No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
How best to exploit the Minarelli...
Reference: MF10.16801
Brand: Motoforce
This is the complete gasket set for original or 50cc replacement cylinders. Check the picture to see which gaskets are included.
Reference: P11349
Brand: Replay
Reference: NK800.14
Brand: Naraku
These Speed-up shims influence the length of the variator sleeve. Lengthening can improve acceleration and shortening can increase top end speed. Measure the length of the sleeve before installing the length of your choice. Kit contains 30 Control shims with 10 of each of the following: 0.1mm, 0.2mm and 0.5mm thick
Reference: KT00088
Brand: DR
Looking for a bargain-priced durable cylinder for everyday use? If you are willing to use a cylinder with higher capacity, we recommend the 70cc cast-iron cylinder from DR's. Don't let the name "Evolution" fool you though - it has nothing to do with the Polini cylinder of the same name. The DR offers good workmanship, rpms and acceptable performance at a...
Reference: 166.0076/12
Brand: Polini
(12mm Gudgeon pin). The Polini Sport 70cc is a very durable high-performance cast iron cylinder for everyday use. This kit is known for its impressive top speed considering the category it belongs to, and even more for its excellent performance at low and mid rpm range. The perfect cylinder if you want to pull wheelies! It can be used with the original...
Reference: KW13974
Brand: Scootertuning.ca
Complete oil pump for Minarell-based 2-stroke engines from CPI, Keeway, Generic, Mawi, Longija etc. Delivery as shown. Also suitable for Adly 50cc 2-stroke engines.
Reference: 4VP-H5720-00-00
Brand: Yamaha
Yamaha OEM replacement part. This is the assy that prevents the engine from running out of oil. It activates the oil warning light in the dash. We have seen very often oil leaking from there. Unexpensive replacement that can save your motor.
Reference: 3602-0112
Brand: Ipone
100% Synthetic - API TC Samoura‹ Racing is THE 100% synthetic, ester-based lubricant for 2-stroke motorcycles, designed for sports riding. Its formula ensures maximum performance and optimal engine lubrication. A strawberry-scented version of Samoura‹ Racingis available. Advantages Excellent lubricating properties allow reduced oil consumption. Integral...
Reference: LV7470
Brand: Leovince
Leovince`s 4-stroke exhaust system features a motocross-style silencer with a coarse but not too loud 4-stroke sound. This very system is delivered with e-mark and is legally allowed on public roads. The exhaust, as usual is very well made and mounting hardware is included. The silencer was borrowed from the LeoVince Exhaust Pitbike, and thus delivers...
Reference: BM00016
Brand: Scootertuning.ca
Remplacement gearbox cover gasket for PGO and Genuine Scooter.
Reference: BT22008
Brand: Scootertuning.ca
Horn for 12V on-board computers. Delivery as shown.
Reference: 176.1284
Brand: Polini
Polini brake shoes for rear drum brakes with excellent durability and braking performance. Ideal as an OEM replacement. Dimensions: 110x25mm
Reference: 201.0169
Brand: Polini
Polini carburetors are lodged a flat slide lightweight chrome alloy, highly resistant to abrasion and wear, which improves slip. Polini carburetors allow more efficient to have every rpm benefits. Providing better acceleration and recovery, also improving the extension at maximum speed and optimizing the power output. They provide a simple adjustment with...
Reference: 7719100
Brand: Malossi
Low-cost replacement clutch bell from Malossi. Shaky drive from standstill could indicate an issue with the clutch bell. This will lead to damage in the clutch area if ignored. Malossi offer a well-engineered clutch bell for standard and tuned engines. We recommend the Wing Bell model for racing.
Reference: TH18ADIO50-51
Brand: Scootertuning.ca
Replacement Gasket set for 50mm AF16-AF18 Cylinder kit.
Reference: MOT111764
Brand: Motul
Ready to use coolant liquid. New hybrid technology for today’s bikes. Protection -37°C.
Reference: 16782
Brand: Scootertuning.ca
Rectifier / Controller changes the AC into DC on a 12V board. This prevents bulbs from burning out. Exposure to high temperatures means bulbs often fail. If the rectifier goes, the ignition system can falter, the bulbs burn through, and the headlight flickers.
Reference: MOST3000
Brand: Most
The Most reedvalvespacer is the ideal solution to the volume of the casings. Depending on your engine configuration, a flat block may work better than the inclined version. Like all Most products, this hold has been tested, tortured and validated by the Most R&D Garage!
Reference: 93306-00316-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 117394
Brand: Malossi
Replacement Malossi gasket set 70cc [MHR replica] - Kymco/Sym upright
Reference: MOT105960
Brand: Motul
Technosynthese® lubricant designed for 4-Stroke scooter engines. Specifically designed for scooters and maxi-scooters fitted with 4 stroke engines, any engine displacement, with or without catalytic converters, with wet clutch. All scooters used for daily commuting and urban riding. Suitable for all type of gasoline fuels, leaded or unleaded, biofuels....
Reference: NK900.44
Brand: Naraku
Naraku is the first manufacturer to offer spring seats with ball bearings, which minimizes the twisting effect of the torque springs. Definitely an interesting solution for stronger tuned engines that face problems when they are reaccelerating and variator and converter shift down. Available for Minarelli, Piaggio, Peugeot, Kymco, Sym and Honda. Please...
Reference: 98517-06012-00
Brand: Yamaha
Yamaha OEM replacement part. Pan head screw that is used to keep the crankshaft seal holder in place.
Reference: 467755
Brand: Tun'R
High-quality fairing parts from TunR. The front mudguard are a stylish replacement parts available in 3 different versions. Hole distance: 16.5cm
Reference: NK800.05
Brand: Naraku
Variable tuning set for original variators and almost all tuning variators. The Speed-up shims can influence the length of the sleeve: an extension usually improves the acceleration and shortening increases the top speed. Before installation, be sure to measure the length of the original sleeve and then change the size of the speed-up sleeve with the...
Reference: 1CD-H3330-01-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 0307166
Brand: Tecnigas
High-torque exhaust in a subtle design with low sound levels. Provides considerably more top speed. For those who need a new exhaust and want more power but do not want to ride with a small and particularly sporty sounding exhaust on their scooter Very good torque curve and excellent performance on 50cc and 70cc Sports cylinder. This Tecnigas Silent Pro...
Reference: SCT-W034/12
Brand: Scootertuning.ca
Rear wheel 12x3.5'' for GY6 150cc engine using 4x90mm rear hub. This wheel can also be used as front wheel with our 4x90 fron hub. Attention! 4X90mm hub required!
Reference: 204.0931
Brand: Polini
Replacement piston for the Polini evolution 3 / 4 70cc cylinder kits
Reference: AS16512
Brand: Airsal
With the Airsal 70cc, you get an aluminium cylinder for the same price that would normally buy you a common cast-iron cylinder. It has a hardened chrome-nikasil bore, and due to the fact that it is made of aluminium it has better heat dissipation properties than the cast-iron version so that piston seizures are a lot less common. Unfortunately, high top...
Reference: NK901.18
Brand: Naraku
CNC milled Naraku racing clutch bell with 107mm inner diameter. The advantage of using this over the stock bell is the extremely low tolerance and high strength making distortion almost impossible. This bell provides clean and low vibration running up to the highest speeds with very good heat dissipation. Can be used on stock engines and highly tuned...
Reference: P19876
Brand: Artek