No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
Polini has revised and expanded its range of roller kit made for Scooter...
The water pump cover "EXTREM CUT"...
Reference: 3602-0147
Brand: Klotz
Recommended for high RPM 2-stroke applications Recommended for power valve engines Improves throttle response Extreme film strength protects engine parts from metal-to-metal contact Clean Burn for low smoke and prevents plug fouling High temperature stability reduces power valve deposits Identifiable Klotz red color and racy scent Blends with gasoline...
Reference: NK900.28
Brand: Naraku
Cheap, good quality replacement variator without performance enhancement from NARAKU. Set of weights (16x13 5.5 g) is supplied. Can be used with restricted or unrestricted original variator sleeves. Alternatively, this set is also available with 7.5 g weights.
Reference: BT15526
Brand: Scootertuning.ca
Some scooters are sent from the factory with two rear shock absorbers. These models mostly use aluminium exhaust systems. These are generally mounted with 2 ring clamps onto a special exhaust bracket on the right-hand side of the engine. The second rear shock is also generally mounted to this bracket. For this reason, this system is only suitable for...
Reference: 1100-1407.1
Brand: NCY
NCY Replacement cylinder gaskets for QMB139 with 52mm big bore kit. NCY Gasket kit. Quality replacement part. Fits NCY 52mm Big Bore Kit #1100-1248
Reference: NK100.19
Brand: Naraku
Complete cylinder gasket set for all 47mm Naraku 4-stroke cylinder sets Kit contains all necessary gaskets from the base upwards and is exactly suited to the Naraku 47mm cylinder sets and Chinese 47mm cylinder sets.
Reference: GY27396
Brand: Scootertuning.ca
150cc Cylinder kit for all 125/150cc 4 stroke Chinese scooters which use the GY6 157QMI or 152QMI engines. Can be used as a direct replacement for 150cc engines as standard or a performance upgrade to 125cc engines. If fitting to a 125cc scooter then necessary up jetting will be required (approx 10%). Kit is supplied with required top end gaskets, barrel,...
Reference: GY18252
Brand: Scootertuning.ca
Fan Wheel for air cooling. This item sits on the alternator rotor and is attached with 4 screws.
Reference: 619100
Brand: Malossi
The mobile driven split pulley comes from our racing department's many years of experience, and is manufactured with the best possible special nitrided steels in order to ensure a long life. This component called Torque Driver for its specific function of determining the exact shifting moment, was calculated to give the vehicle the maximum possible...
Reference: 31640P2
Brand: Giannelli
Extra exhausts made their way to become a great success. Extra V2 is now the evolution of this benchmark: the muffler is manually welded and the internal cone in perf. sheet gives the best performance keeping the noise under control. The top-down silencer is made in carbon fiber. Exit pipe is painted with transparent finish. Extra V2 are even more...
Reference: 1112038
Brand: Malossi
Replacement gasket set for the Malossi Sport 70cc I-Tech aprilia SR50 with Aprilia engine.
Reference: P-PL010/B
Brand: Polini
Complete engine package for Minarelli Vertical. Package include Polini Sport 70cc cylinder kit, Variator Polini Hi-Speed, Exhaust Yasuni Z, Main jet set 80-102 6mm, Spark plug BR9HS, Polini 16x13 6.9g roller and Polini soft torque spring.
Reference: SCT-TS004
Brand: Scootertuning.ca
High Quality ScooterTuning T-Shirt (50% Polyester) with our new 2015 logo!
Reference: S6-140070
Brand: Stage6
The best way to use a 4 piston caliper on a Aerox engine. This item does not work with the 2 OEM brake mounts, it has to be drilled and bolted under the OEM mounts.
Reference: MF84.100
Brand: Motoforce
One of the main things necessary to set up a tuned engine is a stronger torque spring. Torque springs are placed behind the clutch to press the rear pulley to the drive belt. If the spring is too weak, the belt will slip and accelerating becomes impossible. Please note that using a stronger torque spring changes the variator set-up and you may have to...
Reference: 5118238
Brand: Malossi
In time for the 2008 season, Malossi's MHR Oversize variator received a small, but important makeover. The bushing's diameter was increased from 20 to 22mm and its length was increased, which also required a revision of the ramp plate. The variator itself has been left unchanged. In order to ensure efficient transmission shifts, the oversize variator...
Reference: S6-5614039
Brand: Stage6
The oversize vario from Stage6 - the optimal complement to the Stage6 oversize torque driver. Bigger CVT systems are becoming essential parts for race and midrace engines, extending the whole range of transmission.The Stage6 R/T variator has revised roller curves that have been optimised for usage with R/T engines and accommodate weights in a size of 19 x...
Reference: 31637P2
Brand: Giannelli
Extra exhausts made their way to become a great success. Extra V2 is now the evolution of this benchmark: the muffler is manually welded and the internal cone in perf. sheet gives the best performance keeping the noise under control. The top-down silencer is made in carbon fiber. Exit pipe is painted with transparent finish. Extra V2 are even more...
Reference: VC18521
Brand: Scootertuning.ca
Complete igntion lock set for Kymco Vitality 50 and Yup 50. Excellent quality and price making this a perfect choice from the usually expensive OEM parts. This lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.
Reference: VC18501
Brand: Scootertuning.ca
Complete igntion lock set for Aprilia SR50 Factory and Purejet. Excellent quality and price making this a perfect choice from the usually expensive OEM parts. This lock sets cover all the locks and locking systems found on your vehicle and come with two new keys.
Reference: A366609
Brand: Scootertuning.ca
Reference: A366615
Brand: Tun'R
Front Fairing Spoiler for Yamaha pre-bug Zuma. It is mounted in place of the original fairing panel.
Reference: S6-195020
Brand: Stage6
Stage6 handlebar grips in Stickerbomb look, for a bit of urban style customizing. The new grips combine various Stage6 and Stage6 R/T logos in a wild graffiti design, which is permanently protected by a high-quality transparent coating. The grips are comfortable to hold and have a non-slip coating. The inner flange is reinforced to provide optimum support...
Reference: 6714530
Brand: Malossi
Malossi is pleased to announce a new rear wheel axle, completing the set of primary and secondary gears! This rear wheel axle is a result of Malossi's twenty years of experience in gear designing and production for road and racing scooters. The rear wheel axle was designed and manufactured to be assembled into the original gear box without any...
Reference: 90208-14047-00
Brand: Yamaha
Replacement OEM Yamaha Parts.
Reference: S410210200013
Brand: Athena
Athena has designed a complete range of air filters for Off-Road ATV, and scooters that are manufactured by using open cells polyurethane. These high quality air filters guarantee a perfect filtering combined with an excellent air flow in each condition of use. Made in Italy.
Reference: 1860-0827
Brand: FMF
Did you know a freshly packed silencer or muffler actually restores power? Our Performance Packing is comprised of fine, blended interwoven fiberglass fibers made to FMF’s specifications for high heat resistance, great sound attenuation and optimum performance and longevity. Look for FMF’s distinctive red performance packing.
Reference: 17910-GEZ-670
Brand: Honda
Replacement OEM Honda Parts.
Reference: 4C6-F3411-10-00
Brand: Yamaha
Replacement OEM Yamaha parts.
Reference: 83400-GS7-000/OR
Brand: Scootertuning.ca
Reference: 14270152
Brand: Airsal
Airsal 90cc top end gasket set for Arctic Cat 90, DS90 and Polaris 90.
Reference: S6-1028003/R
Brand: Stage6
The Stage6 brake shoes were developed in cooperation with experienced "Stage6 Cup" race pilots. The goal: brake pads that provide optimum, reliable braking power even under even the most extreme conditions and also last for a long time. Due to the high-quality materials used for the pads and the grooved surface, these brake shoes offer a much more...
Reference: GY14624
Brand: Scootertuning.ca
This brake cylinder assembly is suitable for 125 and 150cc GY6 4-stroke Chinese-built scooters with rear brake discs. Supplied complete with hand lever and brake light switch. Delivery as shown.
Reference: MOT112954
Brand: Motul
Hydraulic Fluid for any telescopic fork. 4 Viscosities: Light-Medium-Medium/Heavy-Heavy. Contains an Anti-Friction additive developed by Motul, making easier sliding, avoiding drag in the fork • Stable absorbing in an extended range of temperature • Protection of seals: excellent oil/ elastomer compatibility. Anti wear, anti corrosion, anti foaming
Reference: BT14731
Brand: Scootertuning.ca
Mid-crankcase gasket. This gasket seals the left and right hand sides together. Required when changing the crank or completely splitting the cases.
Reference: BT13913
Brand: Scootertuning.ca
Adjustable carburettor needle with clip.