No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: MF99.00055
Brand: Motoforce
This is the most inexpensive tool to lock the variator, available in two versions. It can simply be threaded into the spark plug hole of the cylinder head. Then turn the engine over carefully with the variator until the piston top touches the tip of the tool and the crankshaft is locked. Please employ this tool carefully; otherwise you can damage the...
Reference: S6-8016805
Brand: Stage6
The Stage6 HPC (high primary compression) crankshaft is a full-circle crankshaft, and as such increases primary compression in the crankcase. It has been developed in cooperation with F. Koopmans and is completely made of metal (i.e. no plastic padding). The bearings can handle up to 16,000 rpm! Made in Italy.
Reference: W500.14298
Brand: Wurth
Best way to hold your wiring harness close to the frame. Must drill a 7mm hole to clip the cable strap.
Reference: 4688
Brand: Doppler
If you think that an open racing air filter is too loud and there is enough room in your helmet compartment, you should think about using Doppler's new air boxes. These systems have a connection size of 35 mm (which may be reduced to 32 mm via the metal spacer included in the delivery) and an interior diameter of 20 mm. With its size of 21 cm length and...
Reference: MF16.30001
Brand: Motoforce
You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables. Also included is an adapter for...
Reference: NK102.07
Brand: Naraku
Complete set of quality crank oil seals from Naraku, for scooters with 125/150cc GY6 engines. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: STR-696.11/WH
Brand: Str8
STR8 LED indicators in a very stylish look. With their aerodynamic lines, they are a perfect match for many modern scooter models. As always, they come equipped with reliable LED technology and E-mark. Can be universally used and offers a choice of two body colours. Length: 90mm (thread 20mm)
Reference: 619535
Brand: Malossi
Malossi High Tech drive belt for racing or tuned engines. Can be used as original replacement, as the price is lower than on the original item. Speical inter-woven aramid inserts means greater durability and performance. Most robust in our range. Stiffer counter pressure springs required. Great Malossi quality. Dimensions: 830x18.5x8mm 30°
Reference: TRS-HLK/BK
Brand: TRS
Finally a BOLT-ON solution to lowering your headlights! No more need to send in your headlight frame for welding, you can just buy this simple bracket kit, and lower them yourself! Give your Ruckus a much lower, meaner stance and appearance in the front!
Reference: S410485320004
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. Attention : can only be used with the 80cc athena cylinder kit.
Reference: TFC-017
Brand: TFC
TFC Quality 78cc cylinder kit. The slotted head will help to keep the cylinder kit temperature lower.
Reference: NK164.66
Brand: Naraku
Top end cylinder gasket set for 50cc Minarelli AC horizontal engines as listed.
Reference: 1200-1021.10
Brand: NCY
High quality aluminum drive by NCY for Genuine & GY6 150cc scooters
Reference: MF92.101
Brand: Motoforce
In scooter racing, mechanical water pumps are often replaced with electric models to reduce the rotating mass at the crankshaft, which results in better throttle response and a slight increase in performance. Another situation where electric water pumps come in handy is when cylinders in air-cooled engines are replaced with liquid-cooled cylinders....
Reference: 260091
Brand: Teknix
Many stock scooter engines are restricted with an intake manifold. Swapping this with a derestricted manifold will give your scoot better acceleration and higher top speed. If you want to use a bigger carb, going for a derestricted manifold becomes indispensable.
Reference: 243.093
Brand: Polini
drive belt keeps slipping, the vario doesn't shift smoothly within the ideal rpm range or the engine keeps running below the ideal rpm range despite using lighter rollers. After replacing the torque spring, the vario will have to be readjusted. Polini's Evo Slider plastic spring plate gets rid of the problem caused by twisted springs, which have negative...
Reference: TH18ADIO50-54
Brand: Scootertuning.ca
Replacement Gasket set for 54mm AF16-AF18 Cylinder kit.
Reference: NK153.20
Brand: Scootertuning.ca
Crankcase cover gasket with exact fit. Made to replace the factory installed gasket.
Reference: S6-75ET22
Brand: Stage6
This is the complete gasket set for Stage6 R/T cylinder kit. Check the picture to see which gaskets are included.
Reference: 441277
Brand: Doppler
Latest addition to Doppler's range of crankshafts. Excellent quality with really strong INA bearings. These crankshafts may be used in engines revving up to 15,000 Rpm, excellent value for money.
Reference: 22238
Brand: Buzzetti
We stock RMS and Buzzetti sidestands for most models. The stands come complete with all the bits and pieces needed for their installation. Simply bolted to the frame.
Reference: 22793
Brand: Scootertuning.ca
Replacement chrome side stand for the MBK Booster and Yamaha BWs Scooters.
Reference: 2711790.C0
Brand: Malossi
These two reed versions are suitable for Malossi's VL14 reed valve. Depending on the angle of the carbon fibres (45 or 90deg), you can influence your engine's characteristics. Both sets have a thickness of 0.3mm.
Reference: 353-0931
Brand: Maxima
SCOOTER 4T is specially formulated for modern, free-revving scooters and mopeds. Designed to handle the stresses placed on modern engines defined by constant stop-and-go traffic, excessive idling and fully loaded engine operation. A unique blend of the latest anti-wear additives with an advanced detergent system to keep your engine running smooth and...
Reference: MAL-PCC70M4
Brand: Malossi
The new complete cylinder equipped with V2 CDI for Yamaha 50 4-stroke LC engines was born! Force Master V2 is the innovative CDI which allows to change the injection in order to fit perfectly the new Malossi 4-stroke cylinder kit. This CDI has been scheduled with 3 different maps so as to be coupled perfectly with your vehicle whatever its setting is! CDI...
Reference: VC30986
Brand: Scootertuning.ca
Replacement PY21W orange 12V 21W indicator bulb with BAU15s fitment, suitable for indicators using clear lenses. Please compare item specifics with your current bulb for compatibility.
Reference: 071700/1
Brand: Athena
High performance 50cc Sport aluminum cylinder kit made in Italy by Athena. The Athena Sporting is our top seller aluminium cylinder kit. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Supplied with piston and ring, cylinder head, carbon reeds and gasket set with various base...
Reference: BSP901R
Brand: Yasuni
We can offer here complete rebuilt kit for all yasuni range of exahust, Z – R – C16 – C20 – C21 – C30.
Reference: SCT-LS012/AL
Brand: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in with this shock.
Reference: V846DIO50-AFW001
Brand: Scootertuning.ca
Reference: MF99.00068
Brand: Motoforce
This special tool locks the torque driver, which makes a quick and straight-forward removal of clutch, clutch bell and torque driver possible. An essential part for serious tuners.
Reference: 508532
Brand: Doppler
The DOPPLER oil pump cover combines design and functionality. It is entirely cut in the mass and anodized. Its purpose is to plug the hole in the oil pump housing when removing it from the vehicle (mixture). It protects the crankcase environment from outside elements.