15430

  Brand: Scootertuning.ca

  

  Engine screw set for GY6 125-150cc

  Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.

  CAD$ 49.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 167.99 Out of stock

  Reference: 1000-1324.8

  Brand: NCY

  

  Front Rim NCY Honda Ruckus Black

  Front 10'' wheel rim from the NCY front end fork & disc brake kit for Ruckus. Attention! Cannot be used with the OEM drum brake kit, you have to convert your ruckus to front disc brake with new fork, caliper and hydrolic brake master cylinder to use this wheel.

  CAD$ 167.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 19.99 In stock

  Reference: IP31980

  Brand: Scootertuning.ca

  

  Carburetor to manifold connector rubber (20mm)

  Rubber adaptor for connecting the carburettor and intake manifold. Jubilee clips included. Inside diameter: 20mm

  CAD$ 19.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: BT13841

  Brand: Scootertuning.ca

  

  Engine gasket set (743mm) GY6 Short Case 125-150cc

  Complete engine gasket set for 125cc GY6 engines with 743mm v-belts (152QMI engines). Set contains all the servicing-relevant gaskets: a cheaper option than buying them all separately. Crank oil seals not included. We offer these as part of a crank seal set. This set can also be used on 150cc variants, but this requires you to order the 150cc head gasket;...

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 63.99 In stock

  Reference: GY14682

  Brand: Scootertuning.ca

  

  Electric starter motor for GY6 125-150cc

  Starter motor for GY6 125/150cc, supplied with connector cable.

  CAD$ 63.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 54.99 Out of stock

  Reference: FLP-012

  Brand: FLP

  

  Radiator Cap FLP Crown CNC Aluminium Honda Ruckus

  Give your get some flare with the new ROYAL RAD CAP. Hides away the ugly stock radiator cap. 2 set screws secure the cap onto the your old radiator cap. Work for stretched ruckus only. The perfect match for our ROYAL gas cap. Made in USA.

  CAD$ 54.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: DIO-studs-w140

  Brand: Taida

  

  Extended Cylinder Studs Taida 140mm (AF16-AF18E)

  Taida Extended cylinder for Honda Dio especially made for the Taida 97cc & V2 liquid cylinder kit. Include 4 studs and nuts.

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 24.99 Out of stock

  Reference: DR-FZ00380

  Brand: DR

  

  Clutch bell DR Evolution Top Performance Aprilia SR50 Morini

  Worn out clutch bells contribute to a much higher abrasion of clutch linings. You can see that it's time to replace your clutch bell from blue discolourations and from grooves in the surface. When the clutch slips or bucks you know that the clutch bell is out of alignment.

  CAD$ 24.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 23.99 In stock

  Reference: S6-1021010

  Brand: Stage6

  

  Front Brake Pads Stage6 (SR50)

  Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...

  CAD$ 23.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 169.99 Out of stock

  Reference: MF36.14001

  Brand: Motoforce

  

  Intake system Motoforce RACING 360 32mm Piaggio

  This Motoforce Racing intake system is equipped with a base plate that revolves through a full 360°. The system can be adapted to 14 positions, thus facilitating more room for carb and air filter. The reed valve included in the delivery comes with carbon reeds, and with its ample diameter, it makes high flow possible, which leads to better crankcase...

  CAD$ 169.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: 117438

  Brand: Malossi

  

  Gasket set Malossi Sport / Replica / Team Piaggio LC

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 20.99 Out of stock

  Reference: S6-74140ET02

  Brand: Stage6

  

  Gasket set Stage6 Sport/Racing MKII 70cc Piaggio AC

  This is the complete gasket set for Stage6 pro and racing MKII cylinders. Check the picture to see which gaskets are included.

  CAD$ 20.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 22.99 In stock

  Reference: 243.076

  Brand: Polini

  

  Torque Spring Polini GY6 125/150cc (+15%)

  Counter pressure spring by Polini for GY6 125/150cc, Kymco, Honda maxi scooters providing a 15% increase in pressure from the oriental spring and is ideally suited for tuning purposes. A stronger spring is necessary once the the power has been increased by tuning and the belt starts to slip. The clutch counter pressure springs works closely with the...

  CAD$ 22.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: MF96.90045

  Brand: Motoforce

  

  Thread Insert Motoforce M8x1.25mm

  A faulty thread in the engine or the cylinder can have serious (and very expensive) consequences. We therefore recommend these Motoforce thread inserts and the thread repair sets.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 259.99 In stock

  Reference: 318520

  Brand: Malossi

  

  Cylinder kit Malossi SPORT 50cc Piaggio

  Malossi also offers a cylinder with a bore of 40mm. Thanks to optimized port durations and an enlarged exhaust port, this grey cast iron cylinder yields about 2-3 hp more than the stock cylinder. The cylinder comes complete with gaskets, piston and head. Works very well with exhausts such as Yasuni Z or Laser Xpro.

  CAD$ 259.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 61.99 In stock

  Reference: S6-0571/WH

  Brand: Stage6

  

  Banner Stage6 70x200cm White

  Stage6 now offer banner with their logo on it! Excellent for give your garage racing style!

  CAD$ 61.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 229.99 In stock

  Reference: S6-9216800

  Brand: Stage6

  

  Exhaust system Stage6 Street Minarelli Vertical

  CAD$ 229.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 8.99 In stock

  Reference: DEL-53027.78

  Brand: Dellorto

  

  Iddle Srew Dellorto PHBG

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare