Top sellers

• 

  CAD$ 55.99 In stock

  Reference: BZA19028

  Brand: Buzzetti

  

  Center Stand Buzzetti (CPI-Vento-Keeway)

  Reinforced top quality replacement center stand from Italian manufacturer Buzzetti for CPI, Keeway, Generic and Chinese 2-stroke imports with 12 inch wheels. The main stand is supplied with required fixings as shown in product image.

  CAD$ 55.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 15.99 In stock

  Reference: BT10007

  Brand: Scootertuning.ca

  

  Oil pump assembly (16 tooth) GY6 50cc 139QMB/QMA

  139QMB/QMA engines currently have 2 crank variations factory-fitted. The differences are solely in the oil pump drive gear. The crank can be kitted with either 16 or 22 teeth. This also means two different oil pumps are used. The item pictured is the 16 tooth version.

  CAD$ 15.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 119.99 In stock

  Reference: BT7001-22

  Brand: Scootertuning.ca

  

  Replacement Crankshaft (22 tooth) GY6 50cc

  Original quality aftermarket crank for 50/90cc 4-stroke engines (GY6 50, 139QMB/QMA. The crank is pre-pressed with main bearings and rod. GY6 engines are factory-fitted with 2 different versions of crank. The only difference is the oil pump drive cog on the right-hand side. The old version, installed in almost all vehicles, has a 16 tooth cog. The new...

  CAD$ 119.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 73.99 In stock

  Reference: GY6-gear1736

  Brand: Taida

  

  Secondary Gear Kit Taida 17/36 +31% for GY6 125-150cc

  Taida gears set longer by 31% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number...

  CAD$ 73.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 73.99 In stock

  Reference: GY6-gear1537

  Brand: Taida

  

  Secondary Gear Kit Taida 15/37 +20% for GY6 125-150cc

  Taida gears set longer by 20% from the original (14/39 teeth) which will provide higher top end speed without loosing power on acceleration. These gears fit to all 125 and 150cc GY6 engines (152/157QMI). Please note: There are variants within the imported Chinese scooters so we would seriously recommend you remove the old gears and ensure count the number...

  CAD$ 73.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: NK600.54

  Brand: Naraku

  

  Cylinder gasket set Naraku 150cc for GY6 125-150cc

  These sets contain all the necessary gaskets from the cylinder base upwards. These can be used on Naraku 4-stroke cylinders (NK600.52), but are also suitable for 150cc GY6 original cylinders and 150cc cylinder sets from other manufacturers. Please note: If purchasing this kit for the Sym 125cc scooters, please ensure your engine is the GY6 version...

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 345.99 Out of stock

  Reference: 0900-1012.1

  Brand: NCY

  

  Oil Cooler NCY for GY6 125-150cc

  This oil cooler kit is the perfect addition to your high performance or bone stock GY6. More oil and cooler oil both equal lower engine temperatures, longer oil life and longer engine life in all riding conditions. Includes all hardware and lines to install. Will fit almost any engine with 17mm screen filter housing.

  CAD$ 345.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 4.99 In stock

  Reference: BT80005

  Brand: Scootertuning.ca

  

  Oil dip stick with o-ring for GY6 50-150cc

  Oil dip stick for GY6 50ccm, 125cc and 150cc engines. Includes O-ring.

  CAD$ 4.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 28.99 In stock

  Reference: 33950

  Brand: Scootertuning.ca

  

  Kick starter shaft for GY6 125-150cc (152QMI/157QMJ)

  As original kick-start shaft. A defective shaft is often the cause of sticking kick-starts, or noises when starting.

  CAD$ 28.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 250.00 In stock

  Reference: SCT-GC250

  Brand: Scootertuning.ca

  

  Gift Card ScooterTuning 250$

  Don't know what to get for your loved ones? Our gift card is the ideal choice to let your loved one choose from a selection of more than 3000 products! Once you order the gift card, we will email you within 24 hours a printable gift certificate that you can fill in.

  CAD$ 250.00

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 149.99 Out of stock

  Reference: CH-1026/RE

  Brand: Chimera

  

  Lower Seat Chimera Red Honda Ruckus

  Chimera Lowered Seat Frame is one of the best modification that you could do to a Honda Ruckus. Not only will it give you a lower seat position (which makes riding very comfortable), but it will also reduce wind drag which in turns gives you better MPH/MPG (for most)! Seating position is also moved further towards the back!

  CAD$ 149.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 224.99 Out of stock

  Reference: POL-KTK-CP19

  Brand: Polini

  

  Carburetor kit Polini CP 19mm (Genuine-PGO-Kymco)

  Polini CP Carburetor kit adapted for Kymco / PGO / Genuine intake manifold. The kit include the carb, the intake adaptor and the choke cable. We recommend to purchase a jet kit in order to adjust the carburetor with your engine. Polini CP need PWK / CP jet kit.

  CAD$ 224.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 106.99 In stock

  Reference: 2713719.C0

  Brand: Malossi

  

  Reed Valve Malossi VL16 Piaggio

  Malossi’s traditional VL reed valve has been completely revised. The reeds have been increased by 42%, which provides more volume, and the body’s bridge has been eliminated. The valve comes with 0.3mm thick 90° carbon reeds and a 28mm stuffer. Attention! The crankcase must be modified at the intake for the reed valve to fit!

  CAD$ 106.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 24.99 In stock

  Reference: 1200-1026.10

  Brand: NCY

  

  Torque Spring NCY GY6 125/150cc (1000rpm)

  Compression springs do a couple of things. First they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. This NCY 1000 rpm compression spring is specifically for the GY6. Dimensions: Spring I.D.: 48.5mm / Spring...

  CAD$ 24.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 129.99 Available in 4-20 days

  Reference: WB-5070

  Brand: Buzzetti

  

  Crankshaft Bearing Puller Buzzetti

  This is an indispensable tool that you will need when taking off main bearings without damaging the intact crankshaft. It is definitely a must-have with racing set-ups, where the main bearings have to be replaced more often in order to prevent subsequent damage.

  CAD$ 129.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 33.99 In stock

  Reference: MF99.00102

  Brand: Motoforce

  

  Snap ring pliers Motoforce incl. 4 attachments

  This is a universal circlip pliers set with 5 replaceable tips, covering a wide range of uses. This way, they can be used either to grip Seeger-type circlips (snap rings) securely for removal and installation, but also e.g. to insert clutch springs.

  CAD$ 33.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 799.99 Out of stock

  Reference: SCT-1261276

  Brand: Ruckhouse

  

  Wheel Set Ruckhouse Superstar (12x6-12x4)

  Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set.

  CAD$ 799.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 799.99 In stock

  Reference: SCT-1261280

  Brand: Ruckhouse

  

  Wheel Set Ruckhouse 8-Spoke V2 (12x6-12x4)

  Ruckhouse Custom 6061 heat treated aircraft grade aluminium wheel set. Screws are NOT included!

  CAD$ 799.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 59.99 Out of stock

  Reference: VCR-RD72140/C4

  Brand: Voca

  

  Crankshaft bearings VOCA C4 Viton Piaggio

  High quality crankshaft bearings VOCA C4. Includes VITON oil seals. Piaggio scooters.

  CAD$ 59.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 21.99 Out of stock

  Reference: 4320-0713

  Brand: Factory Effex

  

  Sticker kit FX Sponsor (B)

  Factory Effex Sticker Sheet features 13"x19" 4mil vinyl sheet of stickers.

  CAD$ 21.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 129.99 Product available with different options

  Reference: STR-500.50

  Brand: Str8

  

  Water pump cover STR8 with drills Minarelli

  We can offer you this very precisely manufactured and polished water pump cover from STR8 as an exclusive. The meshed design makes this cover a real gem! Attention: limited edition!!

  CAD$ 129.99

  More

  Product available with different options

  Add to Compare
• 

  CAD$ 159.99 Out of stock

  Reference: 1131140

  Brand: Airsal

  

  Cylinder kit Airsal ALU-SPORT 50cc 10mm Minarelli Vertical

  We can offer you the Airsal 50cc Sport for the most common scooter models. It has a chrome-nikasil coated bore and is made of aluminium, which has better heat dissipation properties than cast-iron cylinders. The performance is comparable with the Polini Sport. A bigger carb is not necessary, but the main jet should be adjusted. (10mm gudgeon pin)

  CAD$ 159.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 159.99 Out of stock

  Reference: P18461

  Brand: Replay

  

  CVT Cover Replay Chrome (Bws/Zuma 1988-2001)

  CAD$ 159.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 169.99 In stock

  Reference: MVT-RJ34/81

  Brand: MVT

  

  CDI Unit MVT Digital Direct (DD19)

  Replacement CDI for MVT Digital Direct ignition. The advantage of the Digital direct CDI is the variable ignition curve not offered on the MVT premium, meaning that ignition advance is rev-dependent in order to max out performance at all RPM. Can be used as improve on the Premium (PREM19) Ignition.

  CAD$ 169.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 116.99 In stock

  Reference: S6-4516604

  Brand: Stage6

  

  Flywheel for Stage6 R/T ignition

  This flywheel disc is available as an additional part for the Stage6 R/T internal rotor ignition. Using this part results in the engine revving up more slowly, but also yields a much smoother response, which is important especially in circuit racing. Depending on the set-up, it can also increase revs! Due to manufacturing tolerances, shimming may be...

  CAD$ 116.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 139.99 Available in 4-20 days

  Reference: 244.0128

  Brand: Polini

  

  Front Pulley Polini Evolution Ceramic (12.5°) Minarelli

  V-belt pulley from the Ceramic Air Speed Evolution range, for Minarelli engines. The pulleys are manufactured from a single block of material, alloy coated and then ceramically treated. The larger fan wheel reduces the temperature in the engine housing and reduces wear.

  CAD$ 139.99

  Add to cart More

  Available in 4-20 days

  Add to Compare
• 

  CAD$ 52.99 In stock

  Reference: 2312806B

  Brand: Malossi

  

  Variator bush Malossi MHR Overrange (16mm)

  Replacement parts for Malossi MHR Overrange variator.

  CAD$ 52.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 669.99 In stock

  Reference: 200.0295

  Brand: Polini

  

  Exhaust System Evolution III Minarelli Horizontal

  Polini now also offers the Evolution 3 exhaust for Minarelli. It has been designed with the Evolution 3 cylinder kit in mind and, if set up with suitable high-end components, a performance of more than 20 hp can be expected. Bigger changes have not been made. The Evo 3 comes with a big black aluminium rear silencer and a split flange; has been embellished...

  CAD$ 669.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 52.99 In stock

  Reference: NK100.68

  Brand: Naraku

  

  Crankshaft Bearings Naraku (Hyosung)

  Naraku HD (Heavy Duty) crank main bearing set. Set contains left and right crank bearings in metal cage and relevant shaft seals. Only bearings with C3 bearing clearance from NTN or KOYO used. Please note! When changing the crank, always use new bearings and seals.

  CAD$ 52.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 4.99 Out of stock

  Reference: 5SU-F3145-00-00

  Brand: Yamaha

  

  Fork Seal (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 4.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 10.99 Out of stock

  Reference: 5ML-H4714-00-00

  Brand: Yamaha

  

  Tail Light Bulb (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 10.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 28.99 In stock

  Reference: 1CD-H3310-01-00

  Brand: Yamaha

  

  Front Indicator light (Left) (Zuma 50F 2012+)

  Replacement OEM Yamaha parts.

  CAD$ 28.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 102.99 In stock

  Reference: 8360A-GS7-000/OR

  Brand: Scootertuning.ca

  

  Left Side Cover Honda Elite Orange

  CAD$ 102.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 299.99 Out of stock

  Reference: EJK-8110049

  Brand: EJK

  

  Fuel Injection Controller EJK (Honda Grom)

  Less shop time means more ride time. The Electronic Jet Kit (EJK) is the #1 EFI controller on the market for installation time to riding with great performance. Plug and play does not just refer to connectors to make installation easy, but the EJK comes programmed and ready to go for stage 1 (after-market pipe and air cleaner) modifications. Forget...

  CAD$ 299.99

  Add to cart More

  Out of stock

  Add to Compare
• 

  CAD$ 18.99 In stock

  Reference: 243.075

  Brand: Polini

  

  Torque Spring Polini +15% Bws / Zuma 125

  These Polini counterpressure springs increase pressure by 15%, making them ideal for light tuning. When the level of tune increases, so too should the strength of the springs. Variator must be calibrated if springs are changed. Original Spring Loading: 45/31.5mm/kg - Polini Spring Loading: 45/37mm/kg - Spring Thickness: 4.1mm - Spring Length: 115mm -...

  CAD$ 18.99

  Add to cart More

  In stock

  Add to Compare
• 

  CAD$ 14.99 Out of stock

  Reference: DIO-gas-060CH55

  Brand: Taida

  

  Cylinder kit gasket Taida Liquid Cooled 125-130cc (V2) AF16 - AF18

  Replacement Taida Cylinder gasket for 125-130cc liquid cooled V2 cylinder.

  CAD$ 14.99

  Add to cart More

  Out of stock

  Add to Compare