No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
Polini has revised and expanded its range of roller kit made for Scooter...
The thermal grade of the spark-plug is of prime importance with tuning...
Replacement Piston for the Motoforce racing 70cc Minarelli Horizontal
The bell is CNC-machined from a single piece rather than pressed like...
Yasuni's Carrera range consists of...
Reference: STR-687.12/CR
Brand: Str8
The STR8 LED Mini II indicators are the new, even smaller version of the LED Mini indicators. Despite their small size, the 6 LEDs provide as bright light as their predecessors. The indicators come with an E-mark so they can be legally used on the street.Attention: On some scooters, LED indicators don't work correctly; in that case you will have to...
Reference: S410130320006
Brand: Athena
High Primary Compression Crankshaft made in Italy by Athena. High quality piston pin needle bearing are include in the package. Approved to reach up to 16.000 rpm. The perfect part for all sports and Midrace cylinder.
Reference: BZA30435
Brand: Scootertuning.ca
Kickstart pinion retainer spring for Piaggio 50 to 150cc scooters.
Reference: LMCR8EH-9
Brand: NGK
The thermal grade of the spark-plug is of prime importance with tuning kits; if the wrong grade is used the kit will overheat or the spark-plug will foul. A hotter spark plug transfers more heat to the cyl head, which may lead to piston seizures. The Corsa kit comes with the correct spark-plug, for other kits we recommend the plug listed here. As a rule...
Reference: EKP-011
Brand: Motoforce
In order to connect a boost bottle, you need a Y- or T-connector, if it is not already included in the package. It can also of course be used to split a fuel hose into two directions.
Reference: MF83.107
Brand: Motoforce
The design with orange cooling fins does look great, but what's more important is that the open design with many cut-outs and the additional shrunk-on cooling fins lead to optimal heat dissipation and better cooling. The cooling fin rim also reinforces the bell, preventing deformations which can cause the clutch to grip unevenly.
Reference: 0616248
Brand: Malossi
Replacement Oring set for the MHR Overange 2013 (La furia rossa) rear pulley.
Reference: S6-35001RO
Brand: Stage6
Racing air filters in red, blue and yellow with a low-porosity foam for an optimum filtering effect. These Stage6 air filters are available with a length of 7cm or 20cm and have a fitting diameter of 35mm, which fits for all 12-21mmDellorto and Arreche carburetors. The longer ones cannot be used with all scooter models, but they ensure a better airflow.
Reference: IP15542
Brand: Scootertuning.ca
Recoil spring for kickstarter levers on CPI, Keeway, Generic and Minarelli-based Chinese-built 2-stroke engines.
Reference: IP23549
Brand: Scootertuning.ca
Pressure-activated petrol tap for scooters with Chinese-made, Minarelli-based engines (1E40QMB) such as CPI, Keeway etc. A petrol tap failure can often lead to starting difficulties and cut-outs whilst riding. When the membrane is stuck, either no, or not enough, fuel passes through. To remedy this you need to change the whole tap. Please compare this...
Reference: TFC-015
Brand: TFC
Reference: W549.25.40
Brand: Wurth
Heavy duty hose clamp, can be used on most 32mm intakes, 28-35mm Air filters.
Reference: VCR-SD970/RE
Brand: Voca
Set of CNC machined handlebar caps VOCA Racing. High quality alloy handlebar caps available in anodized black or anodized red. The laser engraved logotype and the black anodized screw of the cap complete the very clean VOCA design. The VOCA handlebar caps protect the endings of the grip and assure a special look of your handlebar. Easy fitting! You only...
Reference: SW-H30S
Brand: Sunworld
Sunworld PWK Carburetor is a very high precision Carburetor. The intake tract is milled off to offer better airflow and thus contribute to better throttle response. They have been used for several years in the race and have been proven. The carb is of course equipped with a power jet; and in order to easily find the optimal adjustment, instructions are...
Reference: BT13853
Brand: Scootertuning.ca
Complete engine gasket set for all Chinese-built 4-stroke GY6 139QMB/QMA scooters with 12” wheels and short engine block; v-belt length 729mm, crank-gearbox input shaft 22.5cm. ATTENTION: Crankcase cover gasket does not fit on 10” wheel vehicles. There is a specific set for these models in our range. Set does not include crank seals; we offer these in a...
Reference: GY14645
Brand: Scootertuning.ca
Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.
Reference: CY00905
Brand: Scootertuning.ca
Replacement Clutch nut for PGO and Genuine scooters.
Reference: MOST500012
Brand: Most
In partnership with the company KRM and Athena, Most offers here the first cylinder kit! A high quality product with exceptional performance in low, mid and high rpm. This 70cc cylinder kit is suitable for Minarelli Vertical Engine. The cylinder is made of aluminum with bore of 47.6 mm, 5 transfers port and oval exhaust port. The conception of the inlet...
Reference: 1200-1154.5
Brand: NCY
The ultimate variator for your GY50 transmission & Honda Ruckus! This beauty is lighter than any other variator on the market and at 95mm, is ideal for all types of riding. The specially coated roller tracks prevent debris accumulation that causes roller weights to flat spot, leading to extended roller weight life and consistently smooth transitions.
Reference: L-KIES025
Brand: Kiesler
Ultra wide rim kits from Kiesler in Aerox/ Nitro rim design. Not only do they provide an extremely cool look when combined with a 140 sized tyre, you can also be sure that your scoot has optimal tire-to-road contact! Brushed rim base and wheel spider to round off the dragster style. Size: 5x13" Please use a tube with short, angled valve.
Reference: 200.0313
Brand: Polini
The Polini Speed is an unobtrusive sport exhaust with European homologation. It’s completely made of steel, painted in matt black, and equipped with a heat shield. Like comparable touring pipes, it is suitable and offer good performance with original or 70cc sport engines. All parts necessary for mounting are included in the delivery. NOTE: Like other...
Reference: KO-BA038010
Brand: Koso
The KOSO DB-03R is a first-class multi-functional speedo. All the information you need for daily riding are integrated into the display, and thanks to the blue background illumination, they are easily readable. The adjustable rev reading lets you adapt the instrument to your engine’s characteristics.
Reference: SCT-P001/BK
Brand: Scootertuning.ca
4 high quality pencils packaged in a carton cylinder tube. Perfect for school or doodling!
Reference: S6-0512/W
Brand: Stage6
Stage6 rim stickers in black and white on 3M reflective adhesive film for all 10 and 12/13 inch rims. Their exactly rounded shape allows for a very simple and precise positioning on the rim. The set consists of four rim stickers and two small, rectangular stickers.
Reference: STR-052.74
Brand: Str8
New reinforced quality. If you think that TNT grids have so far been way too flimsy, you will be thrilled: 2 new anodised aluminium grids in different sizes and hole patterns. Just the right thing to attach behind body apertures such as radiator vents. Can easily be handled, available in 12 great colours.
Reference: FMF12-002
Brand: FMF
Did you know a freshly packed silencer or muffler actually restores power? Our Performance Packing is comprised of fine, blended interwoven fiberglass fibers made to FMF’s specifications for high heat resistance, great sound attenuation and optimum performance and longevity. Look for FMF’s distinctive red performance packing.
Reference: TRS-KIC/BK
Brand: TRS
Is your cheap plastic ignition cover broken or looking for something fancy but don't wanna spend an arm and leg. We have them in stock. CNC Machined out of 6061 Billet Aluminum, and comes in a raw finish so that you can easily finish it off how you like! Easily polished, painted, powder coated to match your bike!
Reference: M-P005
Brand: Malossi
Complete engine package for PGO and Genuine Scooter. Package include Malossi Sport 70cc cylinder kit, Variator Malossi multivar, Exhaust Tecnigas Silent pro, Main jet set Stage6 82-100 4mm, Spark plug BR9HS, Malossi 16x13 roller and Malossi yellow torque spring.
Reference: 060938411
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segements. The mounting of the silencer was changed and it now comes with a black rear silencer.
Reference: 19730
Brand: Scootertuning.ca
Replacement bulb for 2-wheelers with BA15S base. 12V/5W. Please check image prior to ordering.
Reference: 070496
Brand: Athena
The ATHENA springs are perfect for your original or performance variator and suit perfectly the Athena ones. They are provided in different colours, indicating in kilograms the applied elastic strength.
Reference: MF78.14002
Brand: Motoforce
We can offer you a high-quality pulley from Motoforce at a bargain price.
Reference: MF96.00031
Brand: Motoforce
Special MotoForce Oil Seals for crankshaft Piaggio NRG / Typhoon OEM quality oil seals, basically identical to original parts. These are the seals that usually come with a new crankshaft; if you want to / have to replace them and don't want to spend much money - MotoForce has them.
Reference: 1CD-F3191-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.