No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
As the saying goes loud pipes save...
Reference: IP32901
Brand: Scootertuning.ca
Reed valve gasket for 50cc Piaggio and Peugeot horizontal engines.
Reference: TH27ADIO50-BK3032
Brand: Scootertuning.ca
Reference: S6-8031400/MET
Brand: Stage6
Especially with high-performance engines you should not be too stingy when it comes to buying crankshaft bearings. This is why Scooter-Attack only collaborates with leading European and Japanese manufacturers of bearings and oil seals such as SKF and Corteco. We offer you these high-quality crankshaft bearing kits in 2 versions, with metal cage or with...
Reference: RH-187
Brand: Ruckhouse
Mikuni Pulse Fuel Pumps employ an engine’s fluctuation in crankcase pressure to pump fuel from a remote fuel tank to an engine’s carburetor Rectangular fuel pump with 1 outlet for a single carburetor
Reference: 200.0297
Brand: Polini
We offers here last exhaust for cylinder type MHR Replica, Polini Corsa, Airsal T6, Top Performance Trophy. The For race 4 have same style that Big Evo with the silent black anodized. Of course Polini revised it in terms of performance. This part increase performance at all speeds compared to the old version and the body of the exhaust have 7 instead of 6...
Reference: BT12019
Brand: Scootertuning.ca
Plastic fan wheel for variators on GY6 50cc 139QMB/QMA engines. Belt damage is caused by too much heat in the drive area. For this reason, the fan should be replaced at the sight of even the slightest damage. Also suitable for Kymco 50cc 2-stroke and 4-stroke engines.
Reference: GY14630
Brand: Scootertuning.ca
Starter relay or starter solenoid for 125/150cc GY6 4-stroke Chinese-built scooters. 2-pin connector.
Reference: 19717
Brand: Scootertuning.ca
Complete rear brake Bowden cable for Yamaha BW and MBK Booster scooters. Cable corresponds to the dimensions of the original. This cable features an inner PTFE gliding sleeve (polytetrafluoroethylene). The high self-lubricating properties of PTFE material ensure durable and smooth sliding, with no additional lubrication required. Never lubricate PTFE...
Reference: 465546
Brand: Tun'R
Reference: S6-38001CR
Brand: Stage6
While the Malossi Boost Bottle is intended for 125-250cc engines, this one from Stage6 is especially designed for 70cc engines. Like the Doppler version, it has a solid chamber, which prevents the airstream from oscillating back and forth through the carb's venturi when throttle is lowered, hence the airstream is only charged with fuel once which improves...
Reference: SCT-MF1P88
Brand: Scootertuning.ca
Reference: 1200-1048.5
Brand: NCY
This Super Trans Kit is one of the best dollar-for-dollar bolt-ons to improve your bike! Quicker accelleration, higher top speeds, and makes your CVT the smoothest operating trans in town! From rapid down shifting to slow cruising, this thing is smooth. Ultralight balanced components, oversized wear pads, and state of the art polytetrafluoroethylene...
Reference: 481473
Brand: Tun'R
Tun'r nice style keyring available in wide model selection!
Reference: S6-0512/S
Brand: Stage6
Stage6 rim stickers in black and white on 3M reflective adhesive film for all 10 and 12/13 inch rims. Their exactly rounded shape allows for a very simple and precise positioning on the rim. The set consists of four rim stickers and two small, rectangular stickers.
Reference: 16882
Brand: Scootertuning.ca
Complete lock set as original replacement for Kymco Agility 50cc. Please check image against the connector.
Reference: MF96.90024
Brand: Motoforce
We can offer you a selection of engine bolts, screws, nuts and washers from Motoforce, such as the ones for the engine or gear box cover, for the shock absorber mount or the oil drain plug. These are high-quality small parts. Please check the size before ordering.
Reference: 0800-1064.1
Brand: NCY
CNC billet aluminum handlebar mount for Zuma 50. Direct bolt on for aftermarket or OEM handle bars.
Reference: S6-58ET001
Brand: Stage6
Replacement parts for Stage6 pro variator.
Reference: 203.0029
Brand: Polini
Polini EVOLUTION air filter. About 20 cm long and with two layers of special foam with different pore sizes. Ultimate racing optic and high air flow. 90° connection with a connection size of 38 mm; unfortunately it's quite loose with 17-21mm carbs. This air filter should only be used if there is not enough room for air filters with straight connection,...
Reference: TH39ADIO-1630
Brand: Scootertuning.ca
Reference: TRT-P52
Brand: 2Fast
Replacement piston (52mm) for 2Fast 94cc and 100cc cylinder kits.
Reference: IP32532
Brand: Scootertuning.ca
Quality aftermarket 2 coil with HT lead. This coil is installed on most 50cc 2-stroke and 50cc/125cc GY6 4-stroke scooters.
Reference: 5717218
Brand: Malossi
The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force, the new engine crankcase compatible with C-One, RC-One and the original Piaggio extended crankcase. It's called Air Force because its strength lies in the ability of simultaneously allowing entry of a greater mass of air, channelling it precisely on the...
Reference: S6-31RT-PWK28
Brand: Stage6
The R/T PWK carburetor is a new development from KOSO, produced exclusively for Stage6. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. The outside measurements and the size of the connection to the intake manifold have been reduced so that mounting is easier. Furthermore, the black racing finish...
Reference: BT13877
Brand: Scootertuning.ca
This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals properly.
Reference: 111HF
Brand: SBS
Reference: P9855
Brand: Replay
ATTENTION! Does NOT fit Pre-1998 models with front drum brake.
Reference: 241.672
Brand: Polini
These HI-SPEED variators are Polini's newest development. They are of high quality and feature an optimised ramp design. Furthermore, every kit includes a torque spring that prevents belt slip and thus ensures better power transmission. The really cool thing is, however, the evo slider, a kind of guide plate that tackles the problem of twisting torque...
Reference: S6-905
Brand: Stage6
With the Stage6 magnet kill switch, we can offer you a state-of-the-art product as it is used in motorsport. Nevertheless, it can also come in handy if you only use your scooter to commute from A to B, as it can be used like a small but effective immobiliser: it prevents the engine from being started when the ignition lock has been short-circuited.
Reference: A366414
Brand: Tun'R
Front Fairing Spoiler for Yamaha pre-bug Zuma. It is mounted in place of the original fairing panel.
Reference: S6-35070
Brand: Stage6
In addition to the air filter inserts for your original air filter boxes, we can offer you universal mats from Stage6. So if you can't find any air filter inserts for your scoot, you can simply get one of these and cut it to size. The two layers of the filter ensure an ideal air flow coupled with a maximum of filtering performance. Available in 2 sizes.
Reference: KO-BA041000
Brand: Koso
The DB01RN is Koso's latest multi-functional dashboard instrument. It combines all the functions you need for offroad use and everyday riding and it comes with E-mark / homologation. Its modern, sleek look makes it the perfect addition to any cockpit and readability is, as with all Koso instruments, excellent. Product Information: Speedometer: 0 - 360...
Reference: W539.40.60
Brand: Wurth
Heavy duty hose clamp, can be used on most 40-60mm Air filters.
Reference: 465590
Brand: Tun'R
Beautiful F1-look mirror with real mirror glass and a short body. Fits both left and right side, as it comes with a fitting piece to adapt to left hand thread. Fits all scooters with M8 thread size and is available in a choice of colours. New enhanced quality and brighter colours!
Reference: 303339
Brand: Malossi
With this new transparent float bowl from Malossi, changing the main jets becomes dead easy. Thanks to a small round screw cap, you can easily replace the main jets and also spare the float bowl gasket. The transparent float bowl also lets you see at first glance if it contains fuel. Attention: only for DellOrto PHBG carburettor!