Top sellers

• 

  CAD$ 20.99 Out of stock

  Reference: P400485160090

  Brand: Athena

  

  Gasket set Athena Hyper Race Minarelli Vertical

  Replacement gasket set for the Athena Hyper Race 70cc cylinder kit (minarelli vertical).

  CAD$ 20.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 39.99 In stock

  Reference: T9921540

  Brand: Top performances

  

  Piston ring Top PerformancesTPR 70cc (47,6mm) Minarelli / Piaggio

  CAD$ 39.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 129.99 In stock

  Reference: TFC-011

  Brand: TFC

  

  Clutch TFC Racing GY6 125-150cc

  CAD$ 129.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 28.99 In stock

  New

  Reference: 203.0170

  Brand: Polini

  

  Air Filter dust cover Polini

  Oil and water resistant cover with Polini logo suitable for many air filters. Protects large foam filters from sand and dust. Easy and quick installation, simply pull over the filter. Perfect when riding on sandy tracks or very dry, dusty tracks. The elastic makes this air filter protector fit many filter styles. Please match the size with the...

  CAD$ 28.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 319.99 In stock

  Reference: 200.0407

  Brand: Polini

  

  Exhaust Polini Team 4 Piaggio

  Polini Team 4 exhaust for Minarelli Horizontal engine. An exhaust that give very good performance with 70cc cast iron cylinder kit. The performances are interesting in combination with 17.5mm carb. Comes with an aluminum silencer last Genration black and longer than the former to reduce the noise.

  CAD$ 319.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 469.99 In stock

  Reference: 318463

  Brand: Malossi

  

  Cylinder kit Malossi MHR Replica 70cc Piaggio

  The MHR Replica is a 70cc aluminium racing cylinder comparable in performance to Polini Corsa. As the MHR Replica is made of aluminium, which dissipates heat better than cast-iron, it has much better thermal properties than the Corsa though. In order to ensure sufficient inner cooling and to achieve good performance, we recommend at least a 17.5mm carb....

  CAD$ 469.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 51.99 In stock

  Reference: KO-KI001R11

  Brand: Koso

  

  Temperature sensor KOSO 10mm White Connector (Air Cooled)

  Temperature sensors allow to measure the cylinder temperature of air-cooled engines via the Koso Pro Multimeter. Ring simply bolts under the sparkplug. Comes with 5 replacement rings.

  CAD$ 51.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 29.99 Out of stock

  Reference: 4320-1191

  Brand: Factory Effex

  

  Sticker kit FX Metal Mulisha (A)

  Factory Effex Sticker Sheet features 13"x19" 4mil vinyl sheet of stickers.

  CAD$ 29.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 49.99 Out of stock

  Reference: SCT-RB088/BK

  Brand: Scootertuning.ca

  

  Rear Bumper Black (Bws/Zuma 2002-2011)

  CAD$ 49.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 87.99 Out of stock

  Reference: 365130

  Brand: Doppler

  

  Reed valve Doppler S3R Carbon Minarelli Vertical

  Doppler's S3R Racing reed valves are not much different from the well-known S2R series. The construction and the increased intake diameter ensure excellent air flow. The only difference is that the S3R valves come with carbon reeds.

  CAD$ 87.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 249.99 In stock

  Reference: S6-7216801

  Brand: Stage6

  

  Cylinder Kit Stage6 Streetrace 70cc 10mm Minarelli Vertical

  10mm Gudgeon pin) With the 70cc Streetrace grey cast iron cylinder series, Stage6 offers a more economical alternative to the popular SportPro Aluminium cylinder. The transfer port layout has been adopted from the high-performing 70cc SportPro, but slightly modified in order to fulfil the thermal demands of the cast iron cylinder. Stage6 has gone for a...

  CAD$ 249.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 219.99 Available in 4-20 days

  Reference: 2515482

  Brand: Malossi

  

  Gearing cover Malossi MHR 2008 Minarelli

  A reinforced gear cover is essential for stronger tuned engines. In contrast to the original cover, this Malossi version is equipped with needle bearings for the intermediate shaft and the wheel shaft. The 2008 version now also fits in conjunction with Malossi Overrange torque drivers, but when being used with the Polini Evolution torque driver, it will...

  CAD$ 219.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 113.99 In stock

  Reference: P10597

  Brand: Artek

  

  Clutch Artek K2 107mm Minarelli

  CAD$ 113.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 3.99 In stock

  Reference: DEL-1502061

  Brand: Dellorto

  

  Carburetor Spring Dellorto PHVA/PHBN

  Carburetor Spring for PHVA/PHBN carburetor.

  CAD$ 3.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 409.99 Out of stock

  Reference: SC3788/CA

  Brand: SCR Corse

  

  Exhaust SCR Corse Hand Made 70 Carbon Minarelli Horizontal

  CAD$ 409.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 45.99 In stock

  Reference: 2E9-23412-00-00

  Brand: Yamaha

  

  Upper Fork Bearing Lower Race (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 45.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 13.99 In stock

  Reference: 93505-32042-00

  Brand: Yamaha

  

  Lower Fork Bearing (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 13.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 71.99 In stock

  Reference: 83600-GAH-000/PU

  Brand: Scootertuning.ca

  

  Left Side Cover Honda Dio Purple

  CAD$ 71.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 65.99 In stock

  Reference: 41-199

  Brand: RK Chain

  

  Chain RK MXZ 420 Special Racing Gold

  RK 420MXZ Heavy-Duty Chain. These lightweight gold racing chains were developed using the same advanced alloy materials and manufacturing technology as 520MXZ4. Both 420 and 428MXZ racing chains are the lightest and strongest in their class, giving you the best value-performance rating of any motocross racing chain in the world today. Made for the serious...

  CAD$ 65.99

  More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: STR-656.00

  Brand: Str8

  

  Tail Light Easy Connect STR8

  Tail Light Adapter STR8 Easy Connect, w. indicator function, universal, ideal solution for connecting the wires of your tail light. The connecting cables come in different, easily distinguishable colours. Universal fit, including plastic sleeves and blade receptables.

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 137.99 Out of stock

  Reference: RH-184

  Brand: Ruckhouse

  

  Front Fork 2'' Lowering Spring kit Ruckhouse Aluminium (Grom)

  ***This Lowering Kit was NOT designed to use the stock bars. You will either need to install at least a 1.75″ riser and use bars with a lower rise than stock, or use our “RaceBars” handlebar setup which was designed specifically around this lowering kit!*** Its FINALLY Here! After a lot of testing of various components, the 2″ Front Fork Lowering Kit for...

  CAD$ 137.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 63.99 In stock

  Reference: IP32344

  Brand: Scootertuning.ca

  

  Regulator / Rectifire (Aprilia SR50 Piaggio)

  The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out.

  CAD$ 63.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 56.99 In stock

  Reference: 280.0008

  Brand: Polini

  

  Racing Water Pump Polini (with Gear)

  The stainless-steel water pump Polini has been specially adapted to the needs of high-speed racing engines and drive gear optimized in weight. This water pump can be removed for engines with mixed lubrication problems the original oil pump. Everything easily without tinkering. In addition, in Lieferunfang a blind plug. All in all, is for the electric...

  CAD$ 56.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 309.99 In stock

  Reference: 5719367

  Brand: Malossi

  

  Cvt Cover Malossi Air Force (Minarelli horizontal)

  Malossi Air Force variator cover for Minarelli long cases ATTENTION : Does not fit the Taiwan made Minarelli horizontal engines (CANADA-USA-MEXICO) only ITALIAN MADE MINARELLI

  CAD$ 309.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 424.99 CAD$ 499.99 -15% Out of stock

  Reference: 005-4450199

  Brand: Two Brothers Racing

  

  Exhaust Two Brothers Racing Comp Full System Z125

  Ready to bring your bike into a class of its own? TBR's background in performance is highlighted on this exhaust with horsepower and torque gains. The systems are all handcrafted in the USA with all the TIG welds being perfected by hand.

  CAD$ 424.99 CAD$ 499.99 -15%

  Add to cart More

  Reduced price!

  Out of stock

  Add to Compare
• 

  CAD$ 33.99 In stock

  Reference: NK900.03

  Brand: Naraku

  

  Drive Belt Naraku V/S (Kymco 50 4T)

  NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...

  CAD$ 33.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 27.99 Available in 4-20 days

  Reference: DC32306

  Brand: Dayco

  

  Drive Belt Dayco (Minarelli 100cc)

  Aramid reinforced belt from well respected Italian company Dayco, sister company to Pirelli. The woven aramid fibre makes this belt much more durable than standard V-belts. Dayco belts meet the highest standard and are preferably used in Maxi scooters or motor scooters with higher capacity and power however can also be used as a replacement belt and are...

  CAD$ 27.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 249.99 In stock

  Reference: 318286

  Brand: Malossi

  

  Cylinder Malossi 70cc Sport (AF34-AF35)

  Malossi Sport 70 strong torque cast iron cylinder kit with robust piston and 2 rings for the Honda Dio ZX 50 2-stroke with a horizontal cylinder. Easy to tune and original carb and exhaust system are retained. Ideal for inexperienced tuners. Supplied with all necessary mounting parts, instructions, gaskets 88 main jet (M4) etc. Original head may be retained.

  CAD$ 249.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 17.99 In stock

  Reference: BT16653

  Brand: Scootertuning.ca

  

  Kickstart Shaft (51mm/25mm) for GY6 50cc 139QMB/QMA

  Low-cost aftermarket kickstarter shaft [semi-circle], for Kymco 2- and 4-stroke 50/125cc engines. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation. **This item is suitable for all Kymco engines, as they...

  CAD$ 17.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 9.99 In stock

  Reference: BT13855

  Brand: Scootertuning.ca

  

  Oil pump driven sprocket (16 tooth) GY6 50cc 139QMB/QMA

  Oil pump and drive gear for Chinese-built 4-stroke GY6 50ccm 139QMB/QMA engines. This item fits the 16 tooth crankshaft. This gear has 33 teeth.

  CAD$ 9.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 7.99 In stock

  Reference: BT17957

  Brand: Scootertuning.ca

  

  Crankcase cover gasket 13 wheel (788mm) GY6 50cc"

  rankcase cover gasket (13”-788mm) - GY6 50cc

  CAD$ 7.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 28.99 In stock

  Reference: BT13868

  Brand: Scootertuning.ca

  

  Drive shaft clutch side for GY6 50cc 139QMB/QMA

  Gearbox input shaft for GY6 139QMB/QMA. This is where the clutch and converter pack are mounted.

  CAD$ 28.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 Out of stock

  Reference: NK102.18

  Brand: Naraku

  

  Oil seal set for Naraku Torque Driver GY6

  Naraku quality shaft seals for various Kymco, SYM and Honda scooters. Shaft seals are required on the rear of the convertor and seal in the convertor grease and protect the belt from slipping.

  CAD$ 14.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 15.99 In stock

  Reference: BT27392

  Brand: Scootertuning.ca

  

  Carburetor diaphragm 20mm round slide diameter 139QMB/QMA

  Carburettor diaphragm for original carburettors fitted to the Chinese imported 4 stroke scooters with the 139QMA/QMB. This said, there are still numerous variations and we offer all, please see part numbers BT16644, BT14345, BT16007. The main difference is the diameter of the neck that enters the carb. This version has ta 20mm diameter.

  CAD$ 15.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 47.99 Out of stock

  Reference: NK100.63

  Brand: Naraku

  

  Piston set Naraku 72cc GY6 50cc

  NARAKU replacement piston set for 47mm cylinders. The piston has a CNC-machined oil grooves for enhanced lubrication at the piston skirt. The piston skirt has a special molybdenum coating for the all-important running-in period. Suitable for 47mm V.2 NARAKU GY6 139QMB/QMA cylinder kits and Kymco 4-strokes. Delivery includes piston rings 1 and 2 oil...

  CAD$ 47.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 18.99 Out of stock

  Reference: GY6-gas63-54

  Brand: Taida

  

  Gasket Set Taida 180cc (63mm) for GY6 150cc Engine 54mm

  Taida Gasket set for 180cc cylinder kit (63mm)

  CAD$ 18.99

  Add to cart More

  Out of stock

  Add to Compare