No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
150cc 4-Stroke Long-Case GY6 Gas...
Reference: PS00822
Brand: Scootertuning.ca
Looking for replacement kickstart parts for PGO and Genuine? We offer wide selection of replacement parts!
Reference: RH-173
Brand: Ruckhouse
Complete Front Hub for Honda Ruckus with Ruckhouse brake disc adaptor. Installation Note: When putting the center axle, some of these are not fitting due to the center bar inside the hub being a hair too small. Hitting the axle with a hammer will knock out bearing. Remove center piece and reinstall bearing. This piece is not needed anyways.
Reference: MF88.89001
Brand: Motoforce
We can offer high-quality replacement shock absorbers from Motoforce. Attention: The shock absorber length of scooter models may vary; this shock absorber has a length of 28cm. Variations of +/-2.0cm can be installed without any problems.
Reference: S6-9700
Brand: Stage6
The Super-Silent packing material from Stage6 is a high-quality racing exhaust packing wool with great damping and temperature resistant properties. For noise reduction and longevity of the packing material, quantity (and therefore density) is of prior importance. The wool does not come as one firm mat, so you can extract exactly as much wool as you need,...
Reference: SCT-BD012/RE
Brand: Scootertuning.ca
We offer here TWPO 220mm brake disc, the perfect brake disc in conjuction with TRS front hub and NCY, RRGS or lowdown Ruckus fork.
Reference: 5PJ-F4610-01-00
Brand: Yamaha
Remplacement Gas Cap for Yamaha Bws / Zuma 2002-2011
Reference: SP-R6W
Brand: Ruckhouse
Ruckus R6 tail light kit 100% bolt on! The tail light is DOT. Include turn signal. Hardware and mounting bracket for Honda ruckus seat include!
Reference: SCT-TM002
Brand: Scootertuning.ca
Replacement sensor for the thermometer unit.
Reference: IP32380
Brand: Scootertuning.ca
Replacement rectifier regulator as shown in image. The rectifier controls and changes the AC voltage generated by the alternator used in the electrical system to 12v DC voltage within a certain tolerance to ensure the battery receives is charge and also ensure the bulbs do not burn out
Reference: CY00245
Brand: Scootertuning.ca
Replacement Nut for Variator and Ignition for PGO and Genuine scooter.
Reference: TH38ADIO-04
Brand: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: 319987
Brand: Malossi
With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you’ll get an easy-to-adjust, strong sport cylinder. It...
Reference: MF99.00069
Brand: Motoforce
Special tool to lock the front pulley for quick and easy dismantling of the variator. No serious tuner should be without one.
Reference: W460.6..10
Brand: Wurth
Crush/Seal washer for most H2O cylinder heads.
Reference: STR-500.51/
Brand: Str8
The water pump cover "EXTREM CUT" comes complete with impeller and lets you show what's inside your engine. The big cut-outs are tidily done and give this part a unique style. Installing some LEDs would be an interesting idea here, and in combination with a polished or chrome-plated engine, this would also work just fine. The cover is available in black,...
Reference: 7719117
Brand: Malossi
This Wing Bell design was developed by Malossi. The outer cooling ribs give more form stability so that distortions and unbalances can be prevented. Furthermore, it cools the bell down by about 70deg Celsius. Using the wing bell contributes to a longer life of the clutch and a reduction in clutch slip due to a hot engine. Performance can be better...
Reference: 2013224
Brand: Malossi
Thanks to the big experience gained on racing circuits, Malossi can propose now a new 5 mm spacer, to be placed between the crankcase and the reed valve to improve the performances of the vehicle.
Reference: ADL-BCM02118B
Brand: Adelin
Adelin caliper mount for Adelin, Stage6 & Voca 4-piston brake caliper. This part allow to use 4-piston caliper on Bws/Zuma 2002-2011 with the original fork. Great part for oversize disc brake conversion wich is pretty hard to find for the Bws. You can also use this bracket with Adelin disc brake on our famous Gyronetics 13'' wheel with 4-piston...
Reference: ESIL034ASRS
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: ST-RP012/BK
Brand: Scootertuning.ca
We offer here RPM 220mm brake disc, the perfect brake disc in conjuction with TRS front hub and NCY, RRGS or lowdown Ruckus fork.
Reference: S6-0510/S
Brand: Stage6
Stage6 rim stickers in black and white on 3M reflective adhesive film for all 10 and 12/13 inch rims. Their exactly rounded shape allows for a very simple and precise positioning on the rim. The set consists of four rim stickers and two small, rectangular stickers.
Reference: MF18.16601
Brand: Motoforce
Replacement clamp for the original air box from Motoforce. Necessary for mounting (goes between air filter box and carb).
Reference: TRS-SG0173
Brand: TRS
TRS Logo wafer Sunglasses black UV400 protection. perfect for riding. everyone has asked for these because they are perfect riding glasses!
Reference: D1101/BB
Brand: Adelin
We can offer here complete brake master cylinder and cable lever unit for scooter with front disc brake and rear drum brake. Great part with Stage6 switch unit on zuma! Available in black and aluminium color. This part are also available in complete hydrolic set for scooter with rear disc brake.
Reference: S410000350015
Brand: Athena
Athena offers a wide range of variators and torque drivers for scooters and maxi-scooters. The choice of materials, together with the specific design of the roller sliding lanes, guarantees an optimisation of the engine power at each rotation rate by extending the acceleration and the highest velocity with only a small loss of power and engine torque....
Reference: 12-NU3215
Brand: Uni
Uni Filter street bike air filters are a direct factory replacement air filter and are designed to fit perfectly into your stock airbox. They provide unsurpassed airflow, dirt stopping and overall performance.
Reference: 4VP-F6290-10-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1000-1293.10
Brand: NCY
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this black on black rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in...
Reference: MF15.14000
Brand: Motoforce
Many stock scooter engines are restricted with an intake manifold. Swapping this with a derestricted manifold will give your scoot better acceleration and higher top speed. If you want to use a bigger carb, going for a derestricted manifold becomes indispensable. Available in different versions with 21 to 30mm diameters.
Reference: 617151
Brand: Malossi
The fixed half of the Vario is located at the end of the crank near the kickstart mechanism. Its larger fins will cool the transmission more efficiently. The angle of the disc is designed for the MALOSSI variator, but it may also be used as a spare part for the original variator. Very robust construction. Package includes a locking washer.
Reference: MF96.90023
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: 465547
Brand: Tun'R
Reference: IP12008
Brand: Scootertuning.ca
Very low-cost replacement intake for Minarelli vertical engines.
Reference: 9929330
Brand: Top performances
This is the complete gasket set for 77/86cc Top Performances TPR cylinder kit. Check the picture to see which gaskets are included.
Reference: VC15485
Brand: Scootertuning.ca
Replacement clear R10W 12V 10W indicator bulb with BA15S fitment, suitable for indicators using orange lenses. Please compare item specifics with your current bulb for compatibility.