No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
Budget weights by Motoforce, choice of weights. Available in a range of...
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
Reference: KW15440
Brand: Scootertuning.ca
Complete Starter clutch including starter gear and bearing ring. The replacement kit is suitable for all Minarelli-based Chinese-built 2-stroke engines like CPI, Keeway, Generic, Mawi, Longija etc. with 16mm crank tail shaft. Delivery is as shown. If the starter clutch is damaged, it always makes sense to replace all of the components. In a starter clutch...
Reference: 28781
Brand: Scootertuning.ca
Replacement rubber cap for oil tanks on the 2 stroke Chinese scooters.
Reference: BT14247
Brand: Scootertuning.ca
Dowel pin set for 50cc GY6 engines Delivery contains: 6x dowel pins for M7 (cylinder, cylinder head) 6x dowel pins for M6 (engine cases, crankcase cover), 1x dowel pin M8 (gearbox cover).
Reference: 1200-1027.10
Brand: NCY
Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1500 rpm compression spring is specifically for the GY6. Measurements: Wire Diameter: 4.2mm /...
Reference: MF99.00067
Brand: Motoforce
Inserting exhaust springs takes quite a lot of strength. In order to prevent slipping of with the pliers, we recommend using this spring stretcher, which makes things a lot easier.
Reference: 248.029
Brand: Polini
Another contribution to the belt drive market by Polini, Kevlar fibre increases the maximum power this belt can transfer.
Reference: IP12478
Brand: Scootertuning.ca
Great price cylinder kit for air-cooled Piaggio engines. The cylinder kit is identical in size and performance to the original, making it an obvious choice for a road legal replacement. Top choice if you are looking for a replacement cylinder kit. Kit dispatched complete with all individual parts, but without cylinder head. Cylinder head can be ordered...
Reference: KO-BA003250
Brand: Koso
This fuel gauge from Koso is a neat addition to the LCD Mini Style series. These nifty little helpers are very compact, come with background illumination and can easily be mounted and connected to any vehicle. A simple tool monitor the content of the fuel tank. Big bars allow for easy reading. Operating voltage: DC 12V. Size: 60x30x11.5 mm
Reference: S6-0125
Brand: Stage6
Fuel hose with a length of 50cm, interior diameter 6mm
Reference: BZA30435
Brand: Scootertuning.ca
Kickstart pinion retainer spring for Piaggio 50 to 150cc scooters.
Reference: MVT-CL03
Brand: MVT
After much dyno and track test, MVT technicians created the new SR and SC intakes. High quality intake systems including reedblock. This intake system has a high-performance valve for large engine, the shape and slip surface ensures an immediate response and a significant acceleration rate. Available in 23mm (Polini CP, Dellorto 12-21mm) and 32mm (PWK).
Reference: 3B3-E1391-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 90179-10609-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: NK390.16
Brand: Naraku
Tuning CDI unit with no rev limiter from Naraku. Derestricts your scooter and makes it revvier. 2009 V.2 unit adds the extra few mph that a big bore kit doesn’t. Attention! On some inductive rev counters (e.g. Yager 50GT) interference can occur with the rev counter. Using interference-resistant plugs can help this, but there may still be display issues....
Reference: IP15542
Brand: Scootertuning.ca
Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.
Reference: BT50008
Brand: Scootertuning.ca
Valve cover gasket rubber made - GY6 50ccm
Reference: M-P0124/B
Brand: Malossi
Complete engine package for Yamaha Bws 2002-2011. Package include Malossi Sport 70cc cylinder kit, Variator Malossi multivar, Exhaust Yasuni R, Main jet set 80-102 6mm, Spark plug BR9HS, Malossi 16x13 7.0g roller and Malossi white torque spring (Soft).
Reference: 241.687
Brand: Polini
The Polini Maxi Hi-Speed is one of the strongest variators in maxi scooter range. The emphasis was placed on the construction of the roller tracks, which optimally exploit the available power band of the engine resulting in better acceleration and a little more top speed.
Reference: 117570
Brand: Malossi
This is the complete gasket set for Malossi sport,replica and racing 70cc cylinders. Check the picture to see which gaskets are included.
Reference: 6614705.A0
Brand: Malossi
For optimum engine setting, Vario weights should be used. The high quality finish of the Malossi roller weights result a high stability and a self-lubricating effect. They are available in different weight selection. The set consists of 6 or 8 rolls, depending on the model.
Reference: STR-687.12/CR
Brand: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: LMCR8EH-9
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: EKP-011
Brand: Motoforce
In order to connect a boost bottle, you need a Y- or T-connector, if it is not already included in the package. It can also of course be used to split a fuel hose into two directions.
Reference: S6-35001RO
Brand: Stage6
Racing air filters in red, blue and yellow with a low-porosity foam for an optimum filtering effect. These Stage6 air filters are available with a length of 7cm or 20cm and have a fitting diameter of 35mm, which fits for all 12-21mmDellorto and Arreche carburetors. The longer ones cannot be used with all scooter models, but they ensure a better airflow.
Reference: 3KJ-27481-00
Brand: Scootertuning.ca
Reference: MOST500012
Brand: Most
In partnership with the company KRM and Athena, Most offers here the first cylinder kit! A high quality product with exceptional performance in low, mid and high rpm. This 70cc cylinder kit is suitable for Minarelli Vertical Engine. The cylinder is made of aluminum with bore of 47.6 mm, 5 transfers port and oval exhaust port. The conception of the inlet...
Reference: TRT-4000
Brand: 2Fast
2 Fast offers here 44mm stroke with 90mm rod Crankshaft and Needle bearing for shaft ø14mm. Weight 1470 grams. The diameter is 76mm masses must be so boring casings to 77.20mm. The tail of the crankshaft is standard in ø13mm fluted.
Reference: NK901.21
Brand: Naraku
Naraku Racing variator for Honda Zoomer/Ruckus scooters for higher top speed. Comes with a set of 16x13, 5.5g weights. The original sleeve can be retained.
Reference: L-KIES025
Brand: Kiesler
Ultra wide rim kits from Kiesler in Aerox/ Nitro rim design. Not only do they provide an extremely cool look when combined with a 140 sized tyre, you can also be sure that your scoot has optimal tire-to-road contact! Brushed rim base and wheel spider to round off the dragster style. Size: 5x13" Please use a tube with short, angled valve.
Reference: S410130320006
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. The perfect part for all sports and Midrace cylinder.
Reference: TH10BDIO50-1500
Brand: Scootertuning.ca
Reference: 200.0313
Brand: Polini
The Polini Speed is an unobtrusive sport exhaust with European homologation. It’s completely made of steel, painted in matt black, and equipped with a heat shield. Like comparable touring pipes, it is suitable and offer good performance with original or 70cc sport engines. All parts necessary for mounting are included in the delivery. NOTE: Like other...
Reference: NK900.22
Brand: Naraku
Naraku sports variator for PGO scooters. Delivery includes variator unit with counter pressure plate, 3 sliders and a variator sleeve. This variator features an insertion in the slider bearings, otherwise found on the Polini Overrange variators. This ensures better heat dispersion and collects excess drive belt particles from the sleeve. This makes for...
Reference: SCT-P001/BK
Brand: Scootertuning.ca
4 high quality pencils packaged in a carton cylinder tube. Perfect for school or doodling!