No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Led Indicator relay Plug & Play for BWS/Zuma 02-11
Replacement gasket for Polini Evolution cylinder
Oil and water resistant cover with Polini logo suitable for many air...
150cc 4-Stroke Long-Case GY6 Gas...
Reference: 1CD-H3310-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 8350A-GS7-000/OR
Brand: Scootertuning.ca
Reference: BZA30270
Brand: Buzzetti
Replacement center stand from Italian manufacturer Buzzetti for Aprilia SR 50, Derbi GP1, Gilera Ice, Runner, Stalker, Storm and Piaggio NRG scooters with 50cc 2-stroke Piaggio engine. The main stand is supplied with required fixings as shown in product image.
Reference: NK160.65
Brand: Naraku
Top quality Naraku engine gasket set. Precise and durable. Made in Italy. Complete gasket set. Delivery as shown. Contains all relevant engine gaskets. Oil seals need to be purchased separately.
Reference: 14320246
Brand: Airsal
Airsal Sport cylinder gasket set - Hyosung SF50
Reference: 1200-1271
Brand: NCY
NCY QMB139 upgear kit for your 50cc 4-strokes is finally here! This kit is made specifically for 88cc big bored engines and increases your gear ratio by 30%. This is the mother of all upgears for the 50cc qmb139 scoots. Only effective if you have a full blown 88cc kit with a big valve head, and stroker crank.
Reference: 1200-1171
Brand: NCY
This Super Trans Kit is one of the best dollar-for-dollar bolt-ons to improve your scooter! It gives you quicker accelleration, higher top speeds, and makes your CVT the smoothest operating trans around! From rapid down shifting to slow cruising, this thing is smooth. Ultralight balanced components, oversized wear pads, and state of the art PTFE coatings...
Reference: NK900.99
Brand: Naraku
Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...
Reference: GY6-CHAIN-92
Brand: Taida
Taida Extended timing chain (92 links).
Reference: GY14632
Brand: Scootertuning.ca
Complete timing chain tensioner suitable for 125/150cc GY6 Chinese-built 4-stroke engines. Delivery includes tensioner tool, which is only to be used for installation purposes.
Reference: NK500.03
Brand: Naraku
Naraku sports camshaft for original and sports cylinders. Longer valve opening time. Suitable for Chinese import 125/150cc scooters, quads etc. with GY6 engines. This is the A8 Sports version. The A14 Racing version also available. Not suitable for standard Kymco cylinder heads!
Reference: BM040002
Brand: Scootertuning.ca
Looking for get the European Genuine/PGO Big Max Style with twin headlight instead of one bigger? There is the light you need. You will need to use the twin headlight cover in conjuction. Does not fit the Canadian PGO headlight connector! The wires have to be cut and adapted.
Reference: FLP-014
Brand: FLP
Safely mount your custom 1 piece wheels and use off the shelf metric lug nuts and have them seat up properly. Don’t risk you lug nuts coming loose with minimal surface contact on your flat faces wheels. Specs : 4 pieces 6061 washers, Made for M12 stud, 60 degree taper to fit all metric lug nuts.
Reference: 1100-1418
Brand: Scootertuning.ca
Custom Big Bore Engine Cases for GY6 150 Long Engine. We machine these in matched pairs ourselves! They are bored to fit up to a 63mm Performance Cylinder Kit. Go big. Cases are matched Right side and Left side, and stamped with a serial number to make sure you have a perfectly matched set. Check out the following Cylinder Kits that will work with these...
Reference: TRS-SSB88/BK
Brand: TRS
Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw. T6061 Aluminum. Joint Rod Ends & nuts included
Reference: S6-7214043
Brand: Stage6
With the 70cc Streetrace grey cast iron cylinder series, Stage6 offers a more economical alternative to the popular SportPro Aluminium cylinder. The transfer port layout has been adopted from the high-performing 70cc SportPro, but slightly modified in order to fulfil the thermal demands of the cast iron cylinder. Stage6 has gone for a piston manufactured...
Reference: 0307366
Brand: Tecnigas
Nice results with an exhaust retaining unobtrusive looks – that’s what you get with these Tecnigas exhausts. Extra torque, and top speed is about 5 mph higher.
Reference: KW20957
Brand: Scootertuning.ca
Magneto rotor for Minarelli-based 2-stroke engines. Also suitable for, among others, Keeway, CPI Generic, Longjia, Mawi etc. There are currently 3 versions of the alternator, but only one magneto rotor.
Reference: S6-3314001/RB
Brand: Stage6
High quality rubber intake manifold from Stage6 for all Piaggio engines. With its fitting diameter of 30mm, it is a perfect match for the Stage6 TM 24 carburetor kit.
Reference: MOS005594HAM
Brand: Most
Replacement piston for Most Wicked 70cc Cylinder kit.
Reference: 204.0090
Brand: Polini
Replacement piston for Polini Sport 70cc cylinder kits. Attention! Only for Polini Sport 70cc 12mm CPI (46mm).. this piston is not compatible with Polini Sport 10mm (47,6mm)
Reference: 1200-1156.10
Brand: NCY
Top-Shelf quality hand-made drive face by NCY for GY6 QMI(125cc) & QMJ(150cc) engines. This drive face is a MUST when upgrading your CVT components!
Reference: A366599
Brand: Scootertuning.ca
Reference: S410210200012
Brand: Athena
Athena has designed a complete range of air filters for Off-Road ATV, and scooters that are manufactured by using open cells polyurethane. These high quality air filters guarantee a perfect filtering combined with an excellent air flow in each condition of use. Made in Italy.
Reference: 28828
Brand: Scootertuning.ca
Carburettor repair kit for the original carb of scooters with Minarelli and Minarelli clone (1E40QMB) engines. Set includes one 72 main jet with M6 thread and a slow jet with M4 thread.
Reference: 1CD-F1519-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-H4700-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 13P-E1191-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 64301-GAH-000/PU
Brand: Scootertuning.ca
Reference: VCR-SD420/TI
Brand: Voca
Chain VOCA Reenforced 420-136
Reference: 24-00108
Brand: Sunstar
The original Sunstar Powerdrive countershaft sprocket, used by top OEM's worldwide for nearly 60 years. Constructed using the strongest chromoly steel for max durability & reliability. Parkerized surface treatment for anti rust & anti corrosion performance. The most trusted drive sprocket by consumers & dealers in the powersports industry.
Reference: VC20198
Brand: Scootertuning.ca
Replacement taillight glass in OEM-quality for Aprilia SR 50 from 2004 to 2013. Matches the original size and dimensions. Matches OEM-No.: 8224658
Reference: RH-139
Brand: Ruckhouse
Want to clean up the look of your factory levers? This is the perfect mod to make your grom look great. These are direct bolt in levers for your master cylinder and clutch lever on your honda grom. These billet levers have adjustable settings on them for your comfort along with a nice dark black anodized finish!
Reference: 25021
Brand: Scootertuning.ca
Ignition coil with lead for all 50cc Morini engines. Matches original item. Good value for money. 2 Pins
Reference: 243.075
Brand: Polini
These Polini counterpressure springs increase pressure by 15%, making them ideal for light tuning. When the level of tune increases, so too should the strength of the springs. Variator must be calibrated if springs are changed. Original Spring Loading: 45/31.5mm/kg - Polini Spring Loading: 45/37mm/kg - Spring Thickness: 4.1mm - Spring Length: 115mm -...