Top sellers

• 

  CAD$ 199.99 Out of stock

  Reference: CH-1044

  Brand: Chimera

  

  High Rise Stainless Steel Headers Chimera (GY6 Fatty)

  Chimera High Rise Header for GY6 engines! The Chimera High Rise header has adequate spacing that will allow for 7" fatty, 8" fatty (depending on size of muffler) or non-fatty rear wheel set up! Will fit any GY6 150cc or 125cc engines.

  CAD$ 199.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 12.99 In stock

  Reference: FLP-013

  Brand: FLP

  

  Tapered Lug Nut Adaptor FLP Aluminium

  Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.

  CAD$ 12.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 119.99 In stock

  Reference: SCT-TT055/OR

  Brand: Scootertuning.ca

  

  Triple Tree CNC Honda Dio Orange

  CAD$ 119.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 244.99 In stock

  Reference: FLP-016

  Brand: FLP

  

  Front Light FLP Minion Eye CNC Black

  The much anticipated Minion eye is ready ! That perfect bolt on head light . Chuck out the stock candle head lights and light up road with this 7 inch led light. Kit specs : 7 inch round led with h4 wiring adapter, CNC bracket with reversible light mounts to have the light sit high or low, 3 x stand off spacers, M6 and M8 hardware, Full CNC faces no short...

  CAD$ 244.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 231.99 In stock

  Reference: FLP-015

  Brand: FLP

  

  Front Light FLP Minion Eye CNC Aluminium

  The much anticipated Minion eye is ready ! That perfect bolt on head light . Chuck out the stock candle head lights and light up road with this 7 inch led light. Kit specs : 7 inch round led with h4 wiring adapter, CNC bracket with reversible light mounts to have the light sit high or low, 3 x stand off spacers, M6 and M8 hardware, Full CNC faces no short...

  CAD$ 231.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: FLP-004

  Brand: FLP

  

  Spike Oil Cap FLP CNC Aluminium GY6 / Honda Ruckus

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 69.99 Out of stock

  Reference: TRS-SSB88/AL

  Brand: TRS

  

  Stiffer Stabilizer Bar TRS Aluminium Honda Ruckus

  Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw. T6061 Aluminum. Joint Rod Ends & nuts included

  CAD$ 69.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 183.99 In stock

  Reference: TRS-FFP320/AL

  Brand: TRS

  

  CNC Forward Foot Rest TRS Aluminium Honda Ruckus

  The TRS Eazy Rider Forward Foot Rest was made because other footrest failed. Take a close look, you can actually put your feet on the pegs!!! We extended the foot pegs and gave them a cogged end design to help with foot slippage. There are no exposed hardware, its a product that works better than others with the rider in mind. Mounted, it looks like a...

  CAD$ 183.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 61.99 Out of stock

  Reference: TRS-HLK/RE

  Brand: TRS

  

  Headlight Lowering kit TRS Bolt-On Red Honda Ruckus

  Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower, meaner stance and appearance in the front!

  CAD$ 61.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 174.99 Out of stock

  Reference: TH46ADIO50-TD001-RE

  Brand: Scootertuning.ca

  

  Exhaust Sport 70-90cc Straight Silencer Red (Dio-Elite)

  CAD$ 174.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 148.99 In stock

  Reference: IP10445

  Brand: Scootertuning.ca

  

  Replacement Exhaust (Dio-Elite)

  Low-cost aftermarket exhaust, non-performance enhancing. Good fit. For those looking for a simple replacement to a damaged or defective exhaust. Looks and performs like the original, but the price is far from the original. At this price the packaging is not “grade A”. We receive the systems in plastic packaging and now and again small scratches may be...

  CAD$ 148.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 52.99 Available in 4-20 days

  Reference: 6111294

  Brand: Malossi

  

  Drive belt Malossi X-Kevlar Aprilia SR50 Morini

  Malossi usually offers excellent and well thought-out tuning parts. Unfortunately, the Kevlar fibres lead to a slipping of the drive belt especially when starting up the engine, when the transmission ratio is very low and a lot of force gets transmitted onto the rear pulleys. Using a stronger contra spring and readjusting the vario is essential....

  CAD$ 52.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 46.99 In stock

  Reference: KW20915

  Brand: Scootertuning.ca

  

  Alternator Stator Version 4 CPI-Vento-Keeway

  Complete alternator for Minarelli-based 2-stroke engines. Suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 different versions of this alternator. On this version the main connector has 3 pins and has 1 additional single wire with 2 pins. Shipped ready to install including base plate and without magneto rotor.

  CAD$ 46.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 289.99 In stock

  Reference: S6-7419501

  Brand: Stage6

  

  Cylinder Stage6 Sport Pro MKII 70cc Cpi-Vento-Keeway (12mm)

  The Stage6 Sport Pro 70cc aluminium cylinder is a good and affordable cylinder that has been popular with many tuners – and now Stage6, with their new Sport Pro MKII, are taking thing one step further. A completely new design incl. new transfer ports cater for 2 hp more, which with the right components results in 15–17 hp right out of the box. The...

  CAD$ 289.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 Available in 4-20 days

  Reference: 209.0389/E

  Brand: Polini

  

  Gasket set Polini Sport / Corsa / Evo 70cc Piaggio AC

  Here is the complete gasket set for Polini sport and evo 70cc cylinders. Check the picture to see which gaskets are included.

  CAD$ 16.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 25.99 In stock

  Reference: 209.0414

  Brand: Polini

  

  Gasket set Polini evolution 50cc Minarelli Horizontal LC

  This is the complete gasket set for 50cc Polini Evolution racing cylinder kit. Check the picture to see which gaskets are included.

  CAD$ 25.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 57.99 In stock

  Reference: GY16726

  Brand: Scootertuning.ca

  

  Remplacement Clutch GY6 125-150cc

  Jumpy drive and bad power transfer are usually signs that the clutch plates are either worn or glazed. The only solution is to change the plates. When servicing, it is a good rule to change the complete clutch, as the clutch body needs to be disassembled, to give access to the plates. Complete Asian-designed clutch. Supplied as shown and without clutch bell.

  CAD$ 57.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: STR-697.10/BK

  Brand: Str8

  

  Halogen Light Str8 Black

  If you want more light, better vision and visibility and more safety, try this STR8 Halogen Headlight black. It is an additional lamp that is connected to your 12V battery.

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: BZT30540

  Brand: Buzzetti

  

  Hand Impact Driver Buzzetti incl. Bits

  This Buzzetti hand impact driver allows you to loosen stubborn screws and nuts. The direction of the impact driver can be also be reversed. Comes with 6 bits (3x Phillips, 1x slot, 1x 6mm and 1x 8mm hex head).

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 129.99 In stock

  Reference: WB-5070

  Brand: Buzzetti

  

  Crankshaft Bearing Puller Buzzetti

  This is an indispensable tool that you will need when taking off main bearings without damaging the intact crankshaft. It is definitely a must-have with racing set-ups, where the main bearings have to be replaced more often in order to prevent subsequent damage.

  CAD$ 129.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 86.99 In stock

  Reference: MF99.00140

  Brand: Motoforce

  

  Compression Tester Motoforce M14/M18

  If you want to check whether your cylinder still has the ideal compression (and therefore performance), simply screw in the adaptor in place of the spark plug.

  CAD$ 86.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 44.99 Out of stock

  Reference: NG107

  Brand: NG

  

  Front Brake Disc NG (Aerox-Nitro-CPI-Keeway)

  NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All discs are TÜV Rheinland certified and road legal and come with federal operating approval. OEM-version matches the original item, but some models may vary. Road approved by German Federal Motor Transport...

  CAD$ 44.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 799.99 Out of stock

  Reference: SCT-1261275

  Brand: Ruckhouse

  

  Wheel Set Ruckhouse Supermesh (12x6-12x4)

  Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.

  CAD$ 799.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 69.99 In stock

  Reference: 25773

  Brand: Scootertuning.ca

  

  Rear Brake Caliper Black (Piaggio)

  Brake caliper (mounts on bottom: Heng Tong) for various Derbi, Gilera, Piaggio and Vespa scooters. Supplied with pads. Check image prior to ordering. Item pictured is the item delivered.

  CAD$ 69.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 57.99 Out of stock

  Reference: KO-BA024B00

  Brand: Koso

  

  Voltmeter Koso Slim

  Elegant and stylish KOSO voltmeter. The Slim Style gives this a classy style and the compact construction allows for attaching this practically wherever you want. Digits are glowing bright blue! 56.4x27x11.6mm

  CAD$ 57.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 59.99 In stock

  Reference: VC18478

  Brand: Scootertuning.ca

  

  key Ignition Switch (Aprilia SR50)

  Complete igntion lock set for Aprilia SR50 Funmaster, Racing, Sport and Street. Excellent quality and price making this a perfect choice from the usually expensive OEM parts. This lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.

  CAD$ 59.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 359.99 In stock

  Reference: 9921640

  Brand: Top performances

  

  Cylinder kit TPR RACING 70cc 10mm Minarelli Vertical

  Newest evolution step from Top Performances. While the DuePlus cylinder has been made of grey cast iron, they now have decided to build the TPR series in aluminium. The LC version is equipped with the modular head of the DuePlus. The TPR cylinders have a bridged exhaust port and are situated in the upper mid-race area, yielding about 10-14 hp. (10mm...

  CAD$ 359.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 259.99 In stock

  Reference: 5717217

  Brand: Malossi

  

  Engine Cover Malossi Air Force (Piaggio)

  The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force, the new engine crankcase compatible with C-One, RC-One and the original Piaggio extended crankcase. It's called Air Force because its strength lies in the ability of simultaneously allowing entry of a greater mass of air, channelling it precisely on the...

  CAD$ 259.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 129.99 In stock

  Reference: 6714775

  Brand: Malossi

  

  Secondary gear kit Malossi 14/43 Minarelli

  Secondary gear for Aprilia, Benelli, CPI, Italjet, Malaguti, MBK, Yamaha from heritage brand Malossi.

  CAD$ 129.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 239.99 In stock

  Reference: 210.0048/12

  Brand: Polini

  

  Crankshaft Polini For Race 12mm Minarelli Horizontal

  The Polini FOR RACE crankshafts are developed to increase the resistance. The rod has been increased and strengthened to better stand powerfull engines. They are perfectly equilibrated to reduce both the vibrations and the losses of power and they are heat-treated to improve the quality of resistance. Safe and reliable, their assembly is recommended both...

  CAD$ 239.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 319.99 Available in 4-20 days

  Reference: 3216583

  Brand: Malossi

  

  Exhaust Malossi Wild Lion Minarelli Horizontal LC

  Malossi offer here great performance exhaust without the inconvenience of the racing exhaust noise. This is a quite unobtrusive exhaust that looks exactly like the original but has quite some extra power and better torque. Exhaust come with restriction that can be easily removed for better performance. Great match with 50cc and 70cc Sport cylinder kit.

  CAD$ 319.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 3.99 In stock

  Reference: 4VP-F3418-00-00

  Brand: Yamaha

  

  Fork Bearing Locking washer (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 3.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 299.99 CAD$ 499.99 -40% Out of stock

  Reference: 5DA-1410A-01-00

  Brand: Yamaha

  

  Electric Choke (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 299.99 CAD$ 499.99 -40%

  Add to cart More

  Reduced price!

  Out of stock

  Add to Compare
• 

  CAD$ 31.99 In stock

  Reference: 1CD-F1741-00-EY

  Brand: Yamaha

  

  Tail Cover Heat Red (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 31.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 Out of stock

  Reference: 1CD-F1721-00-P1

  Brand: Yamaha

  

  Left Side Cover Blue Metallic (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 42.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 11.99 In stock

  Reference: 99001-08600-00

  Brand: Yamaha

  

  Center Stand Pin Circlip (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 11.99

  Add to cart More

  In stock

  Add to Compare