No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Replacement OEM Yamaha parts.
Reference: S6-4514001
Brand: Stage6
With PVL, we have managed to find a distinguished and competent partner to develop and manufacture our ignition. PVL has supplied hardware, we have contributed the software, i.e. the two selectable ignition curves, based on years of experience in circuit and drag racing and on dyno runs.
Reference: 4320-0712
Brand: Factory Effex
Factory Effex Sticker Sheet features 13"x19" 4mil vinyl sheet of stickers.
Reference: TUN001768CAR
Brand: Tun'R
Reference: S6-SSP141/
Brand: Stage6
Oil Filler Cap Stage6 Piaggio - stylish colorful anodized oil plug for optimal sealing of the crankcase. Well-sealing oil filler screws are crucial for the operability of the gearbox. The oil plug closes the filler opening of the case, a high-quality O-ring ensures perfect sealing. The oil plugs are made of a high quality aluminium alloy (7075) and come...
Reference: 482325
Brand: Teknix
Complete Fork Teknix standard origin for Yamaha Aerox. Can be used on Bws / Zuma 2002-2011 with Aerox disc brake, caliper and mount.
Reference: 2515482
Brand: Malossi
A reinforced gear cover is essential for stronger tuned engines. In contrast to the original cover, this Malossi version is equipped with needle bearings for the intermediate shaft and the wheel shaft. The 2008 version now also fits in conjunction with Malossi Overrange torque drivers, but when being used with the Polini Evolution torque driver, it will...
Reference: 343.0008
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: SW-H40SF
Brand: Sunworld
Sunworld PWK carburettor is a very high precision carburettor. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. They have been used for several years in the race and have been proven. The carb is of course equipped with a power jet; and in order to easily find the optimal adjustment, instructions are...
Reference: 5PJ-F5872-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-H3559-00-P1
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 93310-23047-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 90201-10119-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-H3980-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 83500-GAH-000/PU
Brand: Scootertuning.ca
Reference: BM02090
Brand: Scootertuning.ca
Reference: CH-GJ-1020
Brand: Chimera
Gojin AC to DC Rectifier for Honda Grom 125! 100% plug and play! No need to de-pin any wires or anything fancy! Simply remove the stock rectifier and swap this one in!
Reference: 280.0009
Brand: Polini
The stainless-steel water pump shaft from Polini is less susceptible to leaks. In the Revision Set available here, the drive wheel is not included. Fits original Piaggio water pump and Polini Racing water pump. The Polini water pump a can also be used as high-quality spare parts in untuned Piaggio engines. Will be delivered like shown.
Reference: PI-286158
Brand: Piaggio
OEM oil pump drive gear for Piaggio 50cc 2-stroke AC or LC. Genuine Piaggio spare part.
Reference: 82652R
Brand: Piaggio
Piaggio OEM Oil pump for Piaggio injected / Purejet 50cc engines. Pump and lines pre-filled with oil allowing for smooth installation without air bubbles.
Reference: 5719367
Brand: Malossi
Malossi Air Force variator cover for Minarelli long cases ATTENTION : Does not fit the Taiwan made Minarelli horizontal engines (CANADA-USA-MEXICO) only ITALIAN MADE MINARELLI
Reference: DIO-060-CH54
Brand: Taida
Taida V2 Liquid Cooled Honda Dio 54mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with dio taida stroker crankshaft 52.6mm (120cc). Attention! Boring and machining required.
Reference: VC25529
Brand: Scootertuning.ca
Replacement drive belt for maxi-scooters with Piaggio Leader engines. Dimensions: 818-22.5
Reference: TRS-FBADK
Brand: TRS
This fender bracket allows for you to keep your oem Honda Ruckus rear fender when doing any of our TRS airbox delete kits. The bracket and hardware are included in this kit and will be a quick install. The nylock nut will go under the fender securing the fender to the bracket and then the other m6 bolt will secure the bracket to the open hole on your...
Reference: IP32433
Brand: Scootertuning.ca
Complete variator kit as shown for Kymco Agility, Like, Movie XL, People S and Super 8 125 maxi scooters. Supplied as shown with a set of 18x14 14gram rollers.
Reference: DC32306
Brand: Dayco
Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...
Reference: 27242
Brand: Scootertuning.ca
One piston brake caliper for front brake inclusive pads for China, Generic, CPI, Rieju. Red in color.
Reference: BT24031S
Brand: Scootertuning.ca
Original brake lever for front brake discs Suitable for all front disc brake designs. For added assurance, please check the image and compare with the required item.
Reference: MOT112950
Brand: Motul
Hydraulic Fluid for any telescopic fork. 4 Viscosities: Light-Medium-Medium/Heavy-Heavy. Contains an Anti-Friction additive developed by Motul, making easier sliding, avoiding drag in the fork • Stable absorbing in an extended range of temperature • Protection of seals: excellent oil/ elastomer compatibility. Anti wear, anti corrosion, anti foaming
Reference: BT16653
Brand: Scootertuning.ca
Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...
Reference: BT16644
Brand: Scootertuning.ca
Carburettor membrane with slide and adjustable carb needle. Various CVK carbs of the same basic construction are installed on 4-stroke vehicles. The differences are, for example, the use of different slide diameters. For this reason, you should measure the diameter of the original item before ordering, in order to avoid any errors. This membrane is...
Reference: GY650-020-23/20
Brand: Taida
Taida Racing Oversize Cylinder head with 21.5/19 valves. This cylinder head will allow you to reach the full potential of your big bore kit. Attention! This head work with 64mm rocker arm. Some GY6 50cc engine come with 69mm. We sell the 64mm rocker arm separately if you need them.