No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
150cc 4-Stroke Long-Case GY6 Gas...
Reference: 201.2300
Brand: Polini
The CP is the first carburetor that has been completely developed by Polini and without a doubt one of best carburetor available. Special attention has been paid to size and weight: the carb is very compact and about 40% lighter as compared to traditional carbs. The compact design makes for a very short intake duct, which features a unique concentric...
Reference: SCT-TVR0322
Brand: Ruckhouse
This TVR air intake kit was designed with the Honda Ruckus/Metropolitan tuner in mind. It is fully adjustable to maximize the power and efficiency of your GET Honda Ruckus no matter the temperature, altitude, or humidity levels in your area. Through obsessive studying of pulse waves through the GET’s intake plenum, carb, and intake runner length/shape,...
Reference: SCTFR037
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: 316926
Brand: Malossi
With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an easy-to-adjust, strong sport cylinder. It...
Reference: S6-4030ET01
Brand: Stage6
In order to use the temperature function of Koso Pro and Stage6 temperature gauge and rev counter also for Piaggio and Peugeot engines, you will need this temperature sensor, since the gauge comes with a temperature sensor for Minarelli engines as standard. Of course, the Minarelli version is also sold individually.
Reference: ESIL034CSRS
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: 5ST-E7611-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: YS-701GY6/CA
Brand: Yoshimura
Custom GY6 Genuine Yoshimura Exhaust with Stainless header. With custom STAINLESS STEEL bracket for Fatty 10 inch 12x7, 12x8 or 13" tire. Comes with all mounting hardware and exhaust plug.
Reference: S6-28GY6-001
Brand: Stage6
This kit is ideal to adjust GY6 carburettors. 10 main jets, stored in a practical plastic box so you'll find the right one directly without searching around. Also quite a bit cheaper than ordering the jets individually. The kits are available in different sizes; each kit contains 10 M4 main jets. Sizes: 60, 62, 64 ... 80 (without 78)
Reference: TH52ADIO-150
Brand: Scootertuning.ca
150mm stainless cylinder studs for Honda Dio/Elite AF16-AF18.
Reference: NK201.06
Brand: Naraku
Naraku carburettor with electric choke for use with Kymco SF10 horizontal engines. Jetting: Main jet = 78, Pilot Jet=35, Needle type=2RFM. Tuned for Euro I so jetting will need to be adjusted for use on Euro II vehicles.
Reference: SCT-4SUW00450200
Brand: Scootertuning.ca
Replacement brake pads for Yamaha Bws 50F 2012+ and Yamaha Zuma X 50cc 2014+.
Reference: 343.0029
Brand: Polini
The transparent float bowl lets you see at first glance if it contains fuel. Attention: only for Polini CP carburettor!
Reference: 5PJ-F7411-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK900.54
Brand: Naraku
NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...
Reference: GY14206
Brand: Scootertuning.ca
Full Throttle for 125/150cc 4-stroke Chinese-built scooters. The throttle cable has a length of 212cm and fits almost every 125 and 150cc model. We recommend that you measure the original cable and check the detailed photos for accuracy.
Reference: SP-40001
Brand: Scootertuning.ca
This inverter must be used if you install a MVT DD06 on a yamaha zuma 2002-2011 to revert the ground
Reference: BM01952
Brand: Scootertuning.ca
Reference: 440569
Brand: Teknix
Low price Replacement cylinder kit for your scooter! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.
Reference: 166.0074/R
Brand: Polini
The Corsa is a Polini Powerfull Mid-Race 70cc cylinder improved from the Polini Sport 70cc cylinder. Extreme port timing, polished exhaust port and increased primary compression result signifiant power increase compared to standard 70cc cylinders with very good reliability. The piston is equipped with a chrome and a grey cast iron piston ring. To reach...
Reference: BR8HIX
Brand: NGK
In addition to the standard spark plugs, we can also offer you special racing spark plugs with very thin electrodes made of platinum or iridium. Recommendable especially for highly tuned engines and when using an inner rotor ignition. The spark is much more stable at high revs and this type of electrode has better self-cleaning properties than common CU...
Reference: KW13965
Brand: Scootertuning.ca
Aftermarket cylinder head [combustion chamber diameter = 40mm] for 50cc horizontal Minarelli and CPI engines. Also suitable for Keeway, Generic, Mawi, Longjia vehicles with 2-stroke, 50cc 1PE40QMB engines. Attention on Chinese engines: This cylinder head uses a short thread spark plug e.g.: (NGK Type H means short thread). e.g.: BR8HSA, BR8HS
Reference: P13768
Brand: Replay
Reference: VC18608
Brand: Scootertuning.ca
Cheap speedo cable in original dimensions for motorcycles. Design and dual-side mounts match the original scooter speedo cable. Length from end to end: 96.5cm. Replaces OEM-No.: 72900BMBT000 / 44830KFA69000 / 5FMH35500000 / 4HPH35501000
Reference: TRS-TCS6CVK
Brand: TRS
TRS Stage 6 to CVK throttle cable will allow Stage 6 (SSP) controls to be installed with CVK carburetors. Ideal for those who are upgrading from stock handle controls to Stage 6 or KOSO units. TRS Throttle SSP to CVK throttle cable will also work with other motorcycles or scooters that has the same type of fitting for the carburetor (all Stage 6 or KOSO...
Reference: TRS-FFR/BK
Brand: TRS
The TRS foward Footrest is a great addition to your ruckus for that extra leg room. Great for riders who are taller or want another leg position. Attaches to side of frame. Powdered Black finish and includes stainless hardware (pegs not included). Hard anodized billet spacers are available for those running stock floorboards OR for bigger feet.
Reference: 5114744
Brand: Malossi
Attention! Only made for MHR Team crankshaft unsplined! With the MHR vario 2005 you are optimally equipped to get the most out of your engine. As compared to a common Multivar, the MHR 2005 vario allows for much smoother engine running and thus easier adjustment thanks to its 19x15.5mm rollers. Different angles and optimised roller curves ensure an...
Reference: SCT-TS001
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with our new 2015 logo!
Reference: TH15ADIO50-44
Brand: Scootertuning.ca
Mini stroker crankshaft for AF18 Honda Dio.
Reference: 22765
Brand: Scootertuning.ca
Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the exhaust. Suitable for all scooters with new PGO engines.
Reference: 030737611
Brand: Tecnigas
Nice results with an exhaust retaining an unobtrusive look – that’s what you get with the Tecnigas silent pro exhaust. Extra torque, and top speed is about 5 mph higher. The original look won't get you in trouble with the neighbors either.
Reference: 20480
Brand: Scootertuning.ca
Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm
Reference: 0300-0106.10
Brand: NCY
Stretch the rear end of your Honda Ruckus / Zoomer 6.5 inches with the NCY Billet Aluminum Frame Extension Kit! This can only be described as the cleanest Frame Extension kit on the market to date. We went out of our way to design an extension kit that flows with the form of the Honda Ruckus scooter. The NCY billet Aluminum Frame Extension kit is...
Reference: 348654
Brand: Malossi
Replacement piston for the Mhr Team 70cc 12mm cylinder kits
Reference: 880-0253
Brand: SPX
SPX Inexpensive YTZ7S Battery for scooter.