No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement Piston for the Stage 6 Streetrace 70cc Minarelli Vertical
This Low Down Shock is constructed of an anodized black billet body,...
Sunworld PWK carburettor is a very...
Reference: 1CD-F8311-00-P2
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F8311-00-P1
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 8350A-GS7-000/RE
Brand: Scootertuning.ca
Reference: 83400-GS7-000/OR
Brand: Scootertuning.ca
Reference: 83500-GAH-000/BK
Brand: Scootertuning.ca
Reference: CPR7EA-9
Brand: NGK
NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...
Reference: NK390.06
Brand: Naraku
Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engines. Vehicle list for Kymco scooters. Suitable for: KYMCO Super 9AC up to chassis No..: RFBS1010029101088 (small CDI as shown) KYMCO YUP 50 up to chassis No.: RFBS600002AA01380 KYMCO DJ 50 KYMCO Dink 50 (small...
Reference: TRS-KICK001/BK
Brand: TRS
TRS CNC Kickstand with the Kickstand mount for Honda Grom.
Reference: 19002
Brand: Scootertuning.ca
Replacement oil pump for all scooters with Kymco / SYM upright engines.
Reference: TH18ADIO50-39
Brand: Scootertuning.ca
Replacement Gasket set for 39mm AF16-AF18 Cylinder kit.
Reference: DIO-gear1740
Brand: Taida
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones.
Reference: BT13909
Brand: Scootertuning.ca
Rubber float bowl gasket for all original and Naraku NK200.01 carbs for GY6 50cc engines 1239 QMB/QMA.
Reference: GY28522
Brand: Scootertuning.ca
Matching cylinder head gasket for maxi scooters with 150cc GY6 engine
Reference: GY6-IM28
Brand: Taida
Reference: 4WX-E5411-00-33
Brand: Yamaha
Remplacement CVT cover for Yamaha Bws / Zuma 2002-2011
Reference: RH-158
Brand: Ruckhouse
The primary use of the oxygen sensor spacer is to take your O2 sensor out of the exhaust stream so that your O2 sensor senses less oxygen in the exhaust pipe. The oxygen sensor extender made from mild steel and Chromed to avoid cracking and excessive heat expansion. 100% test before shipping. The oxygen adapter unique stepped design to get rid of the open...
Reference: NK100.74
Brand: Naraku
Repair kit for Chinese GY6 125/150cc 152/157QMI original and Naraku 24mm carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster screw with spring. Convenient repair kit as an alternative to a new carb. Supplied as shown.
Reference: GY14637
Brand: Scootertuning.ca
As original kick-start shaft. A defective shaft is often the cause of sticking kick-starts, or noises when starting.
Reference: RH-189
Brand: Ruckhouse
Looking for a stylish way to cover the front of your battery box on your Honda Ruckus now that you got rid of the stock headlights? Check this out! Fully CNC Machined Billet Aluminum, designed to make the front of the battery box stand out, and look like it was meant to be without headlights! Comes in Raw or Gloss Black Powder Coated. Stainless Hardware...
Reference: DIO-pip-A
Brand: Taida
Taida high quality medium volume exhaust for Honda Dio with Stroker Taida Engine. This exhaust allow to reach the full potential of your Taida stroker cylinder kit.
Reference: 31619E
Brand: Giannelli
Reverse exhausts have been developed by Giannelli R&D to offer a top-level system. The muffler is manually welded and the inner cone-shaped structure provides performance increase at higher range while keeping noise levels within European standards. Transparent paint and reversed kevlar silencer enlight the race spirit of Reverse exhausts. Depending...
Reference: KW20913
Brand: Scootertuning.ca
Original primary gear shaft for CPI engines. This is where the rear pulleys (clutch / torque driver) incl. clutch bell will be mounted.
Reference: SCT-TS008
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with Detroit Theme.
Reference: P400099100002
Brand: Athena
High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of mechanical stresses. This aluminium cylinder is casted in steel...
Reference: 030738311
Brand: Tecnigas
Nice results with an exhaust retaining unobtrusive looks – that’s what you get with these Tecnigas exhausts. Extra torque, and top speed is about 5 mph higher.
Reference: MF24.14003
Brand: Motoforce
A high-quality replacement piston from Motoforce available at a fair price. Suitable for original cylinders! Comes with piston rings, pin and clips.
Reference: 17245
Brand: Scootertuning.ca
High quality fabric covering. Covering the best in our range. Suitable for smaller scooters without topcase, usually with 10-inch wheels size.100% polyester fabric; Extremely tear resistant; 100% waterproof; UV stabilized and cold-stable; Heat resistant Exhaust area; Elastic and hook clamp for efficient mounting; Enhanced lock body. Include Transport bag
Reference: MF99.00501
Brand: Motoforce
A handy tool that you can easily take with you. Comes with all the common keys necessary for your scoot, sizes from 2 to 8. Key sizes: 2; 2.5; 3; 4; 5; 6; 8
Reference: NG087
Brand: NG
NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All discs are TÜV Rheinland certified and road legal and come with federal operating approval. OEM-version matches the original item, but some models may vary.
Reference: TUB317-3
Brand: Yasuni
Model Carrera 10 with competition performance. Lighter exhaust for a better power-to-weight ratio. Better gas flow channeling. The exhaust pipe structure is equipped with different reinforced cones from the cylinder outlet to the silencer. It comes equipped with an aluminum muffler. Also available in Red, Black, Carbon and Carbon/Kev. The power range is...
Reference: 537600
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Reference: TRT-H47
Brand: 2Fast
Replacement inned cylinder head (Dome) for 2Fast 47.6mm cylinder kit.
Reference: 265241
Brand: Doppler
La nouvelle version de la Dopper S3R désormais disponible avec homologation routière et un beau silencieux en aluminium poli. Fonctionne très bien avec des cylindres sport 70cc ce qui est assez inhabituel puisque cet échappement est fabriqué en France, où cylindres 70cc ne sont pas autorisés à être vendus. Selon le modèle, un ou deux ensembles de rouleaux...