Top sellers

• 

  CAD$ 18.99 In stock

  Reference: MOT107318

  Brand: Motul

  

  Motul 4T Oil 3000 20W50 Mineral (1L)

  Petroleum Based oil • Formula especially reinforced with extreme pressure additives for gearbox • High lubricating properties which decrease friction and wear and increase engine lifetime • High detergent and dispersive properties • Meets JASO MA • Standards: API SG

  CAD$ 18.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 86.99 In stock

  Reference: 1200-1271

  Brand: NCY

  

  Secondary Gear Kit NCY 17/41 for GY6 139QMB/QMA

  NCY QMB139 upgear kit for your 50cc 4-strokes is finally here! This kit is made specifically for 88cc big bored engines and increases your gear ratio by 30%. This is the mother of all upgears for the 50cc qmb139 scoots. Only effective if you have a full blown 88cc kit with a big valve head, and stroker crank.

  CAD$ 86.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 127.99 In stock

  Reference: NK900.53

  Brand: Naraku

  

  Torque driver Naraku Sport for GY6 50cc

  Naraku Torque Driver with 2 different linear guide slots. Most torque drivers have curved slots which is not ideal for performance gains but fine for ridability. The 2 different linear options mean you can give more emphasis to acceleration. This is more a feature for the race track but can give the everyday commuter improved drive with no loss of...

  CAD$ 127.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 149.99 Available in 4-20 days

  Reference: 0307045

  Brand: Tecnigas

  

  Exhaust Tecnigas Silent Pro Piaggio 4T (2V)

  4-stroke exhaust system from Tecnigas. Fits all scooters with 50cc 4-stroke Piaggio engines. The exhaust has performance similar to the Tecno Straight and a good fit . Original look, low sound. Supplied without E-certification.

  CAD$ 149.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 73.99 In stock

  Reference: GY6-gear1637

  Brand: Taida

  

  Secondary Gear Kit Taida 16/37 +25% for GY6 125-150cc

  Taida gears set longer by 25% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number...

  CAD$ 73.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: NK900.98

  Brand: Naraku

  

  Secondary Gear kit Naraku 16/37 +25% for GY6 125-150cc

  Fitting a big bore kit does not always give the expected increased top end speed, it certainly improves acceleration well but not top end speed, Why? This often down the short gear ratios on your scooter, so if you find this is the case, the only way to combat this is by changing the gears to new longer ones. Here we have alonger version of the gears from...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 579.99 In stock

  Reference: 3219560

  Brand: Malossi

  

  Exhaust Malossi MHR Team Testa Rossa 94cc (C / RC-One)

  These Malossi exhausts have been specially developed for the 94cc Testa Rossa cylinders. Expansion chamber in clear finish with beautifully milled and blue anodised rear silencer made of aluminium; definitely characteristic of the Malossi MHR series.

  CAD$ 579.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 34.99 In stock

  Reference: BM04171

  Brand: Scootertuning.ca

  

  Tail Light & Indicator Light Lens Clear PGO Bigmax

  CAD$ 34.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 74.99 Out of stock

  Reference: SCT-CVK24

  Brand: Scootertuning.ca

  

  Carburetor CVK 24mm HQ

  Complete replacement 24mm carburettor (membrane type) supplied with electric auto choke. Ready to fit and suitable for 125/150cc Chinese-built engines and 125cc air-cooled Kymco models. This is a Chinese-built carb and matches the quality of the original item. Uses M5 main jets.

  CAD$ 74.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 184.99 In stock

  Reference: 1100-1418

  Brand: Scootertuning.ca

  

  Bored Crankcase GY6 180cc Long Case (54mm spacing)

  Custom Big Bore Engine Cases for GY6 150 Long Engine. We machine these in matched pairs ourselves! They are bored to fit up to a 63mm Performance Cylinder Kit. Go big. Cases are matched Right side and Left side, and stamped with a serial number to make sure you have a perfectly matched set. Check out the following Cylinder Kits that will work with these...

  CAD$ 184.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 74.99 In stock

  Reference: TRS-SSB88/BK

  Brand: TRS

  

  Stiffer Stabilizer Bar TRS Black Honda Ruckus

  Stabilizes the seam where the main frame meets the rear frame. Made in the USA. Billet T6061 Comes in black or raw. T6061 Aluminum. Joint Rod Ends & nuts included

  CAD$ 74.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 27.99 In stock

  Reference: VC31160

  Brand: Scootertuning.ca

  

  Replacement Drive Belt (Piaggio Short 4T)

  Good quality replacement drive belt for Piaggio ZIP 2, ZIP 4T, Vespa ET2, LX, LXV, S50 and Vespa S50 4 stroke scooters. Dimensions: 740*19.5

  CAD$ 27.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 In stock

  Reference: S6-3314001/RB

  Brand: Stage6

  

  Intake manifold Stage6 30mm Piaggio

  High quality rubber intake manifold from Stage6 for all Piaggio engines. With its fitting diameter of 30mm, it is a perfect match for the Stage6 TM 24 carburetor kit.

  CAD$ 42.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 51.99 In stock

  Reference: 06131046

  Brand: Airsal

  

  Piston Airsal Sport 70cc Minarelli Horizontal (Air cooled)

  Replacement piston for the Airsal Alu-Sport 70cc cylinder kit minarelli horizontal air cooled.

  CAD$ 51.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 109.99 In stock

  Reference: MOS005592HAM

  Brand: Most

  

  Piston Most Wicked 10mm Minarelli Vertical

  Replacement piston for Most Wicked 70cc Cylinder kit.

  CAD$ 109.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 63.99 In stock

  Reference: MF99.20163

  Brand: Motoforce

  

  Digital Multimeter DM-312, Motoforce, 18 measuring range

  This digital multimeter from Motoforce measures current, voltage, resistance and battery voltage. It can test diodes and be used for continuity testing. Thanks to its rubber sleeve, the multimeter is shockproof and after 15 minutes, it is automatically switched off. The instruments' features include: a rotary switch for 18 measuring ranges,10A...

  CAD$ 63.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 66.99 In stock

  Reference: 6011651

  Brand: Malossi

  

  Puller for inner rotor, for all Selettra inner rotor ignitions

  Special tool to extract rotors of internal rotor ignitions from Italkit, Polini and Malossi. Extraction is a piece of cake thanks to the ample contact surface, which prevents slipping and jamming.

  CAD$ 66.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 799.99 In stock

  Reference: SCT-1261280

  Brand: Ruckhouse

  

  Wheel Set Ruckhouse 8-Spoke V2 (12x6-12x4)

  Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Screws are NOT included!

  CAD$ 799.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 479.99 In stock

  Reference: 318398

  Brand: Malossi

  

  Cylinder kit Malossi MHR 70cc Piaggio

  Malossi's most powerful cylinder for the public (ok, there is the MHR team, which costs an arm and a leg). Bore 47.6mm, power up to 20-21bhp. 6 transfer ports.

  CAD$ 479.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 349.99 Out of stock

  Reference: 31603E

  Brand: Giannelli

  

  Exhaust Giannelli Reverse Minarelli Vertical

  Reverse exhausts have been developed by Giannelli R&D to offer a top-level system. The muffler is manually welded and the inner cone-shaped structure provides performance increase at higher range while keeping noise levels within European standards. Transparent paint and reversed kevlar silencer enlight the race spirit of Reverse exhausts. Depending...

  CAD$ 349.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 249.99 Out of stock

  Reference: P400000680017

  Brand: Athena

  

  Carburetor Athena Racing PWK 24mm

  Athena offers a 24mm PWK carburetor suitable as a universal replacement for all motorcycles. Even the most demanding user will therefore be able to achieve the perfect combination in the dosage of the air-petrol mixture at all power delivery regimes. The carburetor ensures greater acceleration and recovery in departures, also improving the draw at maximum...

  CAD$ 249.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: 343.0007

  Brand: Polini

  

  Polini CP 17.5 - 19mm Iddle Adjustment Screw

  Replacement parts for Polini CP carbs only.

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 209.99 Out of stock

  Reference: 4WX-W1512-00-00

  Brand: Yamaha

  

  Crankcase Ignition Side (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts. Please check for fitment before mounting the crankshaft. Both cases are normally machined together, so this half might not work on an engine built a couple years ago. 

  CAD$ 209.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 36.99 In stock

  Reference: 1CD-F1519-00-00

  Brand: Yamaha

  

  Front Side Cover Black (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 36.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 42.99 Out of stock

  Reference: 1CD-F1731-00-EY

  Brand: Yamaha

  

  Right Side Cover Heat Red (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 42.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 62.99 Out of stock

  Reference: 1CD-F1721-00-P2

  Brand: Yamaha

  

  Left Side Cover White Metallic (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 62.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 81.99 In stock

  Reference: 64301-GAH-000/RE

  Brand: Scootertuning.ca

  

  Front Cover Honda Dio Red

  CAD$ 81.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 81.99 In stock

  Reference: 64301-GAH-000/PU

  Brand: Scootertuning.ca

  

  Front Cover Honda Dio Purple

  CAD$ 81.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 67.99 In stock

  Reference: VC20606

  Brand: Scootertuning.ca

  

  Tail Light Lexus Style CPI-Keeway-Vento

  Replacement taillight for CPI Freaky, Aragon and Aragon GP scooters. Taillight matches the original item.

  CAD$ 67.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 219.99 In stock

  Reference: S4075

  Brand: Leovince

  

  Exhaust Leovince TT (Piaggio Injection)

  LeoVince offers the old Handmade Z as an inexpensive eco version under the name Handmade TT. Like most of their exhausts, this one also is used best with sport 50cc cylinders. Comes with aluminium silencer, and for many models with homologation. the weight of the included roller is 4.8g.

  CAD$ 219.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 94.99 Out of stock

  Reference: DIO50-030

  Brand: Taida

  

  Crankshaft Taida Original 41.4mm stroke (AF16)

  Replacement Honda Dio AF16 crankshaft made my Taida.

  CAD$ 94.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 43.99 In stock

  Reference: KW14436

  Brand: Scootertuning.ca

  

  CDI Unit Restricted (CPI-Vento-Keeway)

  Replacement CDI ignition box fits for Keeway, CPI and Generic models from 2003 on with Euro 2 exhaust certification. For added assurance, compare original to the item pictured.

  CAD$ 43.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 In stock

  Reference: MOT112948

  Brand: Motul

  

  Fork Oil Motul Expert 20W (1L)

  Hydraulic Fluid for any telescopic fork. 4 Viscosities: Light-Medium-Medium/Heavy-Heavy. Contains an Anti-Friction additive developed by Motul, making easier sliding, avoiding drag in the fork • Stable absorbing in an extended range of temperature • Protection of seals: excellent oil/ elastomer compatibility. Anti wear, anti corrosion, anti foaming

  CAD$ 21.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: BT13960

  Brand: Scootertuning.ca

  

  Rubber engine hanger for GY6 139QMB/QMA

  Rubber thrust bearing for engine mounts. This version mounts to the flat thrust bearing on the mount.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 279.99 Out of stock

  Reference: NK400.01

  Brand: Naraku

  

  Exhaust Naraku Crossover Black/Carbon GY6 50cc

  The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks to E-certification . Most 4-stroke exhausts are just borrowed from 2-stroke series and only the brackets have been altered. The result is a visually appealing system, generally with poorer performance than the...

  CAD$ 279.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 113.99 In stock

  Reference: GY650-01050

  Brand: Taida

  

  Cylinder kit Taida 81cc (50mm) GY6 50cc

  Taida High Quality 81cc (50mm) Cylinder kit for GY6 50cc engine. This kit allow to will give you a good power increase with good reliability. Available it 50mm (81cc) and 52mm (88cc).

  CAD$ 113.99

  Add to cart More

  In stock

  Add to Compare