No products
High-quality replacement gudgeon pin circlips from Malossi for 10mm and...
The HAT weights are very durable and self lubricating. Available in a...
Replacement reed valve gasket for all Minarelli Horizontal engines.
In order to offer optimal handling, a dragrace handlebar should be...
Budget weights by Motoforce, choice of weights. Available in a range of...
The thermal grade of the spark-plug is of prime importance with tuning...
We can offer high-quality exhaust gaskets for all common original, sport...
Replacement Piston for the Stage 6 Streetrace 70cc Minarelli Vertical
This Low Down Shock is constructed of an anodized black billet body,...
BLACK SERIES is The Two Brothers...
Viewed products
New version available since September 2005....
Malossi draw on 20 years of tuning...
Technical Specifications : Clutch Bell forged...
An aggressive line of aerodynamic and...
View larger
New version available since September 2005. This is the complete kit from the Malossi Hyper Racing (MHR) series. It consists of the complete rear pulleys (fixed and movable halves) contra spring, MHR variator, fixed half of the vario and oversize drive belt. Thanks to the larger rear-pulleys the range of transmission is increased which results in advantages such as better acceleration and better adjustment. Included in the current kit are a newly developed variomatic with 19x15.5mm rollers which allow for smoother engine running and easier adjustment. Attention, this kit can only be used with engines that come with 3-shoe-clutches and a clutch bell with 107mm inner diameter.
In stock
Reference: 0812036
Brand: Malossi
Malossi Minarelli torque corrector spacer set.
Reference: 2011754
Brand: Malossi
A practical kit from Malossi to refurbish the MHR torque corrector bearings. It is suitable for the following parts: Torque corrector Malossi MHR 2005 (619733)Torque corrector Malossi MHR 2013 (6114590)Polini Evolution torque corrector (244.0574)Stage6 R/T Torque Corrector (S6-5616615)2Fast Passion torque corrector (TRT8000)Teknix torque corrector...
Reference: 069854E
Brand: Malossi
Replacemet O-ring set for the MHR Overange 2005 rear pulley.
Reference: 7615375B
Brand: Malossi
The new MALOSSI 7.1 MHR GREASE, recommended for use in extreme conditions or with operating temperatures up to 160° C. MALOSSI 7.1 MHR GREASE is recommended for the lubrication of scooter variators and rear pulley assemblies, operating under severe load and temperature conditions; specifically it guarantees perfect lubrication between the hub and half...
Polini carburetors are lodged a flat slide lightweight chrome alloy, highly...
Fuel hose with a length of 1m, interior diameter 5mm. Available in many cool...
This Kevlar reinforced drive belt is an absolute must-have for racing and...
Torque springs are important for the transmission set-up. The spring...
Attention! Only made for MHR Team crankshaft unsplined! With the MHR vario...
Low-cost aftermarket kickstarter shaft [semi-circle], for 2-stroke...
Reference: 6111121
Brand: Malossi
New version since November 2006. This is the complete rear pulley from the...
Reference: 6115991
Brand: Malossi
The new Oversize torque Pulley MHR Aluminium 2013 for Minarelli Horizontal...
Reference: 6112812
Brand: Malossi
New version available since September 2005. This is the complete kit from the...
Reference: 6118885
Brand: Malossi
Malossi’s overrange kit has been completely revised and now goes under the...