No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Malossi offer here great performance...
Reference: TUB911CK
Brand: Yasuni
Yasuni's Carrera range consists of powerful exhausts in the high end section. The current top model is the Carrera 30, or C30 for short. The silencer comes in the well-known Kevlar or carbon design and expansion chamber and silencer mounting have only been changed slightly in comparison with the former C21. The manifold is welded together of many pieces....
Reference: 81130-GEZ-010ZF
Brand: Honda
Replacement OEM Honda Parts.
Reference: TRS-TLI003
Brand: TRS
This is the TRS honda Grom / MSX-125 flush mount tail light with integrated turn signals. Great way to clean up the rear of your honda grom! When switching to led make sure you upgrade your flasher relay to the orange led flasher so the signals do not stay lit when blinker is on. This looks great when you eliminate the oem tag bracket and want the sleeker...
Reference: 8350A-GS7-000/PU
Brand: Scootertuning.ca
Reference: IP23549
Brand: Scootertuning.ca
Pressure-activated petrol tap for scooters with Chinese-made, Minarelli-based engines (1E40QMB) such as CPI, Keeway etc. A petrol tap failure can often lead to starting difficulties and cut-outs whilst riding. When the membrane is stuck, either no, or not enough, fuel passes through. To remedy this you need to change the whole tap. Please compare this...
Reference: GY14645
Brand: Scootertuning.ca
Original intake manifold for all GY6 125/150cc 152/157QMI engines. Delivery includes clamp and O-ring. 24mm opening.
Reference: RH-172
Brand: Ruckhouse
Reference: DIO-01050-A
Brand: Taida
Taida Honda Dio 50mm big bore cylinder kit for AF16-18 Engine. This kit is made to use with the dio standard stroke crankshaft (41.4mm).
Reference: 209.0469
Brand: Polini
Replacement Gasket for the 79cc 4V Polini cylinder kit.
Reference: 1112089
Brand: Malossi
Replacement Gasket set for Cylinder kit Malossi I-Tech 70cc Aprilia with Piaggio engine.
Reference: L-KIES025
Brand: Kiesler
Ultra wide rim kits from Kiesler in Aerox/ Nitro rim design. Not only do they provide an extremely cool look when combined with a 140 sized tyre, you can also be sure that your scoot has optimal tire-to-road contact! Brushed rim base and wheel spider to round off the dragster style. Size: 5x13" Please use a tube with short, angled valve.
Reference: IP34883
Brand: Scootertuning.ca
Value replacement crankshaft for scooters with vertical Minarelli engines. Shipped with small end bearing included.
Reference: 070496
Brand: Athena
The ATHENA springs are perfect for your original or performance variator and suit perfectly the Athena ones. They are provided in different colours, indicating in kilograms the applied elastic strength.
Reference: 248.029
Brand: Polini
Another contribution to the belt drive market by Polini, Kevlar fibre increases the maximum power this belt can transfer.
Reference: 069200/1
Brand: Athena
High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of mechanical stresses. This aluminium cylinder is casted in steel...
Reference: S6-7516602
Brand: Stage6
The cylinder that has been breaking records! It set new best times in the Italian Open Cup and also broke the 6-second barrier in scooter dragracing. Regarding transfer port layout, Stage6 has maintained GP standards, refraining from cross-section reducing 7- or 8-port designs. After all, "more" isn't necessarily "better". The 47.6 mm bore conforms to the...
Reference: 01131246
Brand: Airsal
With the Airsal 70cc, you get an aluminium cylinder for the same price that would normally buy you a common cast-iron cylinder. It has a hardened chrome-nikasil bore, and due to the fact that it is made of aluminium it has better heat dissipation properties than the cast-iron version so that piston seizures are a lot less common. Unfortunately, high top...
Reference: 4517008
Brand: Malossi
Malossi Mudguard for the C-one and RC-One engine.
Reference: FMF12-002
Brand: FMF
Did you know a freshly packed silencer or muffler actually restores power? Our Performance Packing is comprised of fine, blended interwoven fiberglass fibers made to FMF’s specifications for high heat resistance, great sound attenuation and optimum performance and longevity. Look for FMF’s distinctive red performance packing.
Reference: SCT-GC25
Brand: Scootertuning.ca
Don't know what to get for your loved ones? Our gift card is the ideal choice to let your loved one choose from a selection of more than 3000 products! Once you order the gift card, we will email you within 24 hours a printable gift certificate that you can fill in.
Reference: FLP-020
Brand: FLP
Maybe your ruckus is sitting low and you need some ground clearance or maybe you want to raise your gas tank and add some leds around it. This kit will raise your tank .750 – 3/4”. Includes : 4 M6 CNC dress up washers, 4 M6 x45 stainless bolts, 4 CNC stand off spacers and 4 lock nuts
Reference: TRS-MFB/SH
Brand: TRS
Looking to upgrade your stock frame bolts, we can offer here the correct thread and pitch for the honda Ruckus Frame. Grade 12.9 steel zinc plated for corrossion resistance. Include stainless steel washers.
Reference: KW16658
Brand: Scootertuning.ca
Complete OEM-quality alternator for Minarelli-based 2-stroke engines, suitable for Keeway, CPI, Generic, Longjia, Mawi etc. There are currently 4 versions in use. This is the 3 pin main connector, and 3 single cables. Delivery includes base plate. Rotor must be ordered separately.
Reference: NK490.01
Brand: Naraku
Naraku puller for alternator magnet wheels. Screws onto the existing rotor thread and is tensioned with the tensioning bolt. Light taps with a hammer on the tensioned bolt help to release the alternator. A very useful tool for this specific job.
Reference: 060938411
Brand: Tecnigas
This is the successor of the Tecnigas Next. Its diffuser now consists of two segements. The mounting of the silencer was changed and it now comes with a black rear silencer.
Reference: KO-BB026001
Brand: Koso
Fully-fledged universal speedo with state-of-the-art technology, homologated for ATVs, motorbikes and scooters. With selection of km/h or mph and new tyre circumference adjustment (adjustable 1000–2500mm). With the optionally available brackets, it can easily be mounted to practically all models.
Reference: RAD-28*13
Brand: Taida
0
Reference: 028400B
Brand: Malossi
Intake Manifold Minarelli Vertical d=20,5x23mm PHGB 12-21mm Malossi
Reference: 66161
Brand: Piaggio
Original Piaggio oil pump drive belt. Suitable for Piaggio, Gilera and other scooters with Piaggio engines (e.g. some Aprilia and Derbi scooters).
Reference: GY6-BEAR-C
Brand: Taida
Taida gearbox bearing set for 125 and 150cc GY6 engines (152/157QMI).
Reference: 143006476
Brand: Airsal
Replacement gasket set for the Airsal Sport 70cc CPI GTR.
Reference: S6-72166ET08
Brand: Stage6
This is the complete gasket set for 70cc Stage6 Streetrace cylinder kit. Check the picture to see which gaskets are included.
Reference: MF19.14045
Brand: Motoforce
If you're looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.
Reference: S6-0571/BK
Brand: Stage6
Stage6 now offer banner with their logo on it! Excellent for give your garage racing style!
Reference: BZA30265
Brand: Buzzetti
Replacement main stand from Buzzetti for Minarelli 50cc 2 stroke engines such as MBK, Booster R, Booster Spirit, Booster NG, Yamaha BW´s R, BW´s Original, BW´s NG, Aprilia Amico, SR and Italjet Pista. Supplied as shown.