No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
BLACK SERIES is The Two Brothers...
Reference: NK102.81
Brand: Naraku
These Naraku cylinder gasket sets contain all the necessary gaskets from the base gasket upwards and can be optionally used on the Naraku 2-stroke cylinders, but are also suitable for original cylinders and standard cast iron cylinder sets from other manufacturers.
Reference: CPR7EA-9
Brand: NGK
NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...
Reference: NK390.06
Brand: Naraku
Naraku unrestricted CDI unit. Can also be used on untuned engines, and increases the rev limit from the original 8-9,00rpm. A must for tuned engines. Vehicle list for Kymco scooters. Suitable for: KYMCO Super 9AC up to chassis No..: RFBS1010029101088 (small CDI as shown) KYMCO YUP 50 up to chassis No.: RFBS600002AA01380 KYMCO DJ 50 KYMCO Dink 50 (small...
Reference: TH18ADIO50-39
Brand: Scootertuning.ca
Replacement Gasket set for 39mm AF16-AF18 Cylinder kit.
Reference: DIO-gear1740
Brand: Taida
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones.
Reference: KW23159
Brand: Scootertuning.ca
Replacement oil pump drive gear for scooters with Minarelli-based 2-stroke Chinese-built engines and Minarelli 50cc 2-stroke AC/LC engines.
Reference: M4T66-N
Brand: Turbokit
Among insiders, the Turbo Kit name is synonymous with peak performance. The GMax Scooters exhaust is a new product, which combines everything that a 4-stroke Scooters rider could ever desire. Maximum power, muffled, unobtrusive sound, stainless steel / aluminium construction, great looks, outstanding value for money and everything absolutely road legal...
Reference: GY28522
Brand: Scootertuning.ca
Matching cylinder head gasket for maxi scooters with 150cc GY6 engine
Reference: GY6-T-300
Brand: Taida
Taida Racing Camshaft (6.3/6.25) for sports and racing cylinders. This camshaft will offer great improve at high RPM. Suitable for 125/150cc scooters, quads etc. with GY6 engines. This is the T-100 medium version. The T-300 and T-One High rev version are also available. Lift : IN 19.4/25.7 – EX 19.2/25.45
Reference: GY6-IM28
Brand: Taida
Reference: 4WX-E5411-00-33
Brand: Yamaha
Remplacement CVT cover for Yamaha Bws / Zuma 2002-2011
Reference: RH-158
Brand: Ruckhouse
The primary use of the oxygen sensor spacer is to take your O2 sensor out of the exhaust stream so that your O2 sensor senses less oxygen in the exhaust pipe. The oxygen sensor extender made from mild steel and Chromed to avoid cracking and excessive heat expansion. 100% test before shipping. The oxygen adapter unique stepped design to get rid of the open...
Reference: RH-189
Brand: Ruckhouse
Looking for a stylish way to cover the front of your battery box on your Honda Ruckus now that you got rid of the stock headlights? Check this out! Fully CNC Machined Billet Aluminum, designed to make the front of the battery box stand out, and look like it was meant to be without headlights! Comes in Raw or Gloss Black Powder Coated. Stainless Hardware...
Reference: TRS-BCBL/AL
Brand: TRS
have drum brakes? want that custom look. we got you covered. billet 6160 short levers for the honda ruckus / zoomer / metropolitan. allows the use of brake lock and both switches. Choose either black or raw finish.
Reference: DIO-pip-A
Brand: Taida
Taida high quality medium volume exhaust for Honda Dio with Stroker Taida Engine. This exhaust allow to reach the full potential of your Taida stroker cylinder kit.
Reference: 31619E
Brand: Giannelli
Reverse exhausts have been developed by Giannelli R&D to offer a top-level system. The muffler is manually welded and the inner cone-shaped structure provides performance increase at higher range while keeping noise levels within European standards. Transparent paint and reversed kevlar silencer enlight the race spirit of Reverse exhausts. Depending...
Reference: BM303567
Brand: Stylepro
Standard PGO/Genuine scooters use 4-hole fan but with the stylepro racing ignition you will need 3-hole fan, here is what you need!
Reference: SCT-TS008
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with Detroit Theme.
Reference: P400099100002
Brand: Athena
High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of mechanical stresses. This aluminium cylinder is casted in steel...
Reference: 030738311
Brand: Tecnigas
Nice results with an exhaust retaining unobtrusive looks – that’s what you get with these Tecnigas exhausts. Extra torque, and top speed is about 5 mph higher.
Reference: 3216592
Brand: Malossi
Malossi offer here great performance exhaust without the inconvenience of the racing exhaust noise. This is a quite unobtrusive exhaust that looks exactly like the original but has quite some extra power and better torque. Exhaust come with restriction that can be easily removed for better performance. Great match with 50cc and 70cc Sport cylinder kit.
Reference: MF24.14003
Brand: Motoforce
A high-quality replacement piston from Motoforce available at a fair price. Suitable for original cylinders! Comes with piston rings, pin and clips.
Reference: 17245
Brand: Scootertuning.ca
High quality fabric covering. Covering the best in our range. Suitable for smaller scooters without topcase, usually with 10-inch wheels size.100% polyester fabric; Extremely tear resistant; 100% waterproof; UV stabilized and cold-stable; Heat resistant Exhaust area; Elastic and hook clamp for efficient mounting; Enhanced lock body. Include Transport bag
Reference: MF99.00501
Brand: Motoforce
A handy tool that you can easily take with you. Comes with all the common keys necessary for your scoot, sizes from 2 to 8. Key sizes: 2; 2.5; 3; 4; 5; 6; 8
Reference: NG087
Brand: NG
NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All discs are TÜV Rheinland certified and road legal and come with federal operating approval. OEM-version matches the original item, but some models may vary.
Reference: 244.110
Brand: Polini
Polini Air Speed variator pulley, great upgrade for the original due to design producing increase cooling.
Reference: TRT-C47RC1
Brand: 2Fast
2Fast High Quality Crankshaft with 47mm stroke and 100mm conrod. The perfect match with the 100cc Flanged mount cylinder on the RC-One Crankcase!
Reference: MF30.14002
Brand: Motoforce
High Compression crankshaft from Motoforce. Similar to the reinforced Motoforce crankshaft but with additional plastic padding to increase primary compression. It's actually made by the same manufacturer as the RMS, Hebo Sport crankshaft and the newest Top Performance crankshaft, the only difference being the different plastic colours and of course the...
Reference: 9931250
Brand: Top performances
The Black Trophy is Top Performance’s successor to the Trophy cylinder series. The cylinders have been modified only slightly; quality and scope of delivery are similar. The Asso piston, however, is now partly molybdenum-disulfide-coated, which improves running smoothness and performance while minimising friction and thus heat development. This set-up...
Reference: TRT-H47
Brand: 2Fast
Replacement inned cylinder head (Dome) for 2Fast 47.6mm cylinder kit.
Reference: RP003
Brand: rPRO
Designed specifically with a raised collar to fit perfectly. This is the updated version of the best adjustable clip-on bars on the market, a result from 4 years of R&D by rPRO. By trial and error, rPro have designed a product that is not only elegant in appearance, but one that is fully functional and safe.
Reference: S6-45ET004
Brand: Stage6
Stage6 R/T Screw Kit for PVL Inner Rotor Ignition Minarelli, spare part for PVL inner rotor ignition by Stage6 R/T. This is the screws needed for mounting the Stage6 R/T inner rotor ignition (PVL) for Minarelli engines (ref. S6-4516600).
Reference: S6-2016601S
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: NK200.21
Brand: Naraku
Set of 12 Naraku Gurtner main jets. Comes with 12 jets in 0.02mm increments. Set contains 50-72.
Reference: 19972
Brand: Top racing
Crankshaft in High Quality from Top Racing. The specialist Portuguese crankshaft manufacturer is a symbol of high quality crankshafts. Advanced production techniques, and over 50 years experience in both standard and racing crankshafts. Crankshaft conforms to all standards and corresponds to the original design. Compared to many Asian replicas the bearing...