No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Polini also offer a two-part intake...
Reference: NK164.66
Brand: Naraku
Top end cylinder gasket set for 50cc Minarelli AC horizontal engines as listed.
Reference: S6-75ET22
Brand: Stage6
This is the complete gasket set for Stage6 R/T cylinder kit. Check the picture to see which gaskets are included.
Reference: 209.0409
Brand: Polini
This is the complete gasket set for Polini sport 50cc cylinders.
Reference: W500.14298
Brand: Wurth
Best way to hold your wiring harness close to the frame. Must drill a 7mm hole to clip the cable strap.
Reference: 6511990B
Brand: Malossi
Fully aluminum RACING tap with violet anodized screw opening/closing knob. 15 mm inserting to tank with blocking clamp. 9 mm inserting petrol pipe.
Reference: SW-H28S
Brand: Sunworld
Sunworld PWK Carburetor is a very high precision carburettor. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. They have been used for several years in the race and have been proven. The carb is of course equipped with a power jet; and in order to easily find the optimal adjustment, instructions are...
Reference: NK153.20
Brand: Scootertuning.ca
Crankcase cover gasket with exact fit. Made to replace the factory installed gasket.
Reference: S6-1021013
Brand: Stage6
Organic Stage6 sport brake pads – perfect for daily use. The strongest point of these brake pads is their longevity. They are slightly softer than other brake pads, which makes for fuller feeling brakes, although they of course also allow for hard braking. Please remember that these brake pads have to be broken in and hard stops need to be avoided;...
Reference: STR-696.11/WH
Brand: Str8
STR8 LED indicators in a very stylish look. With their aerodynamic lines, they are a perfect match for many modern scooter models. As always, they come equipped with reliable LED technology and E-mark. Can be universally used and offers a choice of two body colours. Length: 90mm (thread 20mm)
Reference: 343.0004
Brand: Polini
Replacement parts for Polini CP carbs only.
Reference: MF16.30005
Brand: Motoforce
You can decide for yourself whether you want to run your engine with or without choke! With tuned engines, e-chokes are of no use, since they are designed for standard engines. This is where manual chokes are needed. The choke lever is directly attached to the carburettor, so you don't have to fumble with Bowden cables. Also included is an adapter for...
Reference: 1000-1315.1
Brand: NCY
Brake Caliper adaptor by NCY that allow to use 2 piston brake caliper (Ncy, Stage6, Polini) on NCY/Low down fork.
Reference: SCT-LS012/AL
Brand: Ruckhouse
This Low Down Shock is constructed of an anodized black billet body, 550lbs/in coil, and features an adjustable length and spring pre-load. Give your scooter the aggressive stance it deserves with this rear shock. This shock is extremely popular with Honda Ruckus owners that want to go as low as possible. Drop your scooter an extra 1.5in with this shock.
Reference: TFC-017
Brand: TFC
TFC Quality 78cc cylinder kit. The slotted head will help to keep the cylinder kit temperature lower.
Reference: W539.25.40
Brand: Wurth
Heavy duty hose clamp, can be used on most 32mm intakes, 28-35mm Air filters.
Reference: 201.0167
Brand: Polini
Polini carburetors are lodged a flat slide lightweight chrome alloy, highly resistant to abrasion and wear, which improves slip. Polini carburetors allow more efficient to have every rpm benefits. Providing better acceleration and recovery, also improving the extension at maximum speed and optimizing the power output. They provide a simple adjustment with...
Reference: IP11048
Brand: Scootertuning.ca
Universal, manual fuel tap with 6 mm connection. Simply place the tap between the fuel hoses.
Reference: 9933790
Brand: Top performances
Reference: 16830
Brand: Scootertuning.ca
CDI ignition unit for Piaggio / Gilera without catalytic convertor. Complete replacement solves many CDI-caused issues. Suitable for vehicles without factory-fitted catalytic convertor, general from 2000 on (Pre Hyper 2). Please check product image if you are unsure.
Reference: 1200-1202.5
Brand: NCY
High quality, fourth generation green racing clutch, from NCY. For use in GY6 engines. This is the upgraded version of the blue, third generation racing clutch, part number 1200-1159.
Reference: VC30986
Brand: Scootertuning.ca
Replacement PY21W orange 12V 21W indicator bulb with BAU15s fitment, suitable for indicators using clear lenses. Please compare item specifics with your current bulb for compatibility.
Reference: MF99.00068
Brand: Motoforce
This special tool locks the torque driver, which makes a quick and straight-forward removal of clutch, clutch bell and torque driver possible. An essential part for serious tuners.
Reference: 5519630
Brand: Malossi
Manages multiple maps simultaneously without having to resort to a hand-held device, with just a simple click. Ability to shift the selected map by moving the OFFSET (± 2°). The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical...
Reference: TH18ADIO54-AL0.5
Brand: Scootertuning.ca
Cylinder base gasket 0.5mm for AF16-AF18 54mm cylinder kit.
Reference: 353-0931
Brand: Maxima
SCOOTER 4T is specially formulated for modern, free-revving scooters and mopeds. Designed to handle the stresses placed on modern engines defined by constant stop-and-go traffic, excessive idling and fully loaded engine operation. A unique blend of the latest anti-wear additives with an advanced detergent system to keep your engine running smooth and...
Reference: 519988
Brand: Malossi
The MULTIVAR is a sturdy high-quality variator from Malossi. Included in the package are a torque spring and a set of 16x13mm weights. CAD-designed roller area to give very good acceleration and a wider range.
Reference: 9931700
Brand: Top performances
These new intake manifolds are supplied split up: the intake rubber can be rotated into the flange according to the specific requirements of the vehicle, in order to locate which is the best angle for the carburettor assembly. Attention! This intake may require small fairing modification depending on which scooter model you intall it.
Reference: TUB902-RPRO
Brand: Yasuni
The R-PRO was designed for pure performance enthusiasts. Its lightweight structure optimizes the power-to-weight ratio and improves exhaust gas flow to extract every horsepower from your engine. With up to 12 hp and an optimal rev range between 10,000 and 12,000 rpm, the R-PRO guarantees explosive acceleration and an impressive top speed.
Reference: VC19170
Brand: Scootertuning.ca
Quick and simple replacement lever for broken or damaged clutch or brake levers. 100% match of the original shape, colour and mount. Single lever in desired colour supplied. 53178-GN2-930 / 53178-GN2-90N2
Reference: 0400-1005.4
Brand: NCY
We can offer here NCY Lower seat frame for Honda Ruckus/Zoomer. This seat frame reduce the seat height by 8cm. A must-have for custom tuners! Available in White, Black and Chrome.
Reference: MF78.14004
Brand: Motoforce
Fan wheel for the fixed front pulley in Piaggio engines type C/D, OEM quality. A matching fixed front pulley and a star washer can be found among the replacement parts.
Reference: P124556
Brand: Replay
Reference: S6-01211010/
Brand: Stage6
We can offer you high-quality silicone coolant hoses from Stage6 in a choice of colour. Thanks to the universal length of 1500mm and the 90° connection, it can be used for practically all common water-cooled vehicles.