No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: IP18059
Brand: Scootertuning.ca
Low-cost, reinforced clutch spring set. The clutch engages approx. 1500-2000rpm later, allowing the engine to put more power down under acceleration. We recommend this set for those who nip about in traffic or if your engine struggles with drive on inclines. Fits the original clutch. Set contains 3 springs. A great product, available in various stiffness’s.
Reference: TRT-TS001/RE
Brand: 2Fast
High Load Torque spring made in Italy by 2Fast. This torque spring is made to reach the maximum performance of your 2Fast cylinder kit. Warning! Spring Diameter ; 58mm. Only fits Piaggio or 2Fast rear pulley.
Reference: 5518409
Brand: Malossi
The Injtronic engine control unit is the natural evolution of the original Piaggio system and enhances vehicle performance. The latest generation 32 bit microprocessor and hardware designed according to the most recent automotive quality standards make up the RACING DNA of this device. Designed to be plug & play, in other words compatible with the...
Reference: IP12719
Brand: Scootertuning.ca
Recoil spring for kickstarter levers on all Peugeot and Kymco engines.
Reference: 209.0409
Brand: Polini
This is the complete gasket set for Polini sport 50cc cylinders.
Reference: D1102/BK
Brand: Adelin
We can offer here complete brake master cylinder and cable lever unit for scooter with front and rear disc brake. Great part with Stage6 switch unit on zuma! Available in black and aluminium color.
Reference: 6511990B
Brand: Malossi
Fully aluminum RACING tap with violet anodized screw opening/closing knob. 15 mm inserting to tank with blocking clamp. 9 mm inserting petrol pipe.
Reference: TRT-TS001/BL
Brand: 2Fast
High Load Torque spring made in Italy by 2Fast. This torque spring is made to reach the maximum performance of your 2Fast cylinder kit. Warning! Spring Diameter ; 58mm. Only fits Piaggio or 2Fast rear pulley.
Reference: NK800.11
Brand: Naraku
Naraku performance fan for tuned engines. Also for untuned engines. For AC engines, we recommend an additional air scoop. Please pay attention to the screw length as this can vary. The lighter fan wheel means less rotating mass, which give a slight performance enhancement.
Reference: S6-01211010/
Brand: Stage6
We can offer you high-quality silicone coolant hoses from Stage6 in a choice of colour. Thanks to the universal length of 1500mm and the 90° connection, it can be used for practically all common water-cooled vehicles.
Reference: 9931700
Brand: Top performances
These new intake manifolds are supplied split up: the intake rubber can be rotated into the flange according to the specific requirements of the vehicle, in order to locate which is the best angle for the carburettor assembly. Attention! This intake may require small fairing modification depending on which scooter model you intall it.
Reference: P400485100099
Brand: Athena
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil,...
Reference: CPR8E
Brand: NGK
NGK is one of the world’s leading spark plug manufacturers. As the factory-fitted choice of many vehicle brands, NGK is there when the spark starts to fade. You get an NGK standard spark plug, just like the one fitted to your vehicle. Heating value and plug construction are as the original. The service life of a spark plug depends on the fuel type, engine...
Reference: 9931370
Brand: Top performances
The Black Trophy is Top Performance’s successor to the Trophy cylinder series. The cylinders have been modified only slightly; quality and scope of delivery are similar. The Asso piston, however, is now partly molybdenum-disulfide-coated, which improves running smoothness and performance while minimising friction and thus heat development. This set-up...
Reference: BT12019
Brand: Scootertuning.ca
Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan should be replaced at the sight of even the slightest damage. Also suitable for Kymco 50cc 2-stroke and 4-stroke engines.
Reference: RH-188
Brand: Ruckhouse
These lugs allow you to run our M12x1.5 Flat Lug Nuts with a Gy6 Rear Hub with M10x1.5 bolt hole. No need to drill and tap your hub or open the hole on your wheel . Most wheel come with M10 holes not M12 . Put wheel on with these, insert washer then Flat Lug Nut and you now have the look of Lugs without any mods. We recommend Red Loctite on both hub and...
Reference: SCT-MF1P88
Brand: Scootertuning.ca
Reference: NK101.10
Brand: Naraku
High-quality replacement piston for 50cc original and 50cc Naraku cylinders for Minarelli AC and LC engines. Delivery as shown, including: piston rings, gudgeon pin and circlips. Special molybdenum coating for protecting the cylinder and piston during the run-in period. It is a good rule to change the piston in a 50cc 2-stroke engines after about 6,000...
Reference: MF78.14004
Brand: Motoforce
Fan wheel for the fixed front pulley in Piaggio engines type C/D, OEM quality. A matching fixed front pulley and a star washer can be found among the replacement parts.
Reference: SCT-GEARCOVER
Brand: Scootertuning.ca
This cover has been completely redesigned to solve the problem of the OEM cover being discontinued. These are the same gear bearing as before, the primary bearing is now supported over its entire surface. The cover has also been designed to adjust the drift of wide range torque correctors (2Fast, Malossi, Stage6 & more).
Reference: SCTFR045
Brand: Scootertuning.ca
We can offer here Quality fairing for Yamaha Bws/Zuma 2002-2011.
Reference: GY14630
Brand: Scootertuning.ca
Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.
Reference: 481473
Brand: Tun'R
Tun'r nice style keyring available in wide model selection!
Reference: P9855
Brand: Replay
ATTENTION! Does NOT fit Pre-1998 models with front drum brake.
Reference: RH-187
Brand: Ruckhouse
Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor
Reference: 465546
Brand: Tun'R
Reference: S6-SSP566WP/
Brand: Stage6
Stage6 SSP Water Pump for Minarelli engines, state-of-the-art technology combined with stunning design. CNC-machined aluminium pump, including top quality impeller that increases flow rate by 40%. Available in chrome, titanium, grey, blue and red.
Reference: S6-35070
Brand: Stage6
In addition to the air filter inserts for your original air filter boxes, we can offer you universal mats from Stage6. So if you can't find any air filter inserts for your scoot, you can simply get one of these and cut it to size. The two layers of the filter ensure an ideal air flow coupled with a maximum of filtering performance. Available in 2 sizes.
Reference: 200.0297
Brand: Polini
We offers here last exhaust for cylinder type MHR Replica, Polini Corsa, Airsal T6, Top Performance Trophy. The For race 4 have same style that Big Evo with the silent black anodized. Of course Polini revised it in terms of performance. This part increase performance at all speeds compared to the old version and the body of the exhaust have 7 instead of 6...
Reference: 1CE-H3912-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: T9906052
Brand: Top performances
Reference: S6-8031400/MET
Brand: Stage6
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. This is why Scooter-Attack only collaborates with leading European and Japanese manufacturers of bearings and oil seals such as SKF and Corteco. We offer you these high-quality crankshaft bearing kits in 2 versions, with metal cage or with...
Reference: 465590
Brand: Tun'R
Beautiful F1-look mirror with real mirror glass and a short body. Fits both left and right side, as it comes with a fitting piece to adapt to left hand thread. Fits all scooters with M8 thread size and is available in a choice of colours. New enhanced quality and brighter colours!
Reference: 202.1406
Brand: Polini
Taller gears in the transmission reduce the overall reduction factor of the gearbox. If the engine is powerful enough to pull the taller gears, this modification will also raise top speed.
Reference: MF16.RK001
Brand: Motoforce
Motoforce offer here repair kit for PHVA / PHVB carb.