No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Budget weights by Motoforce, choice of weights. Available in a range of...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Made from high-strength alloy steel with full plate half-shafts, and...
The new aluminium thermal kit represents a performance and technical...
Reference: 31644P2
Brand: Giannelli
Extra exhausts made their way to become a great success. Extra V2 is now the evolution of this benchmark: the muffler is manually welded and the internal cone in perf. sheet gives the best performance keeping the noise under control. The top-down silencer is made in carbon fiber. Exit pipe is painted with transparent finish. Extra V2 are even more...
Reference: S6-1028003/R
Brand: Stage6
The Stage6 brake shoes were developed in cooperation with experienced "Stage6 Cup" race pilots. The goal: brake pads that provide optimum, reliable braking power even under even the most extreme conditions and also last for a long time. Due to the high-quality materials used for the pads and the grooved surface, these brake shoes offer a much more...
Reference: VC23364
Brand: Scootertuning.ca
Blue anodized aluminium kick-starter with solid kicker head, suitable for various Honda and Kymco scooters. Great optical detail.
Reference: NK900.28
Brand: Naraku
Cheap, good quality replacement variator without performance enhancement from NARAKU. Set of weights (16x13 5.5 g) is supplied. Can be used with restricted or unrestricted original variator sleeves. Alternatively, this set is also available with 7.5 g weights.
Reference: BT15526
Brand: Scootertuning.ca
Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mounted with 2 ring clamps onto a special exhaust bracket on the right-hand side of the engine. The second rear shock is also generally mounted to this bracket. For this reason, this system is only suitable for...
Reference: BT13913
Brand: Scootertuning.ca
Adjustable carburettor needle with clip.
Reference: GY28521
Brand: Scootertuning.ca
GY6 150cc complete cylinder head suitable for the 157QMJ engines. This cylinder head is not supplied with a connection for the secondary air system and can be used as a straight forward replacement or a replacement with heads that currently have the SLS secondary air system. Can also be used on the 125cc scooters that have the 150cc big bore fitted. Note:...
Reference: GY6-CSS
Brand: Taida
Taida Oil seal set for 125 and 150cc GY6 engines (152/157QMI).
Reference: GY18252
Brand: Scootertuning.ca
Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.
Reference: GY17958
Brand: Scootertuning.ca
Crankcase cover gasket for Chinese-built scooters with GY6 125/150cc engines. The gasket is solely for the short engine blocks of the 4-stroke models. These engines generally take a 835mm v-belt.
Reference: 619100
Brand: Malossi
The mobile driven split pulley comes from our racing department's many years of experience, and is manufactured with the best possible special nitrided steels in order to ensure a long life. This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible...
Reference: 1112038
Brand: Malossi
Replacement gasket set for the Malossi Sport 70cc I-Tech aprilia SR50 with Aprilia engine.
Reference: IP34503
Brand: Scootertuning.ca
Solid braking performance and good durability at an unbeatable price. For additional assurance, please check the brake pads in the image with those from the vehicle. Delivery as pictured. 101 Octane - replacement parts for scooters, mopeds and motorcycles at an excellent price.
Reference: S6-3314002/VT
Brand: Stage6
The short Stage6 Piaggio intake manifold is an inexpensive and excellent alternative to the rather expensive models of other manufacturers. A short intake tract offers better responsiveness and the intake rpm will be raised even further, which gives more power. So-called biofuels are becoming more and more popular. They may, however, contain up to 20% of...
Reference: NK156.51
Brand: Naraku
Piaggio 50cc Air Cooled cylinder head gasket.
Reference: 1200-1031.5
Brand: NCY
Clutch housings are often overlooked when looking for extra power. Light weight housings allow for quicker acceleration and more efficient cooling. This housing is a perfect upgrade for any bike, stock or dragster! Through constant research NCY continues to bring design concepts to the CVT transmission that are unmatched by any others.
Reference: NK900.78
Brand: Naraku
Naraku clutch spring set for 125/150cc original and Naraku sports clutches for GY6, Kymco, Honda, Malaguti, Keeway Maxi scooters.+1500 rpm +2000rpm on 4-strokes.
Reference: NK900.73
Brand: Naraku
NARAKU high-quality belts. Top Quality design from the biggest belt manufacturer in the world. On most brands of scooters the vehicles are already factory-fitted with a very good and durable belt. Usually an extremely expensive item, but here at a reasonable price. High grip combined with good flex minimise friction losses and transmit the engines power...
Reference: VCR-RD18166
Brand: Voca
The brake caliper adaptator Voca is the most used bracket to install Stage6 and Gyronetics wheel on zuma, you just need to fit it on the crankcase and use with Stage6 RT 4pistons caliper. Your disc brake convertion will be more easy with this parts! Note : You will need a MBK nitro hub with disc brake to install Stage6 and Gyronetics wheels on the Zuma....
Reference: 461989
Brand: Doppler
High Quality small end bearings from Doppler. This specific size is required with Athena 80cc crankshaft.
Reference: 1061446
Brand: Airsal
With the Airsal 70cc, you get an aluminium cylinder for the same price that would normally buy you a common cast-iron cylinder. It has a hardened chrome-nikasil bore, and due to the fact that it is made of aluminium it has better heat dissipation properties than the cast-iron version so that piston seizures are a lot less common. Unfortunately, high top...
Reference: 4320-0717
Brand: Factory Effex
Factory Effex Sticker Sheet features 13"x19" 4mil vinyl sheet of stickers.
Reference: VC18501
Brand: Scootertuning.ca
Complete igntion lock set for Aprilia SR50 Factory and Purejet. Excellent quality and price making this a perfect choice from the usually expensive OEM parts. This lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.
Reference: VCR-RD09.PUMP
Brand: Voca
Reference: 6714530
Brand: Malossi
Malossi is pleased to announce a new rear wheel axle, completing the set of primary and secondary gears! This rear wheel axle is a result of Malossi's twenty years of experience in gear designing and production for road and racing scooters. The rear wheel axle was designed and manufactured to be assembled into the original gear box without any...
Reference: 31073350
Brand: Airsal
In order to fully exploit the 90cc capacity of the Airsal Racing Xtrem cylinder, a matching crankshaft with a stroke of 45mm is required. The matching full-circle crankshaft from Airsal is very well made (visually as well as technically), and with its 45mm stroke, its 85mm conrod and the 12mm small-end bearing it offers slightly higher capacity also for...
Reference: 9930030
Brand: Top performances
Even though made of cast iron, the Top Performances 70cc Cast Iron racing cylinder with excellent performance regarding acceleration as well as top speed. With 8 transfer ports and longer port timings, this cylinder kit is definitely an original design by Top Performances and not just a "remodeled" Sport cylinder. It comes with a one-ring piston (10mm...
Reference: 3219163
Brand: Malossi
These Malossi exhausts have been specially developed for the 94cc BIG BORE Testa rossa cylinders. Expansion chamber in clear finish with beautifully milled and gray anodised rear silencer made of aluminium; definitely characteristic of the Malossi MHR series.
Reference: 17910-GEZ-670
Brand: Honda
Replacement OEM Honda Parts.
Reference: 53212-GEE-000
Brand: Honda
Replacement OEM Honda Parts.
Reference: 1CD-F1721-00-EY
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 5CA-F1815-00-00
Brand: Yamaha
Replacement OEM Yamaha parts.