No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Reference: BT14783
Brand: Scootertuning.ca
Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 22 tooth version. This gear has 47 teeth.
Reference: BT10004
Brand: Scootertuning.ca
Fan Wheel for air cooling. This item sits on the alternator rotor.
Reference: HL-002
Brand: Hotlap
All pipes are handmade in Japan by HotLap. The headers and exhaust canisters are built specifically for the Honda Ruckus and built from scratch. They are not reworked headers/pipes like some of the competitors’ options. Very clean with beautiful welds; everything is bent to perfection (no pie cuts to go cracking on you!). Also note every pipe comes with a...
Reference: GY6-studs-218/225-4V
Brand: Taida
Taida Extended cylinder studs (218/225). Set of 4 studs.
Reference: GY6-02054-30.5/26.5
Brand: Taida
2V Performance Taida head with larger 30.5/26.5 valves and improved oversize intake / exhaust port. This cylinder head fits the Taida cylinder kit [150-205cc] for GY6 125/150cc engines (scooters, quads and buggies) To increase performance we suggest a performance camshaft. This cylinder head is made for engine with 54mm spacing (standard GY6 engine)
Reference: TRS-SSC31/AL
Brand: TRS
Hide that Ugly Starter with our TRS Stainless Steel GY6 Starter Motor Cover comes in a finish but can be easily polished or painted to match your scooter or Powdercoated High gloss Black ! Comes with stainless hardware and aluminum spacers.
Reference: IP15427
Brand: Scootertuning.ca
Oil filler plug for Kymco, GY6 50/125/150cc – Silver
Reference: 170.0299
Brand: Polini
Polini reinforced transmission cover, ideal for tuning above 70cc. The standard cover allows the gearshaft to sit in a recess and is only lubricated by the gearbox oil. This item has a ball bearing and needle bearing set up and massively reduces the amount of friction. The following bearings are fitted to the transmission cover: Suitable for Piaggio...
Reference: 5312582
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. The higher primary compression leads to a better charge, which moves the power band up the rpm range. Slightly weaker acceleration but more power are the results.
Reference: NK400.09
Brand: Naraku
The homologated Naraku Traffic system combines a modern, fresh design with pleasant sound. This design adapts wonderfully to new outfits of modern scoots. Even when combined with current futuristic bodies, it doesn't seem oldfashioned and is thus more than just an inexpensive replacement exhaust. The Naraku Traffic offers more than good looks, though....
Reference: S6-7419502
Brand: Stage6
The successor of the popular Stage6 70cc Racing cylinder is called Stage6 Racing MKII 70cc. It has been completely revised and has 1hp more out of the box. Re-designed aluminium cylinder with high-strength hardchrome coating. The former flat piston has been abandoned in favour of an R/T replica with 0.8mm ring and domed crown. The thermal stability has...
Reference: 254.0124
Brand: Polini
This is set of gasket for stage6 cylinder with different size for the base (0.05; 0.10; 0.15; 0.20mm)
Reference: T9921540
Brand: Top performances
Reference: 200.0407
Brand: Polini
Polini Team 4 exhaust for Minarelli Horizontal engine. An exhaust that give very good performance with 70cc cast iron cylinder kit. The performances are interesting in combination with 17.5mm carb. Comes with an aluminum silencer last Genration black and longer than the former to reduce the noise.
Reference: 318463
Brand: Malossi
The MHR Replica is a 70cc aluminium racing cylinder comparable in performance to Polini Corsa. As the MHR Replica is made of aluminium, which dissipates heat better than cast-iron, it has much better thermal properties than the Corsa though. In order to ensure sufficient inner cooling and to achieve good performance, we recommend at least a 17.5mm carb....
Reference: KO-KI001R11
Brand: Koso
Temperature sensors allow to measure the cylinder temperature of air-cooled engines via the Koso Pro Multimeter. Ring simply bolts under the sparkplug. Comes with 5 replacement rings.
Reference: 4320-1191
Brand: Factory Effex
Factory Effex Sticker Sheet features 13"x19" 4mil vinyl sheet of stickers.
Reference: SCT-RB088/BK
Brand: Scootertuning.ca
Reference: 365130
Brand: Doppler
Doppler's S3R Racing reed valves are not much different from the well-known S2R series. The construction and the increased intake diameter ensure excellent air flow. The only difference is that the S3R valves come with carbon reeds.
Reference: S6-9516808
Brand: Stage6
The Stage6 R14000 is the Stage6 exhaust with the best performance. Its short resonance length provides high performance in the upper rev range. Hand-welded classy exhaust for an unbeatable price. By the way: A short while ago, the manufacturer started to supply the exhaust system with a revised rear silencer. In order to ensure availability, they are,...
Reference: MF78.16609
Brand: Motoforce
The pulley is CNC machined from high quality aluminium and is suitable for tuned engines. The pulley has been reinforced to be able to transfer the engine power without any risk. In addition, the CNC machined running surface ensures clean, low vibration V-belt operation.
Reference: 343.0400
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: DEL-1502061
Brand: Dellorto
Carburetor Spring for PHVA/PHBN carburetor.
Reference: SC3788/CA
Brand: SCR Corse
Reference: TRT-DG94
Brand: 2Fast
The italian brand 2Fast in partnership with Jollymoto has developed a range of exhaust racing to match perfectly with the rolls of the brand. They are made by hand, the muffler is aluminum color. Very torquey and powerful Exhaust System.
Reference: RH-C080
Brand: Ruckhouse
Honda Grom Carbon Front Fender. Plain weave glossy finish Carbon.
Reference: 2E9-23412-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 93505-32042-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 83600-GAH-000/PU
Brand: Scootertuning.ca
Reference: 41-199
Brand: RK Chain
RK 420MXZ Heavy-Duty Chain. These lightweight gold racing chains were developed using the same advanced alloy materials and manufacturing technology as 520MXZ4. Both 420 and 428MXZ racing chains are the lightest and strongest in their class, giving you the best value-performance rating of any motocross racing chain in the world today. Made for the serious...
Reference: STR-656.00
Brand: Str8
Tail Light Adapter STR8 Easy Connect, w. indicator function, universal, ideal solution for connecting the wires of your tail light. The connecting cables come in different, easily distinguishable colours. Universal fit, including plastic sleeves and blade receptables.