No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement Piston for the Stage 6 Streetrace 70cc Minarelli Vertical
This Low Down Shock is constructed of an anodized black billet body,...
BLACK SERIES is The Two Brothers...
Reference: 1300-1007
Brand: Scootertuning.ca
A total no-brainer! This kit makes your oil drain bolt magnetically charged to pick up any particles floating in the oil. It's the oldest trick in the book, for good reason--it works! Fits Buddy, Black Cat, Rattler, Kymcos, Lance, Rocketta, Tank, and virtually any other GY6-based engine.
Reference: STR-596.23
Brand: Str8
This system is used mainly in water sports (jetski etc.). Simply attach the emergency kill-switch to the frame or embed it into the casing. The purpose isn't solely cosmetic, it is also very useful when falling: the ignition is immediately switched off so the engine doesn't suffer any damage. You can also use it as an unobtrusive immobilizer.
Reference: MF18.16601
Brand: Motoforce
Replacement clamp for the original air box from Motoforce. Necessary for mounting (goes between air filter box and carb).
Reference: 1000-1336.6
Brand: NCY
These NCY fork tubes provide a smoother ride while lowering your front end 51mm! Attention! You can only use this fork with front disc brake convertion, Ruckus oem fork and wheel are made for Drum brake. The perfect match with our front Hub, 12x8 front wheel, Adelin 220mm Disc Brake, Adelin Caliper mount and Adelin 4 Pistons Caliper. Fork lenght : 330mm /...
Reference: VC24477
Brand: Scootertuning.ca
Replacement H4 12V 60W headlight bulb with P43t base. Please compare item specifics with your current bulb for compatibility.
Reference: D1103/AL
Brand: Adelin
CNC brake lever for scooter with rear drum brake.
Reference: S6-0530/W
Brand: Stage6
Rare Stage6 R/T Breed of Speed sticker that was previously only available on trade fairs and other events. Transparent foil with white or black print.
Reference: S6-35058/
Brand: Stage6
In addition to the Double Layer air filter, Stage6 now also offers the model DRAG RACE. The air filter gives of course ideal airflow and, thanks to the metal mesh, also excellent filtering. Available not only in the well-known white and orange versions, but also in blue! Included in the delivery is an adapter to reduce the size at the connection from 49...
Reference: 9921630
Brand: Top performances
(10mm Gudgeon pin) Newest evolution step from Top Performances. While the DuePlus cylinder has been made of grey cast iron, they now have decided to build the TPR series in aluminium. The LC version is equipped with the modular head of the DuePlus. The TPR cylinders have a bridged exhaust port and are situated in the upper mid-race area, yielding about...
Reference: TH40ADIO50-1542
Brand: Scootertuning.ca
Reference: HOODYS6/
Brand: Stage6
New editions of the coveted hoodies with Stage6, Stage6 R/T and “Scootertuning is not a crime” logos are now available. The logos are screen-printed on the front. Material: 65% cotton, 35% polyester
Reference: NK900.72
Brand: Naraku
NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...
Reference: PI-842907
Brand: Piaggio
OEM Replacement V-belt for Piaggio Fly 50 4-stroke, Vespa Primavera 50 4-stroke, Sprint 50 4-stroke. Piaggio original spare part. OEM No. for comparison: 842907
Reference: SCT-IB4122
Brand: Ruckhouse
Tired of zip ties. this intake bracket replaced the pvc coupler we include in our airbox delete kit. Bracket is shipped raw and must be hand bent. You can paint or powdercoat it any color you choose. Picture is shown as example of installation and does not come with hose or filter.
Reference: BT16001
Brand: Scootertuning.ca
Complete 19mm aftermarket carburettor (membrane type) with E-choke and jetting. Ready to mount; suitable for 50 and 80cc 4-stroke engines. This is a Chinese-builtcarb and matches the quality of the original item.
Reference: TRS-EMFWG/GY6
Brand: TRS
TRS offer here Ruckus GY6 125-150 conversion mount. Allows you to run the 12x 7, 12x8 or 10x8 Fatty rim. Comes with an angled clocking flange. Carb must face forward. TRS mount is a SOLID piece of Billet Aluminium so it's super strong. We also include an angled clocking instead of having to purchase one. Brackets are stainless steel.
Reference: SCT-HD002
Brand: Scootertuning.ca
High Quality ScooterTuning Hoody (50% Polyester) with our new 2015 logo!
Reference: P23355
Brand: Replay
Reference: SCT-P0043/BK
Brand: Ruckhouse
Reference: KEN-1006012
Brand: Kenda
We can offer here the Kenda low profile tire that everyone use on their 12'' Ruckus front wheel! Kenda K433 100/60-12. The perfect match with you 12x4 Front wheel.
Reference: S410485320005
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. The perfect part for all sports and Midrace cylinder.
Reference: S6-1416601
Brand: Stage6
Stage6 has developed this high-quality braided-steel brake hose specifically with racing in mind. It prevents brake fade and achieves a constant pressure point. Minimal expansion and a thorough checking of each hose ensure maximum safety and brake efficiency in every situation. Using braided steel brake hoses prevents excessive expansion of brake hoses,...
Reference: KO-BA022W10
Brand: Koso
Multifunctional, universal digital Koso speedometer with illuminated display, available with black casing. The speedo has a size of 100 x 60 x 20mm and requires a 12V supply and a battery. Revs are picked up inductively while the speed is picked up via a magnet sensor installed at the wheel.
Reference: 32104
Brand: Scootertuning.ca
Alternator fan cover for scooters with the 50cc Minarelli vertical engine.
Reference: S6-5616601
Brand: Stage6
The Stage6 R/T Oversize CVT system. Enlarged CVT systems that extend the complete transmission range have become essential for race and midrace engines. Included in the delivery are the complete Stage6 R/T Oversize variator, the Stage6 R/T Torque Boost torque driver kit and the Stage6 R/T Oversize drivebelt.
Reference: 316926
Brand: Malossi
With this 70cc version, Malossi offers a cast-iron cylinder for daily use. Its acceleration is a bit weaker than the one of Polini Sport, but on the other hand its ideal rpm range is about 800 rpm higher, which translates into slightly better peak power. When combined with Laser X Pro or Yasuni R, you'll get an easy-to-adjust, strong sport cylinder. It...
Reference: 201.2300
Brand: Polini
The CP is the first carburetor that has been completely developed by Polini and without a doubt one of best carburetor available. Special attention has been paid to size and weight: the carb is very compact and about 40% lighter as compared to traditional carbs. The compact design makes for a very short intake duct, which features a unique concentric...
Reference: ESIL034CSRS
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: 4CW-F7114-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 241.647
Brand: Polini
Polini Hi-Speed now available in a 4-stroke version set! Hi-Speed stands for better drive and smoother shifting. Supplied as shown with one set of rollers 16x13, 6.9g, and one set of sliders. We recommend a 15% stiffer counterpressure spring with this model. Polini quality for 4-strokes.
Reference: YS-701GY6/CA
Brand: Yoshimura
Custom GY6 Genuine Yoshimura Exhaust with Stainless header. With custom STAINLESS STEEL bracket for Fatty 10 inch 12x7, 12x8 or 13" tire. Comes with all mounting hardware and exhaust plug.
Reference: MF19.16842
Brand: Motoforce
If you're looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though. (10mm gudgeon pin)
Reference: 1411414
Brand: Malossi
Malossi large pore sports air filter. Great filtering performance in fire-resistant foam.For optimal performance when used on the road, we recommend using air filter oil.
Reference: 343.0021
Brand: Polini
Polini 45 degree throttle cable guide for carb caps.
Reference: SCT-4SUW00450200
Brand: Scootertuning.ca
Replacement brake pads for Yamaha Bws 50F 2012+ and Yamaha Zuma X 50cc 2014+.