Top sellers

• 

  CAD$ 219.99 In stock

  Reference: S6-31RT-PWK24

  Brand: Stage6

  

  Carburetor Stage6 R/T Type PWK24

  The R/T PWK carburetor is a new development from KOSO, produced exclusively for Stage6. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. The outside measurements and the size of the connection to the intake manifold have been reduced so that mounting is easier. Furthermore, the black racing finish...

  CAD$ 219.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 32.99 Out of stock

  Reference: P400485850162

  Brand: Scootertuning.ca

  

  Engine Gasket set Athena Yamaha Bws/Zuma 50cc

  Athena offers the most complete range of gaskets and gasket sets for every make and model of motorcycles, jet-ski, snow-mobiles and outboards in the world. The quality of our gaskets replaces and exceeds the seal offered by the original products. Our long time experience gained in supplying most prestigious OEM Motorcycle manufacturers, has brought to our...

  CAD$ 32.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 37.99 In stock

  Reference: 203.0114

  Brand: Polini

  

  Air filter Polini Short 30° Blue (37mm)

  We can now offer you these air filters from Polini. A splash protection that can be installed additionally, they are primarily intended for sporty use. Please remember: when using this carburettor, you will need to upjet your carb (depending on your tuning stage) or otherwise risk engine damage.

  CAD$ 37.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 53.99 In stock

  Reference: MF19.16645

  Brand: Motoforce

  

  Cylinder Motoforce Eco Quality 50cc 10mm Minarelli Horizontal

  (10mm Gudgeon pin) If you're looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.

  CAD$ 53.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 359.99 In stock

  Reference: NK100.52

  Brand: Naraku

  

  Cylinder kit Naraku V2 90cc with Head GY6 50cc 139QMB/QMA

  With the latest V.2 Cylinder kit series from NARAKU, we can offer a more advanced product. The bore has been taken out to 52.4mm. The external diameter of the cylinder base has not been affected by the increase in displacement. This means alterations to the crank cases are generally not required. As a 4 stroke cylinder is effectively just a hole, the...

  CAD$ 359.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: 348446

  Brand: Malossi

  

  Piston MHR Replica 70cc Minarelli

  Replacement piston for the mhr replica 70cc cylinder kits

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: MF60.19855

  Brand: Motoforce

  

  Variator Star washer (16mm) CPI-Vento-Keeway

  Especially where the kickstart is concerned, there should be no technical faults. In order to provide a better overview, we have divided the kickstart replacement parts into groups according to engines. Nevertheless, it may still be necessary to check sizes/dimensions with some parts, e.g. with bushes and kickstart shafts, as diameters may vary there.

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 5.99 In stock

  Reference: MF48.00030

  Brand: Motoforce

  

  Hose clamp Motoforce 32mm

  We can now also offer you Motoforce hose clamps with a maximum diameter of 22mm and 32mm. .

  CAD$ 5.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 209.99 In stock

  Reference: S6-5616634

  Brand: Stage6

  

  Variator Stage6 R/T Oversize Minarelli

  The oversize variator from Stage6 - the optimal complement to the Stage6 oversize torque driver. Bigger CVT systems are becoming essential parts for race and midrace engines, extending the whole range of transmission.The Stage6 R/T variator has revised roller curves that have been optimised for usage with R/T engines and accommodate weights in a size of...

  CAD$ 209.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 103.99 In stock

  Reference: TFC-004

  Brand: TFC

  

  Front Pulley TFC Forged

  TFC renforced front pulley for Dio/Elite. Ligtther and better than the original.

  CAD$ 103.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 8.99 In stock

  Reference: MF12.00005

  Brand: Motoforce

  

  Spark plug cable Motoforce 50cm

  High-quality spark plug connectors and cables. Both connectors have 90deg angle and are made of rubber or plastic

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 31.99 In stock

  Reference: 5PJ-F6311-00-00

  Brand: Yamaha

  

  OEM Throttle Cable 1 (Bws/Zuma 2002-2011)

  Replacement OEM Yamaha parts.

  CAD$ 31.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 21.99 Out of stock

  Reference: PWK-TC

  Brand: Taida

  

  Throttle Cable taida (Original Throttle to PWK-CP-PHBG)

  Throttle cable Taida for use PWK/PB Carburettor on 125 and 150cc GY6 engines (152/157QMI).

  CAD$ 21.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 90.99 In stock

  Reference: 0200-0005.10

  Brand: NCY

  

  Gas Tank Cover NCY White Honda Ruckus

  We can offer here the NCY tank cover made in ABS thermoplast. Great part in conjuction with a NCY or custom footrest frame. Available in White, Black, Carbon and Chrome!

  CAD$ 90.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 19.99 In stock

  Reference: S6-030105

  Brand: Stage6

  

  Air Screw Stage6 R/T (PWK)

  Idle speed adjuster screw from Stage6 for all common Dellorto VHST/PHBG/PHBL and flat-slide/PWK/Keihin carburettors. Replaces the integrated screw and allows for adjusting the mixture at idle speed within seconds without having to remove other parts first. For Stage6 Flat-Slide/PWK/Keihin

  CAD$ 19.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 In stock

  Reference: NK201.15

  Brand: Naraku

  

  Intake system Naraku Big Valve V2 23-32mm Minarelli Horizontal

  Naraku Racing Intake V.2 including 2 adapters for all common carburettors. The 23mm adapter is suitable for all Dellorto 10-21mm and Arreche 17-21mm carburettors. The 32mm adapter allows for instance the mounting of PWK carburettors with an opening of up to 30mm. Includes NBR Racing reed block and fixings. The somewhat longer design accelerates the gas...

  CAD$ 139.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 309.99 In stock

  Reference: 3216578

  Brand: Malossi

  

  Exhaust Malossi Wild Lion (Genuine / PGO)

  Malossi offer here great performance exhaust without the inconvenience of the racing exhaust noise. This is a quite unobtrusive exhaust that looks exactly like the original but has quite some extra power and better torque. Exhaust come with restriction that can be easily removed for better performance. Great match with 50cc and 70cc Sport cylinder kit.

  CAD$ 309.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 249.99 Available in 4-20 days

  Reference: 032705611

  Brand: Tecnigas

  

  Exhaust Tecnigas Original Pro Piaggio 4T (4V)

  CAD$ 249.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 11.99 In stock

  Reference: MF40.00190

  Brand: Motoforce

  

  Front Brake Pads Motoforce (Bws'r/Zuma/SR50/Typhoon/CPI)

  Good quality replacement brake pads from Motoforce.

  CAD$ 11.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 439.99 In stock

  Reference: 6112812

  Brand: Malossi

  

  Oversize CVT MHR Overrange 2005 Minarelli Short

  New version available since September 2005. This is the complete kit from the Malossi Hyper Racing (MHR) series. It consists of the complete rear pulleys (fixed and movable halves) contra spring, MHR variator, fixed half of the vario and oversize drive belt. Thanks to the larger rear-pulleys the range of transmission is increased which results in...

  CAD$ 439.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 61.99 In stock

  Reference: SCT-TLP001

  Brand: Ruckhouse

  

  Tire Low Profile xiuiang 100/60-12

  We can offer here this low profile tire that everyone use on their 12'' Ruckus front wheel!. The perfect match with the 12x4 Front wheel.

  CAD$ 61.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 349.99 In stock

  Reference: 200.0408

  Brand: Polini

  

  Exhaust System Polini Team 4 Minarelli Horizontal

  Polini Team 4 exhaust for Minarelli Horizontal engine. An exhaust that give very good performance with 70cc cast iron cylinder kit. The performances are interesting in combination with 17.5mm carb. Comes with an aluminum silencer last Genration black and longer than the former to reduce the noise.

  CAD$ 349.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 36.99 In stock

  Reference: 16287

  Brand: Scootertuning.ca

  

  Kickstart Pinion Gear (Kymco)

  Kick-starter sprocket with spring clip.

  CAD$ 36.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 81.99 In stock

  Reference: 1100-1250.10

  Brand: NCY

  

  Camshaft NCY Performance for 139QMB/QMA

  High Performance cam for 139QMB engine. Use this camshaft when upgrading cylinder and head to get the most performance from your new 72cc or 82cc kit. Intake Lobe 25.8mm – Exhaust Lobe 25.5mm

  CAD$ 81.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 93.99 Out of stock

  Reference: 5PJ-F4610-01-00

  Brand: Yamaha

  

  Gas cap Yamaha (Bws/Zuma 2002-2011)

  Remplacement Gas Cap for Yamaha Bws / Zuma 2002-2011

  CAD$ 93.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 64.99 Out of stock

  Reference: SP-R6W

  Brand: Ruckhouse

  

  Tail Light R6 Style with Bracket (Clear) Honda Ruckus

  Ruckus R6 tail light kit 100% bolt on! The tail light is DOT. Include turn signal. Hardware and mounting bracket for Honda ruckus seat include!

  CAD$ 64.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 63.89 CAD$ 70.99 -10% Product available with different options

  Reference: 0340-PI

  Brand: Pirelli

  

  Tire Pirelli Angel

  Le Pirelli Angel offre de la mobilit? urbaine Excellent confort, performances optimales sur sol mouill? et maniabilit? pour la jungle urbaine, Confort ?lev? gr?ce ? l'action combin?e de structures rigides et de la conception de la bande de roulement, Nouveau compos? , Maniabilit? urbaine dynamique gr?ce au nouveau contour multi-rayons permettant un...

  CAD$ 63.89 CAD$ 70.99 -10%

  More

  Reduced price!

  Product available with different options

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: 196313Q

  Brand: Malossi

  

  Cylinder studs Malossi HQ M7x112mm (4)

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 10.99 In stock

  Reference: 2719650

  Brand: Malossi

  

  Carbon reeds Malossi Minarelli Vertical

  Malossi carbon reeds for the original valve. Carbon reeds allow for changing the engine characteristics. Thin reeds - better acceleration. Thick reeds - better performance at high revs. Another advantage: while steel reeds can break, causing catastrophic damage to the engine's innards, this won't happen so easily with carbon reeds. 0.30 / 0.35m

  CAD$ 10.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 16.99 In stock

  Reference: KW13989

  Brand: Scootertuning.ca

  

  Spindle Comp Kickstarter (63mm/31mm)

  Low-cost aftermarket kickstarter shaft [semi-circle], for 2-stroke Minarelli-based engines such as CPI, Keeway, Mawi, Longija etc. There are different shaft lengths for different crankcase covers. To be absolutely sure, click on the item and compare the original part with the product image. We have added one photo for each variation.

  CAD$ 16.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 32.99 In stock

  Reference: MF10.20168

  Brand: Motoforce

  

  Complete Engine gasket set Motoforce Minarelli Vertical

  Inexpensive replacement gasket set from Motoforce in OEM quality. Depending on the scooter model, this includes a transmission gear cover gasket, a reed valve gasket, a complete cylinder gasket set for AC and LC as well as an engine cover gasket.

  CAD$ 32.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 8.99 In stock

  Reference: PS00822

  Brand: Scootertuning.ca

  

  Replacement Kickstart Spring (Genuine / PGO)

  Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!

  CAD$ 8.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 149.99 In stock

  Reference: S6-3316617/OR

  Brand: Stage6

  

  Intake Stage6 R/T Reverse 32mm Orange Minarelli Horizontal

  CNC-milled intake manifold with very sturdy high quality carburettor installation stud made of FKM (Viton). In combination with the Stage6 subframe, the spacer lets you directly install Stage6 R/T VHST and PWK carburettors facing the rear wheel without the carb being at a too low angle that would result in overflow. Special attention has been paid to the...

  CAD$ 149.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 249.99 In stock

  Reference: 319987

  Brand: Malossi

  

  Cylinder Kit Malossi Sport 70cc (Kymco)

  With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you’ll get an easy-to-adjust, strong sport cylinder. It...

  CAD$ 249.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 In stock

  Reference: SCT-TM002

  Brand: Scootertuning.ca

  

  Replacement sensor for air cooled engine (14mm)

  Replacement sensor for the thermometer unit.

  CAD$ 14.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 25.99 In stock

  Reference: S6-9700

  Brand: Stage6

  

  Silencer Packing Material Stage6 Super-Silent

  The Super-Silent packing material from Stage6 is a high-quality racing exhaust packing wool with great damping and temperature resistant properties. For noise reduction and longevity of the packing material, quantity (and therefore density) is of prior importance. The wool does not come as one firm mat, so you can extract exactly as much wool as you need,...

  CAD$ 25.99

  Add to cart More

  In stock

  Add to Compare