No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Reference: MOT104881
Brand: Motul
Powerful biodegradable degreaser for the entire motorcycle leaves a corrosion resistant lm to protect paint, metallic components and varnished parts.
Reference: TUB225B
Brand: Yasuni
Sports exhaust system optimized for 70cc cylinders, with E-certification. Yasuni is always striving to offer the perfect product. The Yasuni R is the perfect scooter exhaust. Developed from the Yasuni Z system and perfectly adapted to 70cc sports to mid-race cylinders. A little more volume and a slightly wider cone mean greater efficiency and a more...
Reference: 0609182
Brand: Tecnigas
The Tecnigas Next-R is a well-proven and all-round exhaust for 50cc or 70cc sport cylinders. This exhaust has a good performance yield at relatively low range and sound levels. In terms of performance, the Next-R system is an improvement over the Leovince TT and, with the correct tuning, can reach over 9bhp. The Tecnigas Next-R system is delivered with...
Reference: KIT.A.139QMB.788
Brand: Naraku
Complete transmission kit of Naraku components, all tuned to another. Since Chinese-built scooters are not kitted with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any restrictors. Top speed and drivability on hills is improved, meaning higher top end and better acceleration!...
Reference: BT80005
Brand: Scootertuning.ca
Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.
Reference: FLP-003
Brand: FLP
New turn signal frame caps from FLP these only work with Honda ruckus that are not using the stock engine mount location. You will need to bridge your turn signal wires to these signals.Machined 6061 housing. Large o ring to prevent falling out with vibration. 12V dot Led amber signals
Reference: HL-001
Brand: Hotlap
Hotlap has developed a couple exclusive Honda Grom options that you cannot get anywhere else. all with that same HotLap quality. It has the signature HotLap unique bends at the header that adds a really nice look to the front of the bike but also looks really unique in general. These pipes all perform with a nice deep growl! This pipe is compatible with...
Reference: POL-KTK-CP175
Brand: Polini
Polini CP Carburetor kit adapted for Kymco / PGO / Genuine intake manifold. The kit include the carb, the intake adaptor and the choke cable. We recommend to purchase a jet kit in order to adjust the carburetor with your engine. Polini CP need PWK / CP jet kit.
Reference: 31607E
Brand: Giannelli
Reverse exhausts have been developed by Giannelli R&D to offer a top-level system. The muffler is manually welded and the inner cone-shaped structure provides performance increase at higher range while keeping noise levels within European standards. Transparent paint and reversed kevlar silencer enlight the race spirit of Reverse exhausts. Depending...
Reference: 1018472
Brand: Malossi
Malossi Cylinder head cap for Aprilia SR50 Di-Tech. Attention! With the Morini engine the cap is only working with the Malossi Cylinder kit.
Reference: DD23
Brand: MVT
This is the ignition of the French Champion 2009 in the 80cc class! The Digital Direct Premium internal rotor ignitions from MVT feature an orange stator and the original water pump and fan drive at the rotor. It allows for keeping the original water pump and/or original fan. Furthermore, this is the only ignition that lets you connect an electric water...
Reference: SCT-B2000/GY
Brand: Scootertuning.ca
Keep your head warm with this Scooter Tuning Beanie!
Reference: 14131246
Brand: Airsal
Replacement gasket set for the Airsal Alu-Sport and Alu-Racing 70cc minarelli vertical.
Reference: 209.0227
Brand: Polini
This is the complete gasket set for Polini sport 50cc cylinders. Check the picture to see which gaskets are included.
Reference: EB081
Brand: Easyboost
Easyboost variator / Clutch Tool for Yamaha Tmax is the essential tool to remove / set up easily the variator / clutch of your Tmax 500 / 530 (suitable for all models). With this kit, you can change the rollers of the variator, the belt as well as the clutch and the clutch disc of your maxi scooter. The kit includes: - A multipurpose spanner to remove the...
Reference: SCT-1261280
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Screws are NOT included!
Reference: S6-5914025
Brand: Stage6
High-quality oversize racing drive belt with kevlar fibres; excellent performance and, thanks to a unique compound, very good grip. This belt has been developed by Stage6 specifically for Oversize CVT systems and is therefore a great upgrade for the Stage6 R/T CVT system, getting you ready for high-speed racing in circuit as well as sprint races!...
Reference: TRT-6003
Brand: 2Fast
Replacement inned cylinder head (Dome) for 2Fast 52mm cylinder kit.
Reference: 166.0074/E
Brand: Polini
The new Polini Evolution is an ideal choice for motor enthusiasts looking to enhance their MINARELLI vertical engine. Made from ductile cast iron, this cylinder offers superior strength and durability, ensuring high performance even in the most demanding conditions. With a diameter of 47.0 mm and equipped with two rings on the piston, this component is...
Reference: S6-14616604
Brand: Stage6
The range of Stage6 R/T suspension components also includes these R/T Replica shock absorbers, which have proved their worth in various racing series and are available for a fair price. Just like its "bigger brother", the R/T Replica shock absorber comes with adjustment of spring preload (via anodised knurled nut) and bump stage (at the lower mount)....
Reference: S410210200059
Brand: Athena
Athena has designed a complete range of air filters for Off-Road ATV, and scooters that are manufactured by using open cells polyurethane. These high quality air filters guarantee a perfect filtering combined with an excellent air flow in each condition of use. Made in Italy.
Reference: 203.0164
Brand: Polini
The Evolution air filter is designed to match the Polini Evolution CP carburettor. Its large filtering surface ensures high airflow. Union size is 60mm, and with the filter adapters available separately, it can be fitted to all CP carbs.
Reference: P400000680017
Brand: Athena
Athena offers a 24mm PWK carburetor suitable as a universal replacement for all motorcycles. Even the most demanding user will therefore be able to achieve the perfect combination in the dosage of the air-petrol mixture at all power delivery regimes. The carburetor ensures greater acceleration and recovery in departures, also improving the draw at maximum...
Reference: SW-H36SF
Brand: Sunworld
Sunworld PWK carburettor is a very high precision carburettor. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. They have been used for several years in the race and have been proven. The carb is of course equipped with a power jet; and in order to easily find the optimal adjustment, instructions are...
Reference: 498841
Brand: Doppler
Thanks to the big experience gained on racing circuits, Doppler can propose now a new 5 mm spacer, to be placed between the crankcase and the reed valve to improve the performances of the vehicle.
Reference: 150.0603/R
Brand: Polini
70cc cast iron racing cylinder kit by Polini for scooters equipped with air-cooled Morini engines. The cylinder has a 47mm bore and achieves an output of 9.8bhp at 9,000RPM according to manufacturer.
Reference: 1CD-F1519-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F1711-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F8311-00-P0
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 93211-18800-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK102.80
Brand: Naraku
Naraku cylinder gasket set for 50cc Sport - Horizontal Kymco AC
Reference: BT22005
Brand: Scootertuning.ca
Complete lock barrel including ignition lock, seat lock, and tank cap with 2 spare keys and fixings. Suitable for all models with bodywork similar to Rex RS450, Baotian BT50QT-9, Benzhou City Star etc.
Reference: BT60002
Brand: Scootertuning.ca
Cylinder base gasket - GY6 50cc