No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
How best to exploit the Minarelli...
Reference: 249.057
Brand: Polini
Latest Version of Evolution clutch from Polini. For a more stable adhesion 3G ForRace is now equipped with 3 clutch shoes. Using an Allen wrench can be adjusted continuously over the spring preload and read on a scale here too, the stall speed. Diameter: 125mm Weight: 923g
Reference: 5212487
Brand: Malossi
Clutches have friction material without asbestos and with patented adjusting system. MAXI DELTA CLUCTH allows from 3 to 9 different adjustments simply working on three fixing screws, and from 9 to 27 changing the setting springs and shoes, according to the model of the vehicle. It obtains high r.p.m. at the moment of traction to give excellent initial...
Reference: P11347
Brand: Replay
Reference: S6-5114000
Brand: Stage6
Drive face with optimized drive face angle. In order to keep costs down, original racing drives are usually cast or - even worse - pressed steel. When these parts are cooling down after casting, the metal is still molten and the drive face angles can often vary. Due to the fact that racing engines have a very narrow power band, these tolerances have...
Reference: 318520
Brand: Malossi
Malossi also offers a cylinder with a bore of 40mm. Thanks to optimized port durations and an enlarged exhaust port, this grey cast iron cylinder yields about 2-3 hp more than the stock cylinder. The cylinder comes complete with gaskets, piston and head. Works very well with exhausts such as Yasuni Z or Laser Xpro.
Reference: A380325
Brand: Scootertuning.ca
Reference: 075600/1
Brand: Athena
Attention! : Crankshaft Athena Racing 80cc 43mm stroke required! High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: 166.0113
Brand: Polini
This is the third edition of the Polini Evolution. It hasn't undergone any major changes, but the exhaust port has been completely revised and now features a bridged T-port instead of the Evo II's layout with two auxiliary exhaust ports. The combustion chamber basically remains unchanged, but the inner head cap has been given a new, thermally more...
Reference: 43450-GEZ-672
Brand: Honda
Replacement OEM Honda Parts.
Reference: 23559
Brand: Scootertuning.ca
Replacement side stand for Aprilia SR50 scooters – black.
Reference: Dio-cgas-1-56
Brand: Taida
Replacement Taida Cylinder head gasket 1mm for 56mm cylinder.
Reference: Dio-cgas-0.5-56
Brand: Taida
Replacement Taida Cylinder head gasket 0.5mm for 56mm cylinder.
Reference: DC32296
Brand: Dayco
Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: VC19985
Brand: Bando
High-quality Bando V/S belt, durable and well-engineered. Size: 757-17.3-28 Suitable for all vehicles with 100cc 2-stroke Minarelli engines. 8510604 / R16140641A0 / 4871702091 / 4VP1764100
Reference: 14320141
Brand: Airsal
Airsal Sport cylinder gasket set - Hyosung SF50
Reference: GY6-gear1836
Brand: Taida
Taida gears set longer by 35% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number...
Reference: GY15430
Brand: Scootertuning.ca
Bolt and nut set for GY6 125/150cc engines. Set contains almost all bolts, oil draining plugs, nuts, cylinder studs etc. Ordering individual engine bolts can be expensive, so here we offer a complete set at a fair price. Set pictured here is the complete set.
Reference: GY14873
Brand: Scootertuning.ca
Pressure-activated petrol tap for 50cc Chinese scooters with plastic tanks (e.g. New models of the Rex RS and Peugeot V-Clic) and most Chinese 4-stroke scooter GY6 125-180cc engines. A petrol tap failure can often lead to starting difficulties and cut-outs whilst riding. When the membrane is stuck, either no, or not enough, fuel passes through. To remedy...
Reference: BT13841
Brand: Scootertuning.ca
Complete engine gasket set for 125cc GY6 engines with 743mm v-belts (152QMI engines). Set contains all the servicing-relevant gaskets: a cheaper option than buying them all separately. Crank oil seals not included. We offer these as part of a crank seal set. This set can also be used on 150cc variants, but this requires you to order the 150cc head gasket;...
Reference: GY14682
Brand: Scootertuning.ca
Starter motor for GY6 125/150cc, supplied with connector cable.
Reference: FLP-018
Brand: FLP
Perfect plug and play add on for your ruckus. Bolt on , no parts to be swapped over from your stock cap. Key less , just snap and go. CNC lathe and mill finish. Integrated check valve.
Reference: FLP-012
Brand: FLP
Give your get some flare with the new ROYAL RAD CAP. Hides away the ugly stock radiator cap. 2 set screws secure the cap onto the your old radiator cap. Work for stretched ruckus only. The perfect match for our ROYAL gas cap. Made in USA.
Reference: TRS-AFB/BK
Brand: TRS
The TRS Ruckus Anti-Flex Bushing is the answer to those who are tired of that lean that you often see with the Ruckus. This “lean” or “slant,” is a problem created when your Ruckus has a load or the ride height has been adjusted. The engine/rear axle is mounted with 3 points, and since these 3 mounting points are unevenly distributed, the lean or slant...
Reference: MF19.14047
Brand: Motoforce
If you’re looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.
Reference: 3413581.B0
Brand: Malossi
Replacement Piston for Malossi I-Tech 70cc 4 stroke cylinder kit.
Reference: IP14666
Brand: Scootertuning.ca
Replacement camshaft bearing as replacement for the original when changing the camshaft. 12X32x10
Reference: DR-FZ00380
Brand: DR
Worn out clutch bells contribute to a much higher abrasion of clutch linings. You can see that it's time to replace your clutch bell from blue discolourations and from grooves in the surface. When the clutch slips or bucks you know that the clutch bell is out of alignment.
Reference: 215.0437
Brand: Polini
Polini intake manifold including CNC-machined aluminum spacer. Suitable for scooter models with Piaggio engine with 24-30mm PWK, PHBH or VHST carburetor. Carburetor connection: 35mm. Intake: 30mm
Reference: MF36.14001
Brand: Motoforce
This Motoforce Racing intake system is equipped with a base plate that revolves through a full 360°. The system can be adapted to 14 positions, thus facilitating more room for carb and air filter. The reed valve included in the delivery comes with carbon reeds, and with its ample diameter, it makes high flow possible, which leads to better crankcase...
Reference: 243.076
Brand: Polini
Counter pressure spring by Polini for GY6 125/150cc, Kymco, Honda maxi scooters providing a 15% increase in pressure from the oriental spring and is ideally suited for tuning purposes. A stronger spring is necessary once the the power has been increased by tuning and the belt starts to slip. The clutch counter pressure springs works closely with the...
Reference: SCT-1261272
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.
Reference: MF75.14010
Brand: Motoforce
New version. The variator from the Motoforce Racing series sets new standards when it comes to price performance ratio. The performance has been visibly improved, offering even better shifting characteristics. The variator comes with two or three weight sets, which gives a good basis for adjusting the vario to the set-up of the other scooter parts. Incl...
Reference: S6-4030ET02
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.