No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Gasket set for the Stage6 R/T FL70 cylinder. These gaskets come in...
Reference: A366414
Brand: Tun'R
Front Fairing Spoiler for Yamaha pre-bug Zuma. It is mounted in place of the original fairing panel.
Reference: 245.013
Brand: Polini
Single set of Polini clutch springs. Tuned engines usually reach their maximum power only higher up the rev range, the engine will suffer from a loss of power at low revs though, resulting in slower acceleration. Polini offers this set of clutch springs in different strengths for stock clutches to bridge the gap in the power band.
Reference: 203.0029
Brand: Polini
Polini EVOLUTION air filter. About 20 cm long and with two layers of special foam with different pore sizes. Ultimate racing optic and high air flow. 90° connection with a connection size of 38 mm; unfortunately it's quite loose with 17-21mm carbs. This air filter should only be used if there is not enough room for air filters with straight connection,...
Reference: TH39ADIO-1630
Brand: Scootertuning.ca
Reference: BT13877
Brand: Scootertuning.ca
This isolator sits between the intake manifold and the cylinder head and can often cause poor revving and engine running when it no longer seals properly.
Reference: 5519221
Brand: Malossi
Reference: 5717218
Brand: Malossi
The range of Malossi engine crankcases now welcomes a new and precious addition: Air Force, the new engine crankcase compatible with C-One, RC-One and the original Piaggio extended crankcase. It's called Air Force because its strength lies in the ability of simultaneously allowing entry of a greater mass of air, channelling it precisely on the...
Reference: S6-31RT-PWK28
Brand: Stage6
The R/T PWK carburetor is a new development from KOSO, produced exclusively for Stage6. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. The outside measurements and the size of the connection to the intake manifold have been reduced so that mounting is easier. Furthermore, the black racing finish...
Reference: ESIL034WSRD
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: VC18607
Brand: Scootertuning.ca
Replacement speedo cable in original dimensions for scooters. Design and dual-side mounts match the original speedo cable. Length from end to end: 102.5cm. Replaces OEM-No.: 00G01605021 / 0DN00G01605021 Also suitable for the following models: DERBI 100 ATLANTIS 00-06 PIAGGIO 100 DIESIS 01
Reference: 1000-1286.10
Brand: NCY
High performance rear shock from NCY. With a stiffer recoil, and adjustable preload, this is a must have upgrade to your stock or performance machine! 10 inches eye to eye, Top Eye 20mm wide, Fork 20mm wide. Note: If you using stock air box, minor fitment modifications may be needed depending on model year
Reference: P9855
Brand: Replay
ATTENTION! Does NOT fit Pre-1998 models with front drum brake.
Reference: S6-35070
Brand: Stage6
In addition to the air filter inserts for your original air filter boxes, we can offer you universal mats from Stage6. So if you can't find any air filter inserts for your scoot, you can simply get one of these and cut it to size. The two layers of the filter ensure an ideal air flow coupled with a maximum of filtering performance. Available in 2 sizes.
Reference: 277863
Brand: Doppler
Doppler S2R intake pipe for Minarelli Horizontal with 23mm connection (Dellorto 12-21mm carburettor)
Reference: 90468-12006-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: BT27505
Brand: Scootertuning.ca
Replacement motor bearings for scooters. Dimensions (Internal x External x Width): 10x30x30mm
Reference: KO-BA041000
Brand: Koso
The DB01RN is Koso's latest multi-functional dashboard instrument. It combines all the functions you need for offroad use and everyday riding and it comes with E-mark / homologation. Its modern, sleek look makes it the perfect addition to any cockpit and readability is, as with all Koso instruments, excellent. Product Information: Speedometer: 0 - 360...
Reference: 465590
Brand: Tun'R
Beautiful F1-look mirror with real mirror glass and a short body. Fits both left and right side, as it comes with a fitting piece to adapt to left hand thread. Fits all scooters with M8 thread size and is available in a choice of colours. New enhanced quality and brighter colours!
Reference: 166.0076/12
Brand: Polini
(12mm Gudgeon pin). The Polini Sport 70cc is a very durable high-performance cast iron cylinder for everyday use. This kit is known for its impressive top speed considering the category it belongs to, and even more for its excellent performance at low and mid rpm range. The perfect cylinder if you want to pull wheelies! It can be used with the original...
Reference: NK102.03
Brand: Naraku
Complete set of quality crank oil seals from Naraku, for scooters with 50cc Kymco 4-stroke and GY6 engines. Set contains all the important oil seals found in the engine. A must for engine overhauls. Purchasing individual shaft seals is usually more expensive, and when working on the engine or the gearbox, seals should always be replaced.
Reference: BT13024
Brand: Scootertuning.ca
Standard v-belt replacement for original part. Suitable for vehicles with 10” wheels. Made in China. Dimensions: 669-18-30
Reference: 1100-1288.6
Brand: NCY
GY6 171cc (61mm) Cylinder Kit From NCY. Give your GY6 based scooter some serious power with this bolt on 171.3cc kit for most GY6 125/150cc engines. With this 61mm cylinder kit for the GY6 engine you dont have to bore the crankcase. With most 61mm big bore kits, you have to bore the crankcase to make room for the 65mm cylinder base external diameter but...
Reference: BM04801
Brand: Scootertuning.ca
Stronger 11 teeth starter motor for PGO & Genuine scooters. This starter is stronger than the standard one and can pull smaller bigbore cylinders without any problems. Supplied without cable!
Reference: TH12ADIO50-54
Brand: Scootertuning.ca
Honda Dio/Elite 54mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with 52.4mm stroke Crankshaft.
Reference: MF78.19803
Brand: Motoforce
We can offer you a high-quality pulley from Motoforce at a bargain price.
Reference: ESIL034KSRS
Brand: Yasuni
Replacement Silencer for Yasuni exhaust!
Reference: TH52ADIO-130
Brand: Scootertuning.ca
130mm stainless cylinder studs for Honda Dio/Elite AF16-AF18.
Reference: 071703/1
Brand: Athena
This is the complete gasket set for Athena Sporting 50cc & Stage6 alu 50cc cylinders. Check the picture to see which gaskets are included.
Reference: SCHS-200
Brand: Scootertuning.ca
Everything you need for a complete rebuild of a Minarelli Horizontal Engine. The pack includes from top to bottom ;Rear Brake Camshaft, Starter Motor, Fan cooling cover, Intake, Gearbox cover, Crankcase and CVT cover screws.12.9 Grade, zinc plated finish.
Reference: 3B3-WF514-10-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: TH18ADIO50-AL1
Brand: Scootertuning.ca
Cylinder base gasket 1mm for AF16-AF18 50mm cylinder kit.
Reference: KW13974
Brand: Scootertuning.ca
Complete oil pump for Minarell-based 2-stroke engines from CPI, Keeway, Generic, Mawi, Longija etc. Delivery as shown. Also suitable for Adly 50cc 2-stroke engines.
Reference: TH12ADIO50-50
Brand: Scootertuning.ca
Honda Dio/Elite 50mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with 43.2mm stroke Crankshaft.
Reference: 7714147
Brand: Malossi
Malossi Wing Bell 2010 with self-cleaning bores and enlarged gaps for better cooling properties. The outer cooling ribs have been kept unchanged; they still do a great job of keeping down the temperature.