No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
Ready to bring your bike into a class...
Reference: TRT-H50
Brand: 2Fast
Replacement inned cylinder head (Dome) for 2Fast 50mm cylinder kit.
Reference: NK900.51
Brand: Naraku
Naraku Sports Contra Spring V.2 Pack, +1000, +1500, +2000 rpmThe current version of the Naraku counter pressure spring uses a modified alloy spring providing better resilience and above average strength.Torque springs are available in packs of 2 or 3 or are available to purchase individually.Replacing the spring is necessary when tuning engines, the idea...
Reference: 0413258
Brand: Malossi
With the E15, Malossi has designed the first big and open air filter. Connection sizes are 60mm.
Reference: VCR-RD13.CNC/BK
Brand: Voca
New VOCA bell mouth developed on testing bench, race track and computer based fluid dynamic simulation. The result is a bell mouth that optimizes the admission and increases the performance of the engine. Easy fitting! The CNC machined bell mouth is mounted on the carburettor with three screws. Perfect fit on KEHIN PWK and VOCA FT carburettors. Available...
Reference: 31073350
Brand: Airsal
In order to fully exploit the 90cc capacity of the Airsal Racing Xtrem cylinder, a matching crankshaft with a stroke of 45mm is required. The matching full-circle crankshaft from Airsal is very well made (visually as well as technically), and with its 45mm stroke, its 85mm conrod and the 12mm small-end bearing it offers slightly higher capacity also for...
Reference: S6-9616606
Brand: Stage6
Just like its predecessor, the Stage6 R/T MKII has been made of 0.8mm sheet steel. Elaborately hand-welded out of numerous cones, the exhaust doesn’t only convince with its amazing performance, but also looks good. A spring-mounted carbon silencer with CNC-machined end caps, clean weld seams and an exhaust bracket with rubber support round off the amazing...
Reference: 53212-GEE-000
Brand: Honda
Replacement OEM Honda Parts.
Reference: 1CD-F1721-00-EY
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5CA-F1815-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5SK-H3311-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 8350A-GS7-000/RE
Brand: Scootertuning.ca
Reference: 83600-GAH-000/BK
Brand: Scootertuning.ca
Reference: 19002
Brand: Scootertuning.ca
Replacement oil pump for all scooters with Kymco / SYM upright engines.
Reference: 174.0063
Brand: Polini
The organic coating composition can be dosed easily and protects the brake disc. This Polini brake lining has a KBA released and may be legally used on public roads as high-quality spare parts. HxWxD: 42,0x96,5x7,4mm HxWxD: 42,0x77,0x7,8mm
Reference: DIO-gear1740
Brand: Taida
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones.
Reference: 26784
Brand: Naraku
Complete engine gasket set for horizontal Kymco SF10 AC engines. This gasket set contains all relevant gaskets needed for complete serving of air-cooled engines. Please note: Set does not include oil seals.
Reference: MOT103250
Brand: Motul
Cleans the outside of the helmet without leaving any marks. Anti-insect effect. Suitable for all helmets.
Reference: 66-08000
Brand: Matrix
Easy to use & fits under C1, M2, A2 & M64 Stands. Made from recycled plastic. Low profile drain pan can be used in the garage or at the track. Holds 6 qts.Safely stores oil in a non spill container until it can be correctly disposed of. Translucent material allows you to see when container is full.
Reference: 241.400
Brand: Polini
Polini’s Hi-Speed variator offers some of the strongest drive of any variator on the market. The roller surfaces make for improve transfer of power meaning increased acceleration, with less focus on the top end speed. Power you can feel, but not quite as strong as the option from Malossi and co. Makes a great everyday vario. Delivery includes: 2x sets...
Reference: TUB225
Brand: Yasuni
Sports exhaust system optimized for 70cc cylinders, with E-certification. Yasuni is always striving to offer the perfect product. The Yasuni R is the perfect scooter exhaust. Developed from the Yasuni Z system and perfectly adapted to 70cc sports to mid-race cylinders. A little more volume and a slightly wider cone mean greater efficiency and a more...
Reference: BT15632
Brand: Scootertuning.ca
SLS Exhaust system gasket – 130QMB/A
Reference: NK100.27
Brand: Naraku
Complete cylinder gasket set for all 39mm Naraku or original 4-stroke cylinder sets. Kit contains all necessary gaskets from the cylinder base up and is an exact replacement for the original cylinder and Naraku cylinder sets with 39mm/50cc capacity.
Reference: GY28522
Brand: Scootertuning.ca
Matching cylinder head gasket for maxi scooters with 150cc GY6 engine
Reference: SCT-1281247
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.
Reference: NK100.74
Brand: Naraku
Repair kit for Chinese GY6 125/150cc 152/157QMI original and Naraku 24mm carburettors. Comes with adjustable needle, needle clip, main jet, pilot jet, float bowl gasket, idle jet, mix adjuster screw with spring. Convenient repair kit as an alternative to a new carb. Supplied as shown.
Reference: TRS-DBA9912/AL
Brand: TRS
Looking to run RRGS, Adelin, ScooterTuning or NCY front forks but wanna keep the OEM drum brakes. We have a fix for ya. Simple bolt on bracket with all the hardware and spacers included. These are now in Billet 6061 aircraft aluminum and anodized in black or raw finish.
Reference: RH-206
Brand: Ruckhouse
Reference: TRS-FBLS001/BK
Brand: TRS
Honda Ruckus Frame Brace for Lowboy Seat Frame aka DORF seat frame. Made from 6061 Solid Billet. Machined right here in the USA. Comes with instructions, fender washer and stainless hardware for use with or without a front frame cover.
Reference: RPR-STSP/
Brand: rPRO
Step-Tone series is our latest brainchild in our line of billet parts. Offering assorted anodized colors with two-tone combinations, gives the end user a more creative color palette to work with, thus achieving the best color scheme possibilities for their builds.
Reference: DIO-Manifold-G04
Brand: Taida
Taida Performande honda Dio Big Valve Intake with 32mm connection. Allow to use PWK carburetor from 21mm to 28mm.
Reference: POL-KTK-CP21
Brand: Polini
Polini CP Carburetor kit adapted for Kymco / PGO / Genuine intake manifold. The kit include the carb, the intake adaptor and the choke cable. We recommend to purchase a jet kit in order to adjust the carburetor with your engine. Polini CP need PWK / CP jet kit.
Reference: PI-82645R
Brand: Piaggio
Reference: S6-2019502P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. The original gears in some models are quite short; this is where you can gain some km/h more even with original cylinders. Different from common gear units, the ones...
Reference: NK101.47
Brand: Naraku
High-torque 70cc NARAKU cylinder kit with 12mm gudgeon pin. This cylinder kit is not designed to be revvy, but rather it shows its strengths in the lower range. Just above the idling speed comes solid, constant and very strong acceleration. All that, without straining the engine at unnecessarily high engine speeds. The power output from standing make for...