No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
With the RS II, Tecnigas offers an...
Reference: 22765
Brand: Scootertuning.ca
Replacement membrane block with plastic membranes. This is safer should they break off into the cylinder, where they will simply be spat out the exhaust. Suitable for all scooters with new PGO engines.
Reference: 20480
Brand: Scootertuning.ca
Vacuum-operated fuel tap for various scooters with Piaggio engines. Fitment diameter in tank: 15mm
Reference: 117206
Brand: Malossi
Replacement Malossi gasket set 70cc [Sport] - Kymco/Sym upright
Reference: NK600.57
Brand: Naraku
Great quality Naraku crankshaft for 50cc Minarelli 4-stroke engines, as found in Yamaha Giggle (C3), Neos, Vino or MBK Booster scooters. Corresponds to the original crank dimensions and is an ideal replacement for the original.
Reference: BT13852
Brand: Scootertuning.ca
Standard v-belt replacement for original part. Suitable for vehicles with 12” wheels. Made in China. Dimensions: 729-17,7-30
Reference: TRS-ESK/BK
Brand: TRS
TRS 9.5 Extension kit Version 3. POWDER COATED GLOSS BLACK not painted. FITS ALL NPS-50 2003 And Newer. Version 3 now mounts to cross brace, comes with beauty washers, and lighter deign. NO drilling out nuts required. Still has same 3piece locking design so everything is trued. No welding or cutting required. Shock Mount is shorter and has 2...
Reference: 0300-0106.10
Brand: NCY
Stretch the rear end of your Honda Ruckus / Zoomer 6.5 inches with the NCY Billet Aluminum Frame Extension Kit! This can only be described as the cleanest Frame Extension kit on the market to date. We went out of our way to design an extension kit that flows with the form of the Honda Ruckus scooter. The NCY billet Aluminum Frame Extension kit is...
Reference: 074900/1
Brand: Athena
Attention! : Crankshaft Athena Racing 80cc 43mm stroke required! High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: 348654
Brand: Malossi
Replacement piston for the Mhr Team 70cc 12mm cylinder kits
Reference: 082096
Brand: Athena
The ATHENA springs are perfect for your original or performance variator and suit perfectly the Athena ones. They are provided in different colours, indicating in kilograms the applied elastic strength.
Reference: 12-UFV6
Brand: Uni
Uni’s “Foam Filter Air Vents” increase the pre-filtered air supply to the airbox. The foam filter element may be cleaned and re-oiled. For Street, Dirt, ATV’s, UTV’s, etc.
Reference: 5PJ-F7421-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 298323.G0
Brand: Malossi
We can offer various torque springs from Malossi. The main thing about adjusting an engine is to find the right combination of torque spring, variator weights and clutch springs. If the drive belt slips, you will have to go for a stiffer torque spring. On the other hand, choosing a spring that is too stiff will also reduce power output. If you have any...
Reference: S6-0502/W
Brand: Stage6
New Stage6 maxi sticker sheets in Din A2 and A4. Now with Stage6 R/T logo. You can choose between two versions: white for dark surfaces or black for light surfaces; for the smaller set, there is only one colour version.
Reference: 90380-15817-00
Brand: Yamaha
Yamaha OEM replacement part. Goes on the kickstart shaft.
Reference: BZA30432
Brand: Scootertuning.ca
kickstart engagement gear for Piaggio scooters with 2-stroke and 4-stroke engines from 1999 onwards. The teeth of the kickstart gear will wear out overtime due to use and must therefore be changed to ensure adequate engagement.
Reference: S6-2016602P
Brand: Stage6
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed. Only use with tuning kits! Original cylinders are normally not powerful enough to pull this sort of gearing. Contrary to common gear units, the ones from Stage6 come...
Reference: TH39ADIO-1538
Brand: Scootertuning.ca
Reference: TRS-RPP041-2
Brand: TRS
If you have removed the Stock Airbox or purchased one of our Airbox eliminator kits you have to plug the REED Valve also called a PAIR or PAR valve. You can use a Cap or Plug like seen in the photo. Or you can use a Billet CNC Block off Plate. Why spend $$$$ on the big stuff and leave the little stuff out. Made from 6160 Billet Aluminum comes with...
Reference: 140.0223
Brand: Polini
The 79cc Sport is a high-torque cylinder with excellent acceleration, ideal for daily use. The performance is mainly due to the increase in capacity, which makes for a reliable cylinder. Comes with all gaskets etc. needed for installation.
Reference: 462611
Brand: Tun'R
Reference: SW-H21S
Brand: Sunworld
Sunworld PWK Carburetor a very high precision carburettor. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. They have been used for several years in the race and have been proven. The carb is of course equipped with a power jet; and in order to easily find the optimal adjustment, instructions are...
Reference: ER9EH6N
Brand: NGK
NGK high quality spark plug for Piaggio 50cc 4 stroke 4v engine.
Reference: 317.0110
Brand: Polini
Due to the higher stroke of the Big bore 86cc and more cylinders, original cylinder studs are too short. Polini offer here 4 high quality cylinder studs of 7x123mm.
Reference: SCT-OA1336
Brand: Scootertuning.ca
Simple, black Go-kart airbox with very high airflow and good filter action with 28/35/47mm carb connections with 45 and 90 degree adapters. 175mm long and 90mm diameter. Great, every day alternative to a sports filter.
Reference: BT13876
Brand: Scootertuning.ca
Wedge for positioning the alternator rotor on the crankshaft.
Reference: NK100.99
Brand: Naraku
Replacement piston for the 70cc original and 70cc NARAKU Sports V.2 Cylinder (NK100.31). Delivered as shown with piston rings, gudgeon pin and circlips.
Reference: P707
Brand: Replay
Reference: MF96.90025
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: 200.0311
Brand: Polini
The Polini Speed is an unobtrusive sport exhaust with European homologation. It’s completely made of steel, painted in matt black, and equipped with a heat shield. Like comparable touring pipes, it is suitable and offer good performance with original or 70cc sport engines. All parts necessary for mounting are included in the delivery. NOTE: Like other...
Reference: S6-98006
Brand: Stage6
Bike Stand (Paddock Stand) Stage6 MK3 for Piaggio / Minarelli / Peugeot. The Stage6 paddock stand has been revised again, this time the main focus when developing the next generation was on stability and precision to make the stand even more robust, durable and resistant. The logos on the white tires have been spruced up, and there is now also a Stage6...
Reference: 070196
Brand: Athena
The ATHENA springs are perfect for your original or performance variator and suit perfectly the Athena ones. They are provided in different colours, indicating in kilograms the applied elastic strength.
Reference: BM03290
Brand: Scootertuning.ca
Inexpensive front brake disc for PGO and Genuine Scooter.
Reference: 441277
Brand: Doppler
Latest addition to Doppler's range of crankshafts. Excellent quality with really strong INA bearings. These crankshafts may be used in engines revving up to 15,000 Rpm, excellent value for money.
Reference: W539.20.32
Brand: Wurth
Heavy duty hose clamp, can be used on most 23mm intakes, 15x22mm coolant hoses, etc.