No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: 01073350
Brand: Airsal
This red painted Airsal Racing Xtrem cylinder gets an amazing 88cc capacity from its 50mm bore, as long as you use it in conjunction with a 45mm stroke crankshaft from Airsal. As can be expected from a high-end cylinder, it comes with a coated piston made by Vertex featuring a single ring. The original 10 mm small end bearing would have been too feeble,...
Reference: 246.032
Brand: Polini
Twin cooling of the transmission group with the Air Speed Drive developed by Polini. By using the Air Speed Drive you improve decisively the aeration inside the crankcase and consequently it increases both the engine performance for long distances covered and the belt life. The Polini Speed Drive pulley for Piaggio and Minarelli include the Air Speed...
Reference: RH-C077
Brand: Ruckhouse
Honda Grom Carbon Cockpit Cover. Plain weave glossy finish Carbon.
Reference: 5MJ-H3980-11-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 1CD-F834V-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 3601-0562
Brand: Ipone
SCOOT 4 ensures optimum lubrication of your 4-stroke scooter. Semi-synthetic, it guarantees good engine protection. Its FUEL ECO formula allows you to save fuel.
Reference: NK100.19
Brand: Naraku
Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly suited to the Naraku 47mm cylinder sets and Chinese 47mm cylinder sets.
Reference: BT13875
Brand: Scootertuning.ca
Timing chain tensioner guide for GY6 50cc engines 139QMB/QMA
Reference: BM0446002
Brand: Stylepro
Replacement Ignition lock switch for PGO & Genuine scooters. Please compare with the picture to make sure it's the right lock switch.
Reference: MF19.14047
Brand: Motoforce
If you’re looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.
Reference: 3413581.B0
Brand: Malossi
Replacement Piston for Malossi I-Tech 70cc 4 stroke cylinder kit.
Reference: DIO-Manifold-G08
Brand: Taida
Taida Performande honda Dio Big Valve Intake with 40mm connection. Allow to use PWK carburetor from 33mm to 36mm. Attention! Machining required.
Reference: P-PL010/B
Brand: Polini
Complete engine package for Minarelli Vertical. Package include Polini Sport 70cc cylinder kit, Variator Polini Hi-Speed, Exhaust Yasuni Z, Main jet set 80-102 6mm, Spark plug BR9HS, Polini 16x13 6.9g roller and Polini soft torque spring.
Reference: MF75.13901
Brand: Motoforce
New version. The variator from the Motoforce Racing series sets new standards when it comes to price performance ratio. The performance has been visibly improved, offering even better shifting characteristics. The variator comes with two or three weight sets, which gives a good basis for adjusting the vario to the set-up of the other scooter parts.
Reference: SCT-TS004
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with our new 2015 logo!
Reference: S6-3219040/VT
Brand: Stage6
This vulcanised two-reed block completes your Stage6 setup and is ideal to assist cylinder charges with 19mm carbs and more. The layout has been adapted from the reed valve of the well-known intake system. Included in the package are the reed valve made of fuel-resistant Viton® as well as 0.35mm Stage6 carbon reeds, 0.4mm fibreglass reeds and three...
Reference: T9910060
Brand: Top performances
This is the complete gasket set for 70cc Top Performances Trophy and due-plus cylinder kit. Check the picture to see which gaskets are included.
Reference: SCT-RR6GY6
Brand: Scootertuning.ca
The rectifier/controller converts the alternating voltage from the alternator into the DC for the on board computer. This keeps the battery charged and ensures that bulbs do not blow etc. This piece is exposed to extreme temperature loading and can often become damaged. If the rectifier/controller is defective, the battery is constantly empty and on some...
Reference: GY20956
Brand: Scootertuning.ca
Rotor/magnet wheel for alternators. Alternators are currently available with 6 or 8 coils. Please check your original item to check which one you require! Also known as the fly wheel mass - this item is for 6 coil variants.
Reference: S6-030100
Brand: Stage6
This special tool is ideal for the Stage6 R/T CNC-type clutch bells. The bell has two indentures in the cooling ring where this tool can be inserted to grip and lock the bell and undo the screws without having to resort to an impact screwdriver.
Reference: MXS920
Brand: Scootertuning.ca
CNC Aluminium wheel adaptor that allow scooter with 3x80 disc brake rear hub to use 4x110 wheel. The perfect part to use our fatty wheel on Aerox, Aprilia SR50 minarelli and Malaguti scooters.
Reference: SCT-1261272
Brand: Ruckhouse
Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.
Reference: 538008
Brand: Malossi
High quality crankshaft by Malossi. HPC stands for high primary compression, or in plain English, it's a fullcircle crankshaft. Better crankcase pumping leads to more power higher up the rev-range with slightly reduced bottom end power though. The 12mm version comes with a special conrod which makes it suitable for use with all 12mm pin pistons.
Reference: NG023
Brand: NG
NG Brake discs for motorcycles, scooters, quads and ATVs, as used by over 30 top manufacturers from Europe and Japan as factory-fitted items. All discs are TÜV Rheinland certified and road legal and come with federal operating approval. OEM-version matches the original item, but some models may vary. Also suitable as replacement for original wave-discs.
Reference: MF84.109
Brand: Motoforce
Motoforce Racing now also offers spring seats with ball bearings, which minimizes the twisting effect of the torque springs. The Twist Control absorbs torsional forces and frictional losses are reduced. Please note that using this seat will increase spring preload, which makes it necessary to adjust the variator. Please only use heat resistant lubricating...
Reference: S6-5614039
Brand: Stage6
The oversize vario from Stage6 - the optimal complement to the Stage6 oversize torque driver. Bigger CVT systems are becoming essential parts for race and midrace engines, extending the whole range of transmission.The Stage6 R/T variator has revised roller curves that have been optimised for usage with R/T engines and accommodate weights in a size of 19 x...
Reference: 31637P2
Brand: Giannelli
Extra exhausts made their way to become a great success. Extra V2 is now the evolution of this benchmark: the muffler is manually welded and the internal cone in perf. sheet gives the best performance keeping the noise under control. The top-down silencer is made in carbon fiber. Exit pipe is painted with transparent finish. Extra V2 are even more...
Reference: A366609
Brand: Scootertuning.ca
Reference: A366615
Brand: Tun'R
Front Fairing Spoiler for Yamaha pre-bug Zuma. It is mounted in place of the original fairing panel.
Reference: 075600/1
Brand: Athena
Attention! : Crankshaft Athena Racing 80cc 43mm stroke required! High performance sport aluminum Cylinder kit made in Italy by Athena. The thermal advantages of aluminum provides these cylinders with better colling and a higher peak power than cast-iron cylinder. Developed with 3D Solid Modelling software creating virtual simulation and verification of...
Reference: MF19.16647
Brand: Motoforce
If you're looking for a bargain replacement cylinder, this might be it! We can offer you this cylinder for a great price. Dimensions are the same as the original ones, so you can use it on public roads. The kit comes with piston and gasket set; cylinder head has to be ordered separately though.
Reference: S410210200013
Brand: Athena
Athena has designed a complete range of air filters for Off-Road ATV, and scooters that are manufactured by using open cells polyurethane. These high quality air filters guarantee a perfect filtering combined with an excellent air flow in each condition of use. Made in Italy.
Reference: 1860-0827
Brand: FMF
Did you know a freshly packed silencer or muffler actually restores power? Our Performance Packing is comprised of fine, blended interwoven fiberglass fibers made to FMF’s specifications for high heat resistance, great sound attenuation and optimum performance and longevity. Look for FMF’s distinctive red performance packing.
Reference: 1CD-F1731-00-P0
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 14270152
Brand: Airsal
Airsal 90cc top end gasket set for Arctic Cat 90, DS90 and Polaris 90.